[LEDE-DEV] brcm47xx legacy broken in trunk?

[p.wassi at gmx.at]

Ok, I did some further tests.

First test was with ASUS WL500gpv2: this runs fine on brcm47xx-legacy from trunk.

The second test was with an *unmodified* WRT54GL (having only 16MB of RAM)
(It's clear, that 16MB is not enough to run trunk, however, it should
at least start booting the kernel.)
Result: same as with 32MB RAM: stuck at "Starting program at 0x80001000"

To sum up: it's not brcm47xx legacy which is broken, but
WRT54G's images seem to be unable to boot.

Best regards,
P.Wassi