[LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2
Gareth Parker
gareth41 at orcon.net.nz
Wed Oct 19 02:56:47 PDT 2016
Hi Piotr
Thanks for your input, I have fixed up all the issues in my patch and was
about to re-submit it, however having seen your email below what would be
the best approach from here?
I can submit my patch as is if you want? Then you can move all comfast
devices into one mach file later?
I also have a cf-e355ac which I'm going to be submitting a patch for, plus
my company is also going to be importing more comfast gear soon (outdoor
high power ap's) and hence will be adding support for this also.
Cheers,
Gareth
-----Original Message-----
From: Lede-dev [mailto:lede-dev-bounces at lists.infradead.org] On Behalf Of
Piotr Dymacz
Sent: Wednesday, 19 October 2016 4:32 p.m.
To: Gareth Parker
Cc: LEDE Development List; gareth at zappie.net.nz
Subject: Re: [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2
Hello Gareth,
Please, take a look how I made support for other Comfast devices (QCA953x
based) [1].
I will rebase, update and send PR when I'm back from my holidays.
Maybe we could keep everything in one mach-*.c file as there are some common
parts, ex. timer for external watchdog.
[1]
https://github.com/pepe2k/lede-project-source/commit/9bb9b210ad483611304a2f6
bcba418866b550e17
Cheers,
Piotr
2016-10-17 19:14 GMT+09:00 Gareth Parker <gareth41 at orcon.net.nz>:
> The Comfast E380AC is a single port PoE Dual Band AP.
>
> There are two versions which are only identifiable through the web
administration interface, v1 has 128mb ram and a uboot size of 128k, v2 has
256mb ram and a uboot size of 256k, the remaining hardware and PCB markings
are the same.
>
> The factory firmware is built on openwrt and will accept a sysupgrade
file, this patch produces two sysupgrade files for both versions.
>
> Signed-off-by: Gareth Parker <gareth41 at orcon.net.nz>
> ---
> target/linux/ar71xx/base-files/etc/diag.sh | 4 +
> .../etc/hotplug.d/firmware/11-ath10k-caldata | 5 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 12 ++
> target/linux/ar71xx/config-4.4 | 1 +
> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 +
> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c | 197
++++++++++++++++++++
> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 2 +
> target/linux/ar71xx/image/generic.mk | 18 ++
> 10 files changed, 256 insertions(+)
> create mode 100644
> target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c
>
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
> b/target/linux/ar71xx/base-files/etc/diag.sh
> index d6e257d..c8e6b48 100644
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -82,6 +82,10 @@ get_status_led() {
> cf-e316n-v2)
> status_led="$board:blue:wan"
> ;;
> + cf-e380ac-v1|\
> + cf-e380ac-v2)
> + status_led="cfe380ac:green"
> + ;;
> cpe510)
> status_led="tp-link:green:link4"
> ;;
> diff --git
> a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-cald
> ata
> b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-cald
> ata
> index 0e93feb..7598a83 100644
> ---
> a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-cald
> ata
> +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-
> +++ caldata
> @@ -47,6 +47,11 @@ board=$(ar71xx_board_name) case "$FIRMWARE" in
> "ath10k/cal-pci-0000:00:00.0.bin")
> case $board in
> + cf-e380ac-v1 | \
> + cf-e380ac-v2)
> + ath10kcal_extract "art" 20480 2116
> + ath10kcal_patch_mac $(macaddr_add $(cat
/sys/class/net/eth0/address) +3)
> + ;;
> dlan-pro-1200-ac)
> ath10kcal_extract "art" 20480 2116
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index dae6fb2..fb017f5 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -488,6 +488,12 @@ ar71xx_board_detect() {
> *"COMFAST CF-E316N v2")
> name="cf-e316n-v2"
> ;;
> + *"COMFAST CF-E380AC-V1")
> + name="cf-e380ac-v1"
> + ;;
> + *"COMFAST CF-E380AC-V2")
> + name="cf-e380ac-v2"
> + ;;
> *"CPE210/220")
> name="cpe210"
> tplink_pharos_board_detect diff --git
> a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 559f97d..2463587 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -495,6 +495,16 @@ platform_check_image() {
> alfa_check_image "$1" && return 0
> return 1
> ;;
> +
> + cf-e380ac-v1|\
> + cf-e380ac-v2)
> + [ "$magic_long" != "27051956" ] && {
> + echo "Invalid image type."
> + return 1
> + }
> + return 0
> + ;;
> +
> wndr3700|\
> wnr1000-v2|\
> wnr2000-v3|\
> @@ -597,6 +607,8 @@ platform_do_upgrade() {
> om5p)
> platform_do_upgrade_openmesh "$ARGV"
> ;;
> + cf-e380ac-v1|\
> + cf-e380ac-v2|\
> uap-pro|\
> unifi-outdoor-plus)
> MTD_CONFIG_ARGS="-s 0x180000"
> diff --git a/target/linux/ar71xx/config-4.4
> b/target/linux/ar71xx/config-4.4 index 7aeac89..9232c4c 100644
> --- a/target/linux/ar71xx/config-4.4
> +++ b/target/linux/ar71xx/config-4.4
> @@ -60,6 +60,7 @@ CONFIG_ATH79_MACH_CAP324=y
> CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_CARAMBOLA2=y
> CONFIG_ATH79_MACH_CF_E316N_V2=y
> +CONFIG_ATH79_MACH_CF_E380AC=y
> CONFIG_ATH79_MACH_CPE510=y
> CONFIG_ATH79_MACH_CR3000=y
> CONFIG_ATH79_MACH_CR5000=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> index 4cefde1..340d6f3 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> @@ -1623,6 +1623,16 @@ config ATH79_MACH_CF_E316N_V2
> select ATH79_DEV_USB
> select ATH79_DEV_WMAC
>
> +config ATH79_MACH_CF_E380AC
> + bool "COMFAST CF-E380AC board support"
> + select SOC_QCA955X
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> + select ATH79_DEV_LEDS_GPIO
> + select ATH79_DEV_M25P80
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> config ATH79_MACH_BHU_BXU2000N2_A
> bool "BHU BXU2000n-2 rev. A support"
> select SOC_AR934X
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> index 5e7a811..e364dbe 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_ATH79_MACH_CAP324) +=
mach-cap324.o
> obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
> obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
> obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
> +obj-$(CONFIG_ATH79_MACH_CF_E380AC) += mach-cf-e380ac.o
> obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
> obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
> obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o
> diff --git
> a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c
> new file mode 100644
> index 0000000..47a848c
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e380ac.c
> @@ -0,0 +1,197 @@
> +/*
> + * COMFAST cf-e380ac board support
> + *
> + * There are two versions for this board, the only difference being
> +v1 has
> + * a u-boot size of 128k and v2 has a u-boot size of 256k. The
> +hardware
> + * is the same. Version numbers are printed in the factory firmware
> +web
> + * administration.
> + *
> + * Copyright (C) 2016 Gareth Parker <gareth41 at orcon.net.nz>
> + *
> + * This program is free software; you can redistribute it and/or
> +modify it
> + * under the terms of the GNU General Public License version 2 as
> +published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/pci.h>
> +#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/ath9k_platform.h>
> +#include <linux/etherdevice.h>
> +#include <linux/ar8216_platform.h>
> +#include <linux/platform_data/phy-at803x.h>
> +
> +#include <asm/mach-ath79/irq.h>
> +#include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "common.h"
> +#include "dev-ap9x-pci.h"
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-usb.h"
> +#include "dev-wmac.h"
> +#include "dev-nfc.h"
> +#include "machtypes.h"
> +#include "pci.h"
> +
> +#define CF_E380AC_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define CF_E380AC_KEYS_DEBOUNCE_INTERVAL (3 *
> +CF_E380AC_KEYS_POLL_INTERVAL)
> +
> +#define CF_E380AC_GPIO_WATCHDOG 17
> +
> +#define CF_E380AC_GPIO_BTN_RESET_WPS 19
> +
> +#define CF_E380AC_GPIO_LED_RED 3
> +#define CF_E380AC_GPIO_LED_GREEN 0
> +#define CF_E380AC_GPIO_LED_BLUE 2
> +
> +#define CF_E380AC_WMAC_CALDATA_OFFSET 0x1000
> +#define CF_E380AC_PCIE_CALDATA_OFFSET 0x5000
> +
> +static struct gpio_led cf_e380ac_leds_gpio[] __initdata = {
> + {
> + .name = "cfe380ac:red",
> + .gpio = CF_E380AC_GPIO_LED_RED,
> + .active_low = 0,
> + },
> + {
> + .name = "cfe380ac:green",
> + .gpio = CF_E380AC_GPIO_LED_GREEN,
> + .active_low = 0,
> + },
> + {
> + .name = "cfe380ac:blue",
> + .gpio = CF_E380AC_GPIO_LED_BLUE,
> + .active_low = 0,
> + },
> +
> +};
> +
> +static struct gpio_keys_button cf_e380ac_gpio_keys[] __initdata = {
> + {
> + .desc = "Reset button/WPS button",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = CF_E380AC_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = CF_E380AC_GPIO_BTN_RESET_WPS,
> + .active_low = 1,
> + },
> +};
> +
> +static struct at803x_platform_data cf_e380ac_at803x_data = {
> + .disable_smarteee = 1,
> +};
> +
> +static struct mdio_board_info cf_e380ac_mdio0_info[] = {
> + {
> + .bus_id = "ag71xx-mdio.0",
> + .phy_addr = 0,
> + .platform_data = &cf_e380ac_at803x_data,
> + },
> +};
> +
> +static struct timer_list gpio_watchdog;
> +
> +static void gpio_watchdog_init(unsigned long period) {
> + static int state;
> + state = !state;
> + gpio_set_value(CF_E380AC_GPIO_WATCHDOG, state);
> + mod_timer(&gpio_watchdog, jiffies + period); }
> +
> +static void __init cf_e380ac_v1_setup(void) {
> + u8 *art = (u8 *) KSEG1ADDR(0x1f020000);
> + u8 wlan0_mac[ETH_ALEN];
> + u8 wlan1_mac[ETH_ALEN];
> +
> + gpio_request(CF_E380AC_GPIO_WATCHDOG, "watchdog init");
> + gpio_direction_output(CF_E380AC_GPIO_WATCHDOG, 0);
> + setup_timer(&gpio_watchdog, gpio_watchdog_init,
msecs_to_jiffies(500));
> + gpio_watchdog_init(msecs_to_jiffies(1));
> +
> + ath79_register_m25p80(NULL);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_leds_gpio),
> + cf_e380ac_leds_gpio);
> + ath79_register_gpio_keys_polled(-1, CF_E380AC_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(cf_e380ac_gpio_keys),
> + cf_e380ac_gpio_keys);
> +
> + ath79_register_usb();
> +
> + ath79_init_mac(wlan0_mac, art, 1);
> + ath79_init_mac(wlan1_mac, art, 3);
> +
> + ath79_register_wmac(art + CF_E380AC_WMAC_CALDATA_OFFSET,
wlan0_mac);
> + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
> +
> + ath79_register_mdio(0, 0x0);
> + mdiobus_register_board_info(cf_e380ac_mdio0_info,
> + ARRAY_SIZE(cf_e380ac_mdio0_info));
> +
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
> + ath79_eth0_data.phy_mask = BIT(0);
> + ath79_eth0_pll_data.pll_10 = 0xB0001313;
> + ath79_eth0_pll_data.pll_100 = 0xB0000101;
> + ath79_eth0_pll_data.pll_1000 = 0xBE000000;
> + ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
> + ath79_register_eth(0);
> +
> + ap91_pci_init(art + CF_E380AC_PCIE_CALDATA_OFFSET, wlan1_mac);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_CF_E380AC_V1, "CF-E380AC-V1", "COMFAST
CF-E380AC-V1",
> + cf_e380ac_v1_setup);
> +
> +static void __init cf_e380ac_v2_setup(void) {
> + u8 *art = (u8 *) KSEG1ADDR(0x1f040000);
> + u8 wlan0_mac[ETH_ALEN];
> + u8 wlan1_mac[ETH_ALEN];
> +
> + gpio_request(CF_E380AC_GPIO_WATCHDOG, "watchdog init");
> + gpio_direction_output(CF_E380AC_GPIO_WATCHDOG, 0);
> + setup_timer(&gpio_watchdog, gpio_watchdog_init,
msecs_to_jiffies(500));
> + gpio_watchdog_init(msecs_to_jiffies(1));
> +
> + ath79_register_m25p80(NULL);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_leds_gpio),
> + cf_e380ac_leds_gpio);
> + ath79_register_gpio_keys_polled(-1, CF_E380AC_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(cf_e380ac_gpio_keys),
> + cf_e380ac_gpio_keys);
> +
> + ath79_register_usb();
> +
> + ath79_init_mac(wlan0_mac, art, 1);
> + ath79_init_mac(wlan1_mac, art, 3);
> +
> + ath79_register_wmac(art + CF_E380AC_WMAC_CALDATA_OFFSET,
wlan0_mac);
> + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
> +
> + ath79_register_mdio(0, 0x0);
> + mdiobus_register_board_info(cf_e380ac_mdio0_info,
> + ARRAY_SIZE(cf_e380ac_mdio0_info));
> +
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
> + ath79_eth0_data.phy_mask = BIT(0);
> + ath79_eth0_pll_data.pll_10 = 0xB0001313;
> + ath79_eth0_pll_data.pll_100 = 0xB0000101;
> + ath79_eth0_pll_data.pll_1000 = 0xBE000000;
> + ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
> + ath79_register_eth(0);
> +
> + ap91_pci_init(art + CF_E380AC_PCIE_CALDATA_OFFSET, wlan1_mac);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_CF_E380AC_V2, "CF-E380AC-V2", "COMFAST
CF-E380AC-V2",
> + cf_e380ac_v2_setup);
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> index e3611dc..d5fc5fd 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> @@ -51,6 +51,8 @@ enum ath79_mach_type {
> ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
> ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
> ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
> + ATH79_MACH_CF_E380AC_V1, /* COMFAST CF-E380AC-V1 */
> + ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC-V2 */
> ATH79_MACH_CPE210, /* TP-LINK CPE210 */
> ATH79_MACH_CPE510, /* TP-LINK CPE510 */
> ATH79_MACH_CR3000, /* PowerCloud CR3000 */
> diff --git a/target/linux/ar71xx/image/generic.mk
> b/target/linux/ar71xx/image/generic.mk
> index 0307b26..43c2d62 100644
> --- a/target/linux/ar71xx/image/generic.mk
> +++ b/target/linux/ar71xx/image/generic.mk
> @@ -27,6 +27,24 @@ define Device/cf-e316n-v2 endef TARGET_DEVICES +=
> cf-e316n-v2
>
> +define Device/cf-e380ac-v1
> + DEVICE_TITLE := COMFAST CF-E380AC-V1
> + BOARDNAME = CF-E380AC-V1
> + IMAGE_SIZE = 16128k
> + CONSOLE = ttyS0,115200
> + MTDPARTS =
> +spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(nvram)ro
> +endef
> +TARGET_DEVICES += cf-e380ac-v1
> +
> +define Device/cf-e380ac-v2
> + DEVICE_TITLE := COMFAST CF-E380AC-V2
> + BOARDNAME = CF-E380AC-V2
> + IMAGE_SIZE = 16000k
> + CONSOLE = ttyS0,115200
> + MTDPARTS =
> +spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(nvram)ro
> +endef
> +TARGET_DEVICES += cf-e380ac-v2
> +
> define Device/weio
> DEVICE_TITLE := WeIO
> DEVICE_PACKAGES := kmod-usb-core kmod-usb2
> --
> 1.7.9.5
>
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
_______________________________________________
Lede-dev mailing list
Lede-dev at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
More information about the Lede-dev
mailing list