[LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817

[John Crispin]

On 18/10/2016 09:49, André Valentin wrote:
> Hi John,
> 
> thanks for your comments. Please take a look:
> 
> Am 18.10.2016 um 08:22 schrieb John Crispin:
> 
>>> +++ b/target/linux/ipq806x/base-files/lib/preinit/04_set_mtd_ipq806x.sh
>>> @@ -0,0 +1,21 @@
>>> +#
>>> +# Copyright (C) 2009 OpenWrt.org
>>> +#
>>> +
>>> +. /lib/ipq806x.sh
>>> +. /lib/functions/system.sh
>>> +
>>> +preinit_assign_mtd2block() {
>>> +	case $(ipq806x_board_name) in
>>> +		nbg6817)
>>> +			echo "/dev/mmcblk0p2,64KiB,romd" > /sys/module/block2mtd/parameters/block2mtd
>>> +			echo "/dev/mmcblk0p3,64KiB,header" > /sys/module/block2mtd/parameters/block2mtd
>>> +			echo "/dev/mmcblk0p4,64KiB,kernel" > /sys/module/block2mtd/parameters/block2mtd
>>> +			echo "/dev/mmcblk0p6,64KiB,header_1" > /sys/module/block2mtd/parameters/block2mtd
>>> +			echo "/dev/mmcblk0p7,64KiB,kernel_1" > /sys/module/block2mtd/parameters/block2mtd
>>> +			echo "/dev/mmcblk0p8,64KiB,rootfs_1" > /sys/module/block2mtd/parameters/block2mtd
>>> +			;;
>>> +	esac
>>> +}
>>> +
>>
>> can this not go into the commandline inside the devicetree ?
> I tried, but block2mtd accepts only one mapping in the command line.
> 
> I will rework the patch the next days and send an update.
> 
> André
> 

ah ok, let me try and find an old patch i built that adds multi instance
support to block2mtd

	John