[LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists
zajec5 at gmail.com
Thu Oct 20 07:30:33 PDT 2016
On 20 October 2016 at 16:12, Karl Palsson <karlp at tweak.net.au> wrote:
> Rafał Miłecki <zajec5 at gmail.com> wrote:
>> On 20 October 2016 at 08:11, Chris Blake
>> <chrisrblake93 at gmail.com> wrote:
>> > I agree that would work in terms of functionality, but the issue with
>> > that logic is if you hold the button over 5 seconds, the system LED
>> > will start flashing (as expected) but then no action is taken on the
>> > board. The reason for my logic change was just to ensure the board
>> > would reboot in that case.
>> That would just as confusing for the user. If jffs2reset is
>> unsupported on a device, make sure we also don't start
>> It will be more clear that way: user keeps RESET pressed for 5+
>> seconds, LED doesn't start blinking, device doesn't reboot. It
>> somehow indicated factory reset wasn't started.
> Should this actually be fixed by having the button handler just
> call "firstboot" (and fixing it there if necessary) rather than
> explicitly within the button handler?
Calling "firstboot" helper sounds OK, but we still need to avoid LED
blinking if factory reset is not supported.
More information about the Lede-dev