[LEDE-DEV] Archer C7(v2) - Question

[Jens DPunkt]

Hi,

im new on lede and im a user, no dev. Hope its ok to ask.
I got an archer c5 flashed to a C7 (works perfect since month with openwrt).

I stumbled over messages - and i dont no if this is also on openwrt.
Looks like there are not a problem (wifi works)


root at Archer-Lede:/# dmesg | grep ath10
[    9.291627] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1
irq_mode 0 reset_mode 0
[    9.514635] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[    9.525521] ath10k_pci 0000:01:00.0: Falling back to user helper
[    9.617803] firmware ath10k!pre-cal-pci-0000:01:00.0.bin:
firmware_loading_store: map pages failed
[    9.981761] ath10k_pci 0000:01:00.0: qca988x hw2.0 target
0x4100016c chip_id 0x043202ff sub 0000:0000
[    9.991164] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[   10.004239] ath10k_pci 0000:01:00.0: firmware ver 10.2.4.70.54 api
5 features no-p2p,raw-mode,mfp crc32 9d340dd9
[   10.014664] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[   10.025265] ath10k_pci 0000:01:00.0: Falling back to user helper
[   10.104231] firmware ath10k!QCA988X!hw2.0!board-2.bin:
firmware_loading_store: map pages failed
[   10.119436] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A
crc32 bebc7c08
[   11.250688] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2
cal file max-sta 128 raw 0 hwcrypto 1
[  328.294935] ath10k_pci 0000:01:00.0: DFS region 0x0 not supported,
will trigger radar for every pulse
root at Archer-Lede:/#

Regards