[LEDE-DEV] [PATCH v5 1/3] ipq806x: Add new script: scripts/its-maker.sh
J Mo
jmomo at jmomo.net
Sat Nov 26 21:28:33 PST 2016
its-maker.sh creates an .its file, given a series of arguments, which is
then used to create a FIT image with mkimage.
Required to support the tew827dru, but intended to support the creation
of nearly any .its file.
Documentation thread on the OpenWRT forum:
https://forum.openwrt.org/viewtopic.php?pid=337783
Signed-off-by: Jesse Molina <jmomo at jmomo.net>
---
scripts/its-maker.sh | 827 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 827 insertions(+)
create mode 100755 scripts/its-maker.sh
diff --git a/scripts/its-maker.sh b/scripts/its-maker.sh
new file mode 100755
index 0000000..2c036a1
--- /dev/null
+++ b/scripts/its-maker.sh
@@ -0,0 +1,827 @@
+#!/bin/bash
+#
+# Create a u-boot FIT ITS (Image Tree Source) file given a convoluted series of arguments.
+#
+# Combination use of leading tabs and spaces is intentional for here-doc (<<-) and should be preserved.
+#
+# TODO/FIXMEs:
+# Enforcement of mandatory/optional formatting rules.
+# Clean up trap on interrupt.
+# Sanitizing and sanity checking input.
+# "#address-cells : Number of 32bit cells required to represent entry and
+# load addresses supplied within sub-image nodes. May be omitted when no
+# entry or load addresses are used."
+# We should auto-calculate the address-cells and include as/if needed.
+# "At least one sub-image is required."
+#
+
+VERSION=1.2
+MYNAME=$(basename $0)
+declare -a ar_IMG_IDS
+declare -a ar_IMG_NAME
+declare -a ar_IMG_DESCR
+declare -a ar_IMG_FILE
+declare -a ar_IMG_TYPE
+declare -a ar_IMG_ARCH
+declare -a ar_IMG_OS
+declare -a ar_IMG_COMPRESSION
+declare -a ar_IMG_LOAD_ADDR
+declare -a ar_IMG_ENTRY_ADDR
+declare -a ar_IMG_HASHES
+declare -a ar_CFG_IDS
+declare -a ar_CFG_NAME
+declare -a ar_CFG_DESCR
+declare -a ar_CFG_KERNEL
+declare -a ar_CFG_RAMDISK
+declare -a ar_CFG_FDT
+
+# case +([0-9]) regex requires shopt -s extglob.
+shopt -s extglob
+
+echoerr() {
+ # Print errors to stderr.
+ echo "$@" 1>&2;
+ if [[ -n "$SEEN_ERROR" ]] ; then declare -r SEEN_ERROR=1 ; fi # If we saw any errors, set SEEN_ERROR=1, for later use.
+}
+
+echodebug() {
+ # Print debug messages to stderr if debugging enabled.
+ if [[ "$SCRIPT_DEBUG" == 1 ]] ; then
+ echo "DEBUG: $@" 1>&2;
+ fi
+}
+
+f_printusage() {
+ # Print usage info.
+ cat <<-EOF
+ Usage:
+
+ help|--help|-h|-H Show help info.
+ --debug Debug the $MYNAME script.
+
+ --out|-O Output file, otherwise output goes to stdout.
+ --fit-type|-T The FIT format type. Defaults to "flat_dt".
+ --fit-description|-D The FIT Description line.
+ --device|-i Device for which we are building this ITS.
+
+ Image Commands: (all image commands must be followed by an integer ID.)
+
+ --img-name|-n The name of the image.
+ --img-descr|-d The description of the image.
+ --img-file|-f The image data file.
+ --img-type|-t The type/format of the image.
+ --img-arch|-a The arch of the image.
+ --img-os|-o The OS of the image.
+ --img-compression|-c The compression of the image.
+ --img-load-addr|-l The load address for the image.
+ --img-entry-addr|-e The entry address for the image.
+ --img-hashes|-s The image hash(es), comma-seperated.
+
+ Configuration Commands: (all configuration commands must be followed by an integer ID, except the default.)
+
+ --cfg-default|-C The ID of the default configuration.
+ --cfg-name|-m The name of the configuration.
+ --cfg-descr|-p The description of the configuration.
+ --cfg-kernel|-k The kernel image ID to use for the configuration.
+ --cfg-ramdisk|-r The ramdisk image ID to use for the configuration.
+ --cfg-fdt|-x The FDT image ID to use for the configuration.
+
+ Example:
+
+ $MYNAME --device Widget5K --fit-type flat_dt --fit-description "Widget 5000 Extreme Edition Plus" --img-name 0 "upgrade-script" --img-descr 0 "Script to upgrade the firmware." --img-file 0 ~/tmp/myfile.scr --img-type 0 script --img-compression 0 none --img-name 1 "OS" --img-descr 1 "Widget 5000 Xe+ Operating System" --img-file 1 ~/tmp/myfile.bin --img-type 1 firmware --img-compression 1 none --img-arch 1 ARM --img-hashes 1 crc32,sha1
+
+ EOF
+}
+
+f_help () {
+ # Print some helpful information.
+ cat <<- EOF
+
+ $MYNAME constructs a u-boot FIT DTS file for use with mkimage.
+
+ $MYNAME version: $VERSION
+ EOF
+ f_printusage
+ return 0
+}
+
+f_register_img_id () {
+ # Register the IMG_ID in our ar_IMG_IDS array if needed.
+ if ! [[ "${ar_IMG_IDS[$1]}" ]] ; then
+ ar_IMG_IDS[$IMG_ID]=$IMG_ID
+ echodebug "IMG_ID $IMG_ID added to ar_IMG_IDS"
+ fi
+}
+
+f_register_cfg_id () {
+ # Register the CFG_ID in our ar_CFG_IDS array if needed.
+ # if ! [[ "${ar_CFG_IDS[$1]}" ]] ; then
+ if ! [[ "${ar_CFG_IDS[$1]}" ]] ; then
+ ar_CFG_IDS[$CFG_ID]=$CFG_ID
+ echodebug "CFG_ID $CFG_ID added to ar_CFG_IDS"
+ fi
+}
+
+f_assemble_dts_header () {
+ cat <<-EOF >> $DTS_BODY
+ /dts-v1/;
+ / {
+ description = "${HEADER_DESCR}";
+ #address-cells = <1>;
+ EOF
+}
+
+f_assemble_img_header () {
+ cat <<-EOF >> $DTS_BODY
+ images {
+ EOF
+}
+
+f_assemble_img_body_header () {
+ cat <<-EOF >> $DTS_BODY
+ ${ar_IMG_NAME[$IMG_ID]}@${IMG_ID} {
+ data = /incbin/("${ar_IMG_FILE[$IMG_ID]}");
+ description = "${ar_IMG_DESCR[$IMG_ID]}";
+ type = "${ar_IMG_TYPE[$IMG_ID]}";
+ compression = "${ar_IMG_COMPRESSION[$IMG_ID]}";
+ EOF
+}
+
+f_assemble_img_body_arch () {
+ cat <<-EOF >> $DTS_BODY
+ arch = "${ar_IMG_ARCH[$IMG_ID]}";
+ EOF
+}
+
+f_assemble_img_body_os () {
+ cat <<-EOF >> $DTS_BODY
+ os = "${ar_IMG_OS[$IMG_ID]}";
+ EOF
+}
+
+f_assemble_img_body_load-entry () {
+ cat <<-EOF >> $DTS_BODY
+ load = <${ar_IMG_LOAD_ADDR[$IMG_ID]}>;
+ entry = <${ar_IMG_ENTRY_ADDR[$IMG_ID]}>;
+ EOF
+}
+
+f_assemble_img_body_hash () {
+ cat <<-EOF >> $DTS_BODY
+ hash@${HASH_NUM} {
+ algo = "${HASH_NAME}";
+ };
+ EOF
+}
+
+f_assemble_img_body_footer () {
+ cat <<-EOF >> $DTS_BODY
+ };
+ EOF
+}
+
+f_assemble_img_footer () {
+ cat <<-EOF >> $DTS_BODY
+ };
+ EOF
+}
+
+f_assemble_cfg_header () {
+ cat <<-EOF >> $DTS_BODY
+ configurations {
+ EOF
+}
+
+f_assemble_cfg_header_default () {
+ cat <<-EOF >> $DTS_BODY
+ default = "${ar_CFG_NAME[$CFG_DEFAULT]}@${CFG_DEFAULT}";
+ EOF
+}
+
+f_assemble_cfg_body_header () {
+ cat <<-EOF >> $DTS_BODY
+ ${ar_CFG_NAME[$CFG_ID]}@${CFG_ID} {
+ description = "${ar_CFG_DESCR[$CFG_ID]}";
+ kernel = "${ar_CFG_KERNEL[$CFG_ID]}";
+ EOF
+}
+
+f_assemble_cfg_body_ramdisk () {
+ cat <<-EOF >> $DTS_BODY
+ ramdisk = "${ar_CFG_RAMDISK[$CFG_ID]}";
+ EOF
+}
+
+f_assemble_cfg_body_FDT () {
+ cat <<-EOF >> $DTS_BODY
+ fdt = "${ar_CFG_FDT[$CFG_ID]}";
+ EOF
+}
+
+f_assemble_cfg_body_footer () {
+ cat <<-EOF >> $DTS_BODY
+ };
+ EOF
+}
+
+f_assemble_cfg_footer () {
+ cat <<-EOF >> $DTS_BODY
+ };
+ EOF
+}
+
+f_assemble_dts_footer () {
+ cat <<-EOF >> $DTS_BODY
+ };
+ EOF
+}
+
+f_validate_in_args3 () {
+ # Validate $3 input argument.
+ if [[ -z "$ARG3" ]] ; then
+ echoerr -e "\nERROR: $ARG1 $IMG_ID argument missing.\n"
+ exit 1
+ fi
+ if ( echo "$ARG3" | egrep "^--" &> /dev/null ) ; then
+ # Look out for accidental missing values. However, this does incorrectly prohibit unusual valid data.
+ echoerr -e "\nERROR: Suspected missing value for $ARG1 $IMG_ID.\n"
+ exit 1
+ fi
+}
+
+# --
+
+# No input? Print usage and exit 1.
+[[ "$#" -eq 0 ]] && { f_printusage ; exit 1 ; }
+
+while [[ "$#" -gt 0 ]] ; do case "$1" in
+ --debug)
+ SCRIPT_DEBUG=1
+ # set -o functrace
+ # set -x
+ shift 1
+ ;;
+ help|--help|-h|-H)
+ f_help
+ exit $?
+ ;;
+ --out|-O)
+ OUT_FILE=$2
+ echodebug "Outfile set to $2"
+ shift 2
+ ;;
+ --device|-i)
+ DEVICE=$2
+ echodebug "Device set to $2"
+ shift 2
+ ;;
+ --fit-type|-T)
+ if [[ -z "$FIT_TYPE" ]] ; then
+ FIT_TYPE=$2
+ echodebug "FIT type set to $2"
+ shift 2
+ else
+ echoerr -e "\nERROR: --fit-fype was set more than once.\n"
+ exit 1
+ fi
+ ;;
+ --fit-description|-D)
+ if [[ -z "$HEADER_DESCR" ]] ; then
+ HEADER_DESCR=$2
+ echodebug "FIT description set to \"$2\""
+ shift 2
+ else
+ echoerr -e "\nERROR: --fit-description was set more than once.\n"
+ exit 1
+ fi
+ ;;
+ --img-name|-n)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_NAME[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_NAME[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-name $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-name ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-descr|-d)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_DESCR[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_DESCR[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-descr $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-descr ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-file|-f)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_FILE[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_FILE[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-file $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-file ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-type|-t)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_TYPE[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_TYPE[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-type $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-type ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-arch|-a)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_ARCH[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_ARCH[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-arch $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-arch ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-os|-o)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_OS[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_OS[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-os $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-os ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-compression|-c)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_COMPRESSION[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_COMPRESSION[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-compression $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-compression ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-load-addr|-l)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_LOAD_ADDR[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_LOAD_ADDR[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-load-addr $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-load-addr ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-entry-addr|-e)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_ENTRY_ADDR[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_ENTRY_ADDR[$IMG_ID]=$3
+ echodebug "$1 $IMG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-entry-addr $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-entry-addr ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --img-hashes|-s)
+ case "$2" in
+ +([0-9]))
+ IMG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_IMG_HASHES[$IMG_ID]}" ]] ; then
+ f_register_img_id $IMG_ID
+ ar_IMG_HASHES[$IMG_ID]=$3
+ echodebug "$1 ${IMG_ID} set to \"$3\""
+ else
+ echoerr -e "\nERROR: --img-hashes $IMG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset IMG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --img-hashes ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --cfg-default|-C)
+ if [[ -z "$CFG_DEFAULT" ]] ; then
+ CFG_DEFAULT=$2
+ echodebug "FIT configuration default set to \"$2\""
+ shift 2
+ else
+ echoerr -e "\nERROR: --cfg-default was set more than once.\n"
+ exit 1
+ fi
+ ;;
+ --cfg-name|-m)
+ case "$2" in
+ +([0-9]))
+ CFG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_CFG_NAME[$CFG_ID]}" ]] ; then
+ f_register_cfg_id $CFG_ID
+ ar_CFG_NAME[$CFG_ID]=$3
+ echodebug "$1 $CFG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --cfg-name $CFG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset CFG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --cfg-name ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --cfg-descr|-p)
+ case "$2" in
+ +([0-9]))
+ CFG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_CFG_DESCR[$CFG_ID]}" ]] ; then
+ f_register_cfg_id $CFG_ID
+ ar_CFG_DESCR[$CFG_ID]=$3
+ echodebug "$1 $CFG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --cfg-descr $CFG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset CFG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --cfg-descr ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --cfg-kernel|-k)
+ case "$2" in
+ +([0-9]))
+ CFG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_CFG_KERNEL[$CFG_ID]}" ]] ; then
+ f_register_cfg_id $CFG_ID
+ ar_CFG_KERNEL[$CFG_ID]=$3
+ echodebug "$1 $CFG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --cfg-kernel $CFG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset CFG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --cfg-kernel ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --cfg-ramdisk|-r)
+ case "$2" in
+ +([0-9]))
+ CFG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_CFG_RAMDISK[$CFG_ID]}" ]] ; then
+ f_register_cfg_id $CFG_ID
+ ar_CFG_RAMDISK[$CFG_ID]=$3
+ echodebug "$1 $CFG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --cfg-ramdisk $CFG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset CFG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --cfg-ramdisk ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ --cfg-fdt|-x)
+ case "$2" in
+ +([0-9]))
+ CFG_ID=$2 ARG1=$1 ARG2=$2 ARG3=$3
+ f_validate_in_args3
+ if [[ -z "${ar_CFG_FDT[$CFG_ID]}" ]] ; then
+ f_register_cfg_id $CFG_ID
+ ar_CFG_FDT[$CFG_ID]=$3
+ echodebug "$1 $CFG_ID set to \"$3\""
+ else
+ echoerr -e "\nERROR: --cfg-fdt $CFG_ID was set more than once.\n"
+ exit 1
+ fi
+ shift 3 ; unset CFG_ID ARG1 ARG2 ARG3
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid --cfg-fdt ID. Must be an integer.\n"
+ exit 1
+ ;;
+ esac
+ ;;
+ *)
+ echoerr -e "\nERROR: Invalid argument \"$1\".\n"
+ f_printusage
+ exit 1
+ ;;
+esac ; done
+
+# Build the ITS.
+#
+# NOTE: The ITS format and it's rules are complicated and we don't guarantee the production of a valid file.
+# We will do some basic validity checking, but producing an invalid ITS is a valid scenario.
+# It is mkimage's job to determine if the content of a ITS is valid or not.
+
+DTS_BODY=$(mktemp)
+
+# Assemble the header.
+#
+
+# If we didn't get a FIT/header description, make one up by default.
+if [[ -z "$HEADER_DESCR" ]] ; then
+ if [[ -z "$DEVICE" ]] ; then
+ HEADER_DESCR="$MYNAME FIT image"
+ else # use $DEVICE if we have it.
+ HEADER_DESCR="$MYNAME FIT image for ${DEVICE}"
+ fi
+fi
+
+f_assemble_dts_header
+
+# At least one image entry is required by the ITS format.
+if [[ -z "${ar_IMG_IDS[@]}" ]] ; then
+ echoerr -e "\nERROR: At least one valid image is required.\n"
+ exit 1
+fi
+
+f_assemble_img_header
+
+# If an image name wasn't supplied, we will make one up.
+# We could do this later, but let's be consistent with the way the Configurations are named.
+for IMGBLOCK in ${ar_IMG_IDS[@]} ; do
+ IMG_ID=$IMGBLOCK
+ if [[ -z "${ar_IMG_NAME[$IMG_ID]}" ]] ; then
+ ar_IMG_NAME[$IMG_ID]=img${IMG_ID}
+ echodebug "IMG_ID $IMG_ID setting name to \"${ar_IMG_NAME[$IMG_ID]}\"."
+ fi
+done ; unset IMGBLOCK IMG_ID
+
+# Assemble an Image block for each.
+
+for IMGBLOCK in ${ar_IMG_IDS[@]} ; do
+ IMG_ID=$IMGBLOCK
+ echodebug "Processing IMG_ID $IMG_ID"
+ # The following fields are required for all images: description, type, data, compression.
+ for EACH in "${ar_IMG_DESCR[$IMG_ID]}" "${ar_IMG_TYPE[$IMG_ID]}" "${ar_IMG_FILE[$IMG_ID]}" "${ar_IMG_COMPRESSION[$IMG_ID]}" ; do
+ if [[ -z "$EACH" ]] ; then
+ MISSING_IMG_REQUIRED=1
+ fi
+ done ; unset EACH
+ [[ "$MISSING_IMG_REQUIRED" == 1 ]] && {
+ echoerr -e "\nERROR: Missing one or more required attributes for IMG_ID $IMG_ID.\n"
+ exit 1 ; }
+ f_assemble_img_body_header
+ case "${ar_IMG_TYPE[$IMG_ID]}" in # ARCH is conditionally mandatory for certain image types.
+ standalone|kernel|firmware|ramdisk|fdt)
+ if [[ -z "${ar_IMG_ARCH[$IMG_ID]}" ]] ; then
+ echoerr -e "\nERROR: --img-arch required for this image type.\n"
+ exit 1
+ fi
+ ;;
+ esac
+ if [[ -n "${ar_IMG_ARCH[$IMG_ID]}" ]] ; then # Add architecture.
+ f_assemble_img_body_arch
+ fi
+ case "${ar_IMG_TYPE[$IMG_ID]}" in # OS is conditionally mandatory for kernels.
+ kernel)
+ if [[ -z "${ar_IMG_OS[$IMG_ID]}" ]] ; then
+ echoerr -e "\nERROR: --img-os required for this image type.\n"
+ exit 1
+ fi
+ ;;
+ esac
+ if [[ -n "${ar_IMG_OS[$IMG_ID]}" ]] ; then # Add OS.
+ f_assemble_img_body_os
+ fi
+ case "${ar_IMG_TYPE[$IMG_ID]}" in # LOAD/ENTRY is conditionally mandatory for standalone kernels.
+ standalone|kernel)
+ if [[ -z "${ar_IMG_LOAD_ADDR[$IMG_ID]}" ]] || [[ -z "${ar_IMG_ENTRY_ADDR[$IMG_ID]}" ]]; then
+ echoerr -e "\nERROR: --img-load-addr and --img-entry-addr are required for this image type.\n"
+ exit 1
+ fi
+ ;;
+ esac
+ if [[ -n "${ar_IMG_LOAD_ADDR[$IMG_ID]}" ]] && [[ -n "${ar_IMG_ENTRY_ADDR[$IMG_ID]}" ]]; then # Load and entry required together.
+ f_assemble_img_body_load-entry
+ elif [[ -n "${ar_IMG_LOAD_ADDR[$IMG_ID]}" ]] && [[ -z "${ar_IMG_ENTRY_ADDR[$IMG_ID]}" ]]; then # One without the other is an error.
+ echoerr -e "\nERROR: An image entry address is required if a load address is specified for IMG_ID $IMG_ID.\n"
+ exit 1
+ elif [[ -z "${ar_IMG_LOAD_ADDR[$IMG_ID]}" ]] && [[ -n "${ar_IMG_ENTRY_ADDR[$IMG_ID]}" ]]; then # One without the other is an error.
+ echoerr -e "\nERROR: An image load address is required if an entry address is specified for IMG_ID $IMG_ID.\n"
+ exit 1
+ fi
+ if [[ -n "${ar_IMG_HASHES[$IMG_ID]}" ]] ; then # Hashes are optional.
+ echodebug "IMG_ID $IMG_ID has hashes"
+ HASH_NUM=0
+ while IFS=',' ; do
+ for EACH in ${ar_IMG_HASHES[$IMG_ID]} ; do
+ echodebug "Processing IMG_ID $IMG_ID HASH_ID $EACH"
+ HASH_NAME=$EACH
+ f_assemble_img_body_hash
+ HASH_NUM=$(( HASH_NUM + 1 ))
+ done ; unset EACH
+ break
+ done ; unset HASH_NUM HASH_NAME
+ fi
+ f_assemble_img_body_footer
+done ; unset IMGBLOCK IMG_ID
+
+f_assemble_img_footer
+
+# Configurations are optional.
+if [[ "${#ar_CFG_IDS[@]}" -gt 0 ]] ; then
+ f_assemble_cfg_header
+
+ # If a configuration name wasn't supplied, we will make one up.
+ # Because the default configuration might not have a name yet, we do this before f_assemble_cfg_header_default.
+ for CFGBLOCK in ${ar_CFG_IDS[@]} ; do
+ CFG_ID=$CFGBLOCK
+ if [[ -z "${ar_CFG_NAME[$CFG_ID]}" ]] ; then
+ ar_CFG_NAME[$CFG_ID]=config${CFG_ID}
+ echodebug "CFG_ID $CFG_ID setting name to \"${ar_CFG_NAME[$CFG_ID]}\"."
+ fi
+ done ; unset CFGBLOCK CFG_ID
+
+ # If we defined a default configuration, then use it.
+ if [[ -n "$CFG_DEFAULT" ]] ; then
+ if [[ ! "${ar_CFG_IDS[$CFG_DEFAULT]}" ]] ; then # If we have a default, the associated cfg ID must exist.
+ echoerr -e "\nERROR: A default configuration is defined, but CFG_ID \"$CFG_DEFAULT\" does not exist.\n"
+ exit 1
+ fi
+ f_assemble_cfg_header_default
+ fi
+
+ # Assemble a configuration block for each.
+ for CFGBLOCK in ${ar_CFG_IDS[@]} ; do
+ CFG_ID=$CFGBLOCK
+ echodebug "Processing CFG_ID $CFG_ID"
+ # The following fields are required for all configurations: description, kernel.
+ for EACH in "${ar_CFG_DESCR[$CFG_ID]}" "${ar_CFG_KERNEL[$CFG_ID]}" ; do
+ if [[ -z "$EACH" ]] ; then
+ MISSING_CFG_REQUIRED=1
+ fi
+ done ; unset EACH
+ [[ "$MISSING_CFG_REQUIRED" == 1 ]] && {
+ echoerr -e "\nERROR: Missing one or more required attributes for CFG_ID $CFG_ID.\n"
+ exit 1 ; }
+ f_assemble_cfg_body_header
+ if [[ -n "${ar_CFG_KERNEL[$CFG_ID]}" ]] ; then # A defined kernel must match up to an image of type "kernel".
+ if ! [[ "${ar_IMG_TYPE[${ar_CFG_KERNEL[$CFG_ID]}]}" == kernel ]] ; then
+ echoerr -e "\nERROR: Configuration kernel ID \"${CFG_ID}\" image does not exist, or is not of \"kernel\" type.\n"
+ exit 1
+ fi
+ fi
+ if [[ -n "${ar_CFG_RAMDISK[$CFG_ID]}" ]] ; then # Add ramdisk.
+ if ! [[ "${ar_IMG_TYPE[${ar_CFG_RAMDISK[$CFG_ID]}]}" == ramdisk ]] ; then
+ echoerr -e "\nERROR: Configuration ramdisk ID \"${CFG_ID}\" image does not exist, or is not of \"ramdisk\" type.\n"
+ exit 1
+ fi
+ f_assemble_cfg_body_ramdisk
+ fi
+ if [[ -n "${ar_CFG_FDT[$CFG_ID]}" ]] ; then # Add FDT.
+ if ! [[ "${ar_IMG_TYPE[${ar_CFG_FDT[$CFG_ID]}]}" == fdt ]] ; then
+ echoerr -e "\nERROR: Configuration FDT ID \"${CFG_ID}\" image does not exist, or is not of \"fdt\" type.\n"
+ exit 1
+ fi
+ f_assemble_cfg_body_FDT
+ fi
+ f_assemble_cfg_body_footer
+ done ; unset CFGBLOCK CFG_ID
+
+ f_assemble_cfg_footer
+fi
+
+# Assemble DTS the footer.
+f_assemble_dts_footer
+
+# If we don't have an output file, print to stdout.
+if [[ -z "$OUT_FILE" ]] ; then
+ echodebug "Printing DTS to stdout"
+ cat "$DTS_BODY" && rm -f "$DTS_BODY"
+else
+ # Make sure we are not going to clobber a file.
+ if [[ -f "$OUT_FILE" ]] ; then
+ echoerr -e "\nERROR: Output file \"OUT_FILE\" already exists!\n"
+ exit 1
+ fi
+ echodebug "Writing output file."
+ cat "$DTS_BODY" > $OUT_FILE ; X_WRITE_OUT=$?
+ if [[ "$X_WRITE_OUT" == 0 ]] ; then
+ echo -e "\nDTS file written to: $OUT_FILE\n"
+ rm -f "$DTS_BODY"
+ else
+ echoerr -e "\nERROR: Writing output file failed.\n"
+ exit 1
+ fi
+fi
--
2.1.4
More information about the Lede-dev
mailing list