[LEDE-DEV] [PATCH v2 1/2] generic: ar8216: improve ar8xxx_is_possible check
Christian Lamparter
chunkeey at googlemail.com
Tue Oct 4 13:55:04 PDT 2016
The commit "generic: ar8216: add sanity check to ar8216_probe"
(774da6c7a40320a320b28d71291c0e61fcf7bc8a) stated that PHY IDs
should be checked at address 0-4. However, the PHY 4 was
never check by the loop. This patch extends the check to be
similar to the Atheors SDK. It tries all 4 ports and skips
unconnected PHYs if necessary. If it cannot find any familiar
PHYs, it will prevent the phy driver from initializing.
This patch is necessary for the C-60. It doesn't have a
PHY at port 3, so this caused the check in ar8xxx_is_possible
to fail. As a result, the ethernet ports on the C-60 didn't
work.
Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
target/linux/generic/files/drivers/net/phy/ar8216.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index 70f4774..3f1e151 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -2113,19 +2113,22 @@ ar8xxx_phy_match(u32 phy_id)
static bool
ar8xxx_is_possible(struct mii_bus *bus)
{
- unsigned i;
+ unsigned int i, found_phys = 0;
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < 5; i++) {
u32 phy_id;
phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16;
phy_id |= mdiobus_read(bus, i, MII_PHYSID2);
- if (!ar8xxx_phy_match(phy_id)) {
+ if (ar8xxx_phy_match(phy_id)) {
+ found_phys++;
+ } else if (phy_id) {
pr_debug("ar8xxx: unknown PHY at %s:%02x id:%08x\n",
dev_name(&bus->dev), i, phy_id);
- return false;
}
}
+ if (found_phys == 0)
+ return false;
return true;
}
--
2.9.3
More information about the Lede-dev
mailing list