[LEDE-DEV] [PATCH v3 00/10] Add support for TP-Link Archer C2600 v1.0 and v1.1

[Ash Benz]

Apologies for the bombardment. For some reason the first three in my previous submission don't seem to have gone through.

New set with minor changes for kernel 4.4. Requires QCA's recently submitted ipq806x 4.4 patch.
Generated against blogic's staging tree.

Ash Benz (10):
  include/image.mk: move build step tplink-safeloader to image.mk
  fw-utils/tplink-safeloader.c: Add support for Archer C2600
  ipq806x: Add Archer C2600 to image/Makefile
  ipq806x/base-files: Add Archer C2600 LEDs and board
  ipq806x/base-files: Add support for Archer C2600
  ipq806x/base-files: extract ath10k caldata
  ipq806x/profiles: Add Archer C2600
  ipq806x/dts: Add Archer C2600 DTS
  kernel/mac80211: skip ath10k OTP check if caldata found
  kernel/mtd: Add support for Macronix mx25u25635f, used in C2600 v1.1

 include/image.mk                                   |  12 +
 .../patches/936-ath10k_skip_otp_check.patch        |  42 +++
 target/linux/ar71xx/image/tp-link.mk               |  12 -
 .../475-mtd-spi-nor-add-macronix-mx25u25635f.patch |  10 +
 .../linux/ipq806x/base-files/etc/board.d/01_leds   |   7 +
 .../ipq806x/base-files/etc/board.d/02_network      |   1 +
 .../etc/hotplug.d/firmware/11-ath10k-caldata       |  68 ++++
 target/linux/ipq806x/base-files/lib/ipq806x.sh     |   3 +
 .../ipq806x/base-files/lib/upgrade/platform.sh     |  20 +-
 target/linux/ipq806x/dts/qcom-ipq8064-c2600.dts    | 412 +++++++++++++++++++++
 target/linux/ipq806x/image/Makefile                |  29 +-
 target/linux/ipq806x/profiles/tplink.mk            |  20 +
 tools/firmware-utils/src/tplink-safeloader.c       | 114 +++++-
 13 files changed, 733 insertions(+), 17 deletions(-)
 create mode 100644 package/kernel/mac80211/patches/936-ath10k_skip_otp_check.patch
 create mode 100644 target/linux/generic/patches-4.4/475-mtd-spi-nor-add-macronix-mx25u25635f.patch
 create mode 100644 target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
 create mode 100644 target/linux/ipq806x/dts/qcom-ipq8064-c2600.dts
 create mode 100644 target/linux/ipq806x/profiles/tplink.mk

-- 
2.1.4