[LEDE-DEV] [PATCH 9/9] uboot-lantiq: Add Arcadyan VGV7519 support

Mathias Kresin dev at kresin.me
Thu May 26 14:08:27 PDT 2016


Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Major cleanup and addition of brnboot second stage u-boot was done by
me.

The second stage brnboot u-boot is untested, since the brnboot prompt
is secured by a still unknown password. But should work.

The former ram values are replaced with the ram values extracted from
the original brnboot. The old ones didn't worked with the ramboot
image.

Signed-off-by: Mathias Kresin <dev at kresin.me>
---
 package/boot/uboot-lantiq/Makefile                 |  22 +-
 ...PS-add-board-support-for-Arcadyan-VGV7519.patch | 288 +++++++++++++++++++++
 2 files changed, 309 insertions(+), 1 deletion(-)
 create mode 100644 package/boot/uboot-lantiq/patches/0114-MIPS-add-board-support-for-Arcadyan-VGV7519.patch

diff --git a/package/boot/uboot-lantiq/Makefile b/package/boot/uboot-lantiq/Makefile
index 5b61f14..1f66d6e 100644
--- a/package/boot/uboot-lantiq/Makefile
+++ b/package/boot/uboot-lantiq/Makefile
@@ -295,6 +295,25 @@ define uboot/vgv7510kw22_ram
   DEPS:=@TARGET_lantiq_xrx200_VGV7510KW22NOR||@TARGET_lantiq_xrx200_VGV7510KW22BRN
 endef
 
+define uboot/vgv7519_brn
+  TITLE:=U-Boot for Arcadyan VGV7519 (BRN)
+  SOC:=vr9
+  DEPS:=@TARGET_lantiq_xrx200_VGV7519NOR||@TARGET_lantiq_xrx200_VGV7519BRN
+endef
+
+define uboot/vgv7519_nor
+  TITLE:=U-Boot for Arcadyan VGV7519 (NOR)
+  SOC:=vr9
+  DEPS:=@TARGET_lantiq_xrx200_VGV7519NOR||@TARGET_lantiq_xrx200_VGV7519BRN
+endef
+
+define uboot/vgv7519_ram
+  TITLE:=U-Boot for Arcadyan VGV7519 (RAM)
+  SOC:=vr9
+  DDR_SETTINGS:=board/arcadyan/vgv7519/ddr_settings.h
+  DEPS:=@TARGET_lantiq_xrx200_VGV7519NOR||@TARGET_lantiq_xrx200_VGV7519BRN
+endef
+
 UBOOTS:= \
 	arv4519pw_ram arv4519pw_nor arv4519pw_brn \
 	arv7510pw_ram arv7510pw_nor arv7510pw_brn \
@@ -309,7 +328,8 @@ UBOOTS:= \
 	easy80920_ram easy80920_nor easy80920_norspl easy80920_sfspl \
 	fb3370_eva fb3370_ram fb3370_sfspl \
 	p2812hnufx_ram p2812hnufx_nandspl \
-	vgv7510kw22_brn vgv7510kw22_nor vgv7510kw22_ram
+	vgv7510kw22_brn vgv7510kw22_nor vgv7510kw22_ram \
+	vgv7519_brn vgv7519_nor vgv7519_ram
 
 define Package/uboot/template
 define Package/uboot-lantiq-$(1)
diff --git a/package/boot/uboot-lantiq/patches/0114-MIPS-add-board-support-for-Arcadyan-VGV7519.patch b/package/boot/uboot-lantiq/patches/0114-MIPS-add-board-support-for-Arcadyan-VGV7519.patch
new file mode 100644
index 0000000..952bdce
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0114-MIPS-add-board-support-for-Arcadyan-VGV7519.patch
@@ -0,0 +1,288 @@
+--- /dev/null
++++ b/board/arcadyan/vgv7519/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= $(obj)lib$(BOARD).o
++
++COBJS	= $(BOARD).o
++
++SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS	:= $(addprefix $(obj),$(COBJS))
++SOBJS	:= $(addprefix $(obj),$(SOBJS))
++
++$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
++	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/vgv7519/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/vgv7519/ddr_settings.h
+@@ -0,0 +1,70 @@
++/*
++ * Copyright (C) 2016 Mathias Kresin <dev at kresin.me>
++ *
++ * The values have been extracted from original brnboot.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#define	MC_CCR00_VALUE	0x101
++#define	MC_CCR01_VALUE	0x1000100
++#define	MC_CCR02_VALUE	0x1010000
++#define	MC_CCR03_VALUE	0x100
++#define	MC_CCR04_VALUE	0x1000000
++#define	MC_CCR05_VALUE	0x1000101
++#define	MC_CCR06_VALUE	0x1000100
++#define	MC_CCR07_VALUE	0x1010000
++#define	MC_CCR08_VALUE	0x1000101
++#define	MC_CCR09_VALUE	0x0
++#define	MC_CCR10_VALUE	0x2000100
++#define	MC_CCR11_VALUE	0x2000401
++#define	MC_CCR12_VALUE	0x30000
++#define	MC_CCR13_VALUE	0x202
++#define	MC_CCR14_VALUE	0x7080A0F
++#define	MC_CCR15_VALUE	0x2040F
++#define	MC_CCR16_VALUE	0x40000
++#define	MC_CCR17_VALUE	0x70102
++#define	MC_CCR18_VALUE	0x4020002
++#define	MC_CCR19_VALUE	0x30302
++#define	MC_CCR20_VALUE	0x8000700
++#define	MC_CCR21_VALUE	0x40F020A
++#define	MC_CCR22_VALUE	0x0
++#define	MC_CCR23_VALUE	0xC020000
++#define	MC_CCR24_VALUE	0x4401B04
++#define	MC_CCR25_VALUE	0x0
++#define	MC_CCR26_VALUE	0x0
++#define	MC_CCR27_VALUE	0x6420000
++#define	MC_CCR28_VALUE	0x0
++#define	MC_CCR29_VALUE	0x0
++#define	MC_CCR30_VALUE	0x798
++#define	MC_CCR31_VALUE	0x2040F
++#define	MC_CCR32_VALUE	0x0
++#define	MC_CCR33_VALUE	0x650000
++#define	MC_CCR34_VALUE	0x200C8
++#define	MC_CCR35_VALUE	0x1D445D
++#define	MC_CCR36_VALUE	0xC8
++#define	MC_CCR37_VALUE	0xC351
++#define	MC_CCR38_VALUE	0x0
++#define	MC_CCR39_VALUE	0x141F04
++#define	MC_CCR40_VALUE	0x142704
++#define	MC_CCR41_VALUE	0x141B42
++#define	MC_CCR42_VALUE	0x141B42
++#define	MC_CCR43_VALUE	0x566504
++#define	MC_CCR44_VALUE	0x566504
++#define	MC_CCR45_VALUE	0x565F17
++#define	MC_CCR46_VALUE	0x565F17
++#define	MC_CCR47_VALUE	0x2040F
++#define	MC_CCR48_VALUE	0x0
++#define	MC_CCR49_VALUE	0x0
++#define	MC_CCR50_VALUE	0x0
++#define	MC_CCR51_VALUE	0x0
++#define	MC_CCR52_VALUE	0x133
++#define	MC_CCR53_VALUE	0xF3014B27
++#define	MC_CCR54_VALUE	0xF3014B27
++#define	MC_CCR55_VALUE	0xF3014B27
++#define	MC_CCR56_VALUE	0xF3014B27
++#define	MC_CCR57_VALUE	0x7800301
++#define	MC_CCR58_VALUE	0x7800301
++#define	MC_CCR59_VALUE	0x7800301
++#define	MC_CCR60_VALUE	0x7800301
++#define	MC_CCR61_VALUE	0x4
+--- /dev/null
++++ b/board/arcadyan/vgv7519/vgv7519.c
+@@ -0,0 +1,95 @@
++/*
++ * This file is released under the terms of GPL v2 and any later version.
++ * See the file COPYING in the root directory of the source tree for details.
++ *
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++ */
++
++#include <common.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init	1
++#define do_pll_init	0
++#define do_dcdc_init	1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define do_gpio_init	1
++#define do_pll_init	1
++#define do_dcdc_init	1
++#else
++#define do_gpio_init	0
++#define do_pll_init	0
++#define do_dcdc_init	1
++#endif
++
++#define GPIO_GPHY_RESET	47
++
++static void gpio_init(void)
++{
++	/* Disable reset on external eth PHY */
++	gpio_direction_output(GPIO_GPHY_RESET, 1);
++}
++
++int board_early_init_f(void)
++{
++	if (do_gpio_init)
++		gpio_init();
++
++	if (do_pll_init)
++		ltq_pll_init();
++
++	if (do_dcdc_init)
++		ltq_dcdc_init(0x7F);
++
++	return 0;
++}
++
++int checkboard(void)
++{
++	puts("Board: " CONFIG_BOARD_NAME "\n");
++	ltq_chip_print_info();
++
++	return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++	/* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
++	{ 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++	/* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
++	{ 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++	/* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
++	{ 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++	/* GMAC3: unused */
++	{ 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++	/* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
++	{ 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++	/* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
++	{ 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++	.ports = eth_port_config,
++	.num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++	const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++	const ulong fw_addr = 0x80FF0000;
++
++	if (ltq_chip_version_get() == 1)
++		ltq_gphy_phy22f_a1x_load(fw_addr);
++	else
++		ltq_gphy_phy22f_a2x_load(fw_addr);
++
++	ltq_cgu_gphy_clk_src(clk);
++
++	ltq_rcu_gphy_boot(0, fw_addr);
++	ltq_rcu_gphy_boot(1, fw_addr);
++
++	return ltq_eth_initialize(&eth_board_config);
++}
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -537,6 +537,9 @@ Active  mips        mips32         incai
+ Active  mips        mips32         vrx200      arcadyan        vgv7510kw22         vgv7510kw22_brn                      vgv7510kw22:SYS_BOOT_BRN                                                                                                           Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+ Active  mips        mips32         vrx200      arcadyan        vgv7510kw22         vgv7510kw22_nor                      vgv7510kw22:SYS_BOOT_NOR                                                                                                           Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+ Active  mips        mips32         vrx200      arcadyan        vgv7510kw22         vgv7510kw22_ram                      vgv7510kw22:SYS_BOOT_RAM                                                                                                           Martin Blumenstingl <martin.blumenstingl at googlemail.com>
++Active  mips        mips32         vrx200      arcadyan        vgv7519             vgv7519_brn                          vgv7519:SYS_BOOT_BRN                                                                                                              Mathias Kresin <dev at kresin.me>
++Active  mips        mips32         vrx200      arcadyan        vgv7519             vgv7519_nor                          vgv7519:SYS_BOOT_NOR                                                                                                              Eddi De Pieri <eddi at depieri.net>
++Active  mips        mips32         vrx200      arcadyan        vgv7519             vgv7519_ram                          vgv7519:SYS_BOOT_RAM                                                                                                              Eddi De Pieri <eddi at depieri.net>
+ Active  mips        mips32         vrx200      avm             fb3370              fb3370_eva                           fb3370:SYS_BOOT_EVA                                                                                                               Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active  mips        mips32         vrx200      avm             fb3370              fb3370_ram                           fb3370:SYS_BOOT_RAM                                                                                                               Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active  mips        mips32         vrx200      avm             fb3370              fb3370_sfspl                         fb3370:SYS_BOOT_SFSPL                                                                                                             Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+--- /dev/null
++++ b/include/configs/vgv7519.h
+@@ -0,0 +1,62 @@
++/*
++ * This file is released under the terms of GPL v2 and any later version.
++ * See the file COPYING in the root directory of the source tree for details.
++ *
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE	"VGV7519"
++#define CONFIG_IDENT_STRING	" "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME	"Arcadyan VGV7519"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART		/* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET	/* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH	/* Have a parallel NOR flash */
++
++#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
++#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH2_BASE }
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE		0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_IS_NOWHERE
++#define CONFIG_ENV_OVERWRITE		1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET		(384 * 1024)
++#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE			(8 * 1024)
++
++#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE			115200
++#define CONFIG_CONSOLE_ASC		1
++#define CONFIG_CONSOLE_DEV		"ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_EXTRA_ENV_SETTINGS	\
++	CONFIG_ENV_LANTIQ_DEFAULTS \
++	"kernel_addr=0xB0080000\0"
++
++#endif /* __CONFIG_H */
-- 
1.9.1




More information about the Lede-dev mailing list