[LEDE-DEV] [PATCH] mt7621: add support for WeVO W2914NS v2

[perillamint]

From: "Yong-hyu, Ban" <perillamint at gentoo.moe>

Signed-off-by: Yong-hyu, Ban <perillamint at gentoo.moe>
---
 .../linux/ramips/base-files/etc/board.d/02_network |   1 +
 target/linux/ramips/base-files/lib/ramips.sh       |   3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/W2914NSV2.dts              | 126 +++++++++++++++++++++
 target/linux/ramips/image/mt7621.mk                |   8 ++
 5 files changed, 139 insertions(+)
 create mode 100644 target/linux/ramips/dts/W2914NSV2.dts

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index e2a2f94..52289a4 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -86,6 +86,7 @@ ramips_setup_interfaces()
 	sap-g3200u3|\
 	sk-wb8|\
 	vr500|\
+	w2914nsv2|\
 	wf-2881|\
 	witi|\
 	wl-wn575a3|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 2560eb7..dbfb650 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -583,6 +583,9 @@ ramips_board_detect() {
 	*"YK1")
 		name="youku-yk1"
 		;;
+	*"W2914NS v2")
+		name="w2914nsv2"
+		;;
 	*)
 		name="generic"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 7f161f5..169e0ff 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -131,6 +131,7 @@ platform_check_image() {
 	vocore|\
 	vr500|\
 	w150m|\
+	w2914nsv2|\
 	w306r-v20|\
 	w502u|\
 	wf-2881|\
diff --git a/target/linux/ramips/dts/W2914NSV2.dts b/target/linux/ramips/dts/W2914NSV2.dts
new file mode 100644
index 0000000..fd50e4e
--- /dev/null
+++ b/target/linux/ramips/dts/W2914NSV2.dts
@@ -0,0 +1,126 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "WeVO W2914NS v2";
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 29 1>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 18 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "w2914nsv2:green:usb";
+			gpios = <&gpio0 27 1>;
+		};
+	};
+};
+
+
+&sdhci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l12805d";
+		reg = <0>;
+		linux,modalias = "m25p80", "w25q128";
+		spi-max-frequency = <10000000>;
+
+		partition at 0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition at 30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition at 40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+		};
+
+		partition at 50000 {
+			label = "firmware";
+			reg = <0x50000 0xfb0000>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	pcie0 {
+		mt76x2e at 0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&factory 0x0000>;
+			mediatek,5ghz = <0>;
+		};
+	};
+
+	pcie1 {
+		mt7603e at 1,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&factory 0x8000>;
+			mediatek,2ghz = <0>;
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "wdt", "rgmii2", "jtag", "mdio";
+			ralink,function = "gpio";
+		};
+	};
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 116d092..b61f4a2 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -199,6 +199,14 @@ define Device/rb750gr3
 endef
 TARGET_DEVICES += rb750gr3
 
+define Device/w2914nsv2
+  DTS := W2914NSV2
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+  DEVICE_TITLE := WeVO W2914NS v2
+  DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-i2c-mt7621 kmod-mt76
+endef
+TARGET_DEVICES += w2914nsv2
+
 # FIXME: is this still needed?
 define Image/Prepare
 #define Build/Compile
-- 
2.10.2