[LEDE-DEV] [RFC 1/2] Add some common packages for x86-64 target.

[greearb at candelatech.com]

From: Ben Greear <greearb at candelatech.com>

This should make x86-64 targets more useable out of the box.
The assumption is that most x86-64 users have adequate storage,
and those that do not can still config away the options they
do not need.

Signed-off-by: Ben Greear <greearb at candelatech.com>
---
 target/linux/x86/64/target.mk | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/target/linux/x86/64/target.mk b/target/linux/x86/64/target.mk
index 6497698..e54885f 100644
--- a/target/linux/x86/64/target.mk
+++ b/target/linux/x86/64/target.mk
@@ -1,6 +1,13 @@
 ARCH:=x86_64
 BOARDNAME:=x86_64
-DEFAULT_PACKAGES += kmod-button-hotplug kmod-e1000e kmod-e1000 kmod-r8169
+DEFAULT_PACKAGES += kmod-button-hotplug kmod-e1000e kmod-e1000 kmod-r8169 kmod-igb kmod-8139cp kmod-8139too
+# Add some drivers for common wifi NICs
+DEFAULT_PACKAGES += kmod-ath9k kmod-ath10k kmod-ath9k-htc kmod-ath5k
+# Add some firmware
+DEFAULT_PACKAGES += ath10k-firmware-qca988x ath10k-firmware-qca99x0 ath9k-htc-firmware ath10k-firmware-qca6174
+# Useful general OS packages
+DEFAULT_PACKAGES += bzip2 curl dmesg ethtool getopt hostapd ip-full iperf3 iputils-ping iputils-tracepath iw
+DEFAULT_PACKAGES += nstat relayd tcpdump wpa-cli wpa-supplicant wpa-supplicant-mesh
 
 define Target/Description
         Build images for 64 bit systems including virtualized guests.
-- 
2.4.3