[LEDE-DEV] [PATCH 2/6] uboot-lantiq: reorder and rework patches
Mathias Kresin
dev at kresin.me
Sat May 21 03:13:36 PDT 2016
use:
- 00nn for u-boot patches
- 01nn for new boards
While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.
Signed-off-by: Mathias Kresin <dev at kresin.me>
---
package/boot/uboot-lantiq/Makefile | 2 +-
...014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch | 662 ---------------------
...22-MIPS-lantiq-add-default-openwrt-config.patch | 50 ++
...lantiq-easy80920-add-support-for-NAND-SPL.patch | 61 --
...23-MIPS-lantiq-add-default-openwrt-config.patch | 50 --
.../uboot-lantiq/patches/0023-lzma-fixup.patch | 39 ++
...tiq-easy50712-add-openwrt-lantiq-common.h.patch | 26 -
...e-prepare-u-boot-lantiq-v2013.10-openwrt4.patch | 18 +
...tiq-easy80920-add-openwrt-lantiq-common.h.patch | 26 -
.../patches/0025-arx100-cgu-fixes.patch | 148 +++++
...PS-add-board-support-for-Arcadyan-ARV4519.patch | 242 --------
.../patches/0026-no_extern_inline.patch | 97 +++
...PS-add-board-support-for-Arcadyan-ARV7518.patch | 242 --------
.../uboot-lantiq/patches/0027-no_weak_alias.patch | 26 +
...S-add-board-support-for-AudioCodes-MP-252.patch | 248 --------
.../patches/0028-add-gcc5-support.patch | 87 +++
...S-add-board-support-for-AVM-FritzBox-3370.patch | 354 -----------
...-MIPS-add-board-support-for-Gigaset-SX76X.patch | 247 --------
...-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch | 301 ----------
...-add-board-support-for-Arcadyan-ARV752DPW.patch | 242 --------
...dd-board-support-for-Arcadyan-ARV752DPW22.patch | 244 --------
...PS-add-board-support-for-Arcadyan-ARV7510.patch | 269 ---------
...dd-board-support-for-Arcadyan-ARV7510PW22.patch | 238 --------
...e-prepare-u-boot-lantiq-v2013.10-openwrt4.patch | 18 -
.../uboot-lantiq/patches/0041-lzma-fixup.patch | 44 --
.../patches/0042-arx100-cgu-fixes.patch | 148 -----
...dd-board-support-for-Arcadyan-VGV7510KW22.patch | 346 -----------
...dd-board-support-for-Arcadyan-ARV8539PW22.patch | 240 --------
.../patches/0045-no_extern_inline.patch | 101 ----
.../uboot-lantiq/patches/0046-no_weak_alias.patch | 28 -
.../patches/0047-add-gcc5-support.patch | 93 ---
...100-MIPS-add-board-support-for-Easy-50712.patch | 306 ++++++++++
...101-MIPS-add-board-support-for-Easy-80920.patch | 379 ++++++++++++
...-add-board-support-for-Arcadyan-ARV4519PW.patch | 242 ++++++++
...-add-board-support-for-Arcadyan-ARV7518PW.patch | 242 ++++++++
...S-add-board-support-for-AudioCodes-MP-252.patch | 248 ++++++++
...S-add-board-support-for-AVM-FritzBox-3370.patch | 354 +++++++++++
...-MIPS-add-board-support-for-Gigaset-SX76X.patch | 247 ++++++++
...-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch | 301 ++++++++++
...-add-board-support-for-Arcadyan-ARV752DPW.patch | 242 ++++++++
...dd-board-support-for-Arcadyan-ARV752DPW22.patch | 244 ++++++++
...-add-board-support-for-Arcadyan-ARV7510PW.patch | 269 +++++++++
...dd-board-support-for-Arcadyan-ARV7510PW22.patch | 238 ++++++++
...dd-board-support-for-Arcadyan-VGV7510KW22.patch | 346 +++++++++++
...dd-board-support-for-Arcadyan-ARV8539PW22.patch | 239 ++++++++
45 files changed, 4363 insertions(+), 4471 deletions(-)
create mode 100644 package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-add-default-openwrt-config.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-easy80920-add-support-for-NAND-SPL.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0023-MIPS-lantiq-add-default-openwrt-config.patch
create mode 100644 package/boot/uboot-lantiq/patches/0023-lzma-fixup.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0024-MIPS-lantiq-easy50712-add-openwrt-lantiq-common.h.patch
create mode 100644 package/boot/uboot-lantiq/patches/0024-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0025-MIPS-lantiq-easy80920-add-openwrt-lantiq-common.h.patch
create mode 100644 package/boot/uboot-lantiq/patches/0025-arx100-cgu-fixes.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Arcadyan-ARV4519.patch
create mode 100644 package/boot/uboot-lantiq/patches/0026-no_extern_inline.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch
create mode 100644 package/boot/uboot-lantiq/patches/0027-no_weak_alias.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-AudioCodes-MP-252.patch
create mode 100644 package/boot/uboot-lantiq/patches/0028-add-gcc5-support.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0029-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0030-MIPS-add-board-support-for-Gigaset-SX76X.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0037-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0038-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0039-MIPS-add-board-support-for-Arcadyan-ARV7510.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0041-MIPS-add-board-support-for-Arcadyan-ARV7510PW22.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0041-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0041-lzma-fixup.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0042-arx100-cgu-fixes.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0043-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0044-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0045-no_extern_inline.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0046-no_weak_alias.patch
delete mode 100644 package/boot/uboot-lantiq/patches/0047-add-gcc5-support.patch
create mode 100644 package/boot/uboot-lantiq/patches/0100-MIPS-add-board-support-for-Easy-50712.patch
create mode 100644 package/boot/uboot-lantiq/patches/0101-MIPS-add-board-support-for-Easy-80920.patch
create mode 100644 package/boot/uboot-lantiq/patches/0102-MIPS-add-board-support-for-Arcadyan-ARV4519PW.patch
create mode 100644 package/boot/uboot-lantiq/patches/0103-MIPS-add-board-support-for-Arcadyan-ARV7518PW.patch
create mode 100644 package/boot/uboot-lantiq/patches/0104-MIPS-add-board-support-for-AudioCodes-MP-252.patch
create mode 100644 package/boot/uboot-lantiq/patches/0105-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
create mode 100644 package/boot/uboot-lantiq/patches/0106-MIPS-add-board-support-for-Gigaset-SX76X.patch
create mode 100644 package/boot/uboot-lantiq/patches/0107-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch
create mode 100644 package/boot/uboot-lantiq/patches/0108-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch
create mode 100644 package/boot/uboot-lantiq/patches/0109-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch
create mode 100644 package/boot/uboot-lantiq/patches/0110-MIPS-add-board-support-for-Arcadyan-ARV7510PW.patch
create mode 100644 package/boot/uboot-lantiq/patches/0111-MIPS-add-board-support-for-Arcadyan-ARV7510PW22.patch
create mode 100644 package/boot/uboot-lantiq/patches/0112-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch
create mode 100644 package/boot/uboot-lantiq/patches/0113-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch
diff --git a/package/boot/uboot-lantiq/Makefile b/package/boot/uboot-lantiq/Makefile
index 99b101f..11a10f0 100644
--- a/package/boot/uboot-lantiq/Makefile
+++ b/package/boot/uboot-lantiq/Makefile
@@ -302,7 +302,7 @@ UBOOTS:= \
arv7518pw_ram arv7518pw_nor arv7518pw_brn \
arv752dpw_ram arv752dpw_nor arv752dpw_brn \
arv752dpw22_ram arv752dpw22_nor arv752dpw22_brn \
- arv8539pw22_brn arv8539pw22_nor arv8539pw22_ram \
+ arv8539pw22_brn arv8539pw22_nor arv8539pw22_ram \
gigasx76x_ram gigasx76x_nor \
acmp252_ram acmp252_nor \
easy50712_ram easy50712_nor easy50712_norspl \
diff --git a/package/boot/uboot-lantiq/patches/0014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch b/package/boot/uboot-lantiq/patches/0014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch
index ef6eb1a..1f3bf83 100644
--- a/package/boot/uboot-lantiq/patches/0014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch
+++ b/package/boot/uboot-lantiq/patches/0014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch
@@ -5019,491 +5019,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
board_early_init_f,
timer_init,
env_init, /* initialize environment */
---- /dev/null
-+++ b/board/lantiq/easy50712/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/lantiq/easy50712/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/lantiq/easy50712/ddr_settings.h
-@@ -0,0 +1,54 @@
-+/*
-+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x102
-+#define MC_DC09_VALUE 0x70a
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xc02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x13c
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xd
-+#define MC_DC18_VALUE 0x300
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA04
-+#define MC_DC21_VALUE 0xd00
-+#define MC_DC22_VALUE 0xd0d
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x62
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x2d89
-+#define MC_DC30_VALUE 0x8300
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- /dev/null
-+++ b/board/lantiq/easy50712/easy50712.c
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2010 Thomas Langer <thomas.langer at lantiq.com>
-+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <spi.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+static void gpio_init(void)
-+{
-+ /* SPI/CS output (low-active) for serial flash */
-+ gpio_direction_output(22, 1);
-+
-+ /* EBU.FL_CS1 as output for NAND CE */
-+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* EBU.FL_A23 as output for NAND CLE */
-+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* EBU.FL_A24 as output for NAND ALE */
-+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+
-+ /* enable CLK_OUT2 for external switch */
-+ gpio_set_altfunc(3, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+}
-+
-+int board_early_init_f(void)
-+{
-+ gpio_init();
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Lantiq ADM6996I switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device adm6996i_dev = {
-+ .name = "adm6996i",
-+ .cpu_port = 5,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ /* Deactivate HRST line to release reset of ADM6996I switch */
-+ ltq_reset_once(LTQ_RESET_HARD, 200000);
-+
-+ /* ADM6996I needs some time to come out of reset */
-+ __udelay(50000);
-+
-+ return switch_device_register(&adm6996i_dev);
-+}
-+
-+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-+{
-+ if (bus)
-+ return 0;
-+
-+ switch (cs) {
-+ case 2:
-+ return 1;
-+ default:
-+ return 0;
-+ }
-+}
-+
-+void spi_cs_activate(struct spi_slave *slave)
-+{
-+ switch (slave->cs) {
-+ case 2:
-+ gpio_set_value(22, 0);
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+void spi_cs_deactivate(struct spi_slave *slave)
-+{
-+ switch (slave->cs) {
-+ case 2:
-+ gpio_set_value(22, 1);
-+ break;
-+ default:
-+ break;
-+ }
-+}
---- /dev/null
-+++ b/board/lantiq/easy80920/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/lantiq/easy80920/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/lantiq/easy80920/ddr_settings.h
-@@ -0,0 +1,69 @@
-+/*
-+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_CCR00_VALUE 0x101
-+#define MC_CCR01_VALUE 0x1000100
-+#define MC_CCR02_VALUE 0x1010000
-+#define MC_CCR03_VALUE 0x101
-+#define MC_CCR04_VALUE 0x1000000
-+#define MC_CCR05_VALUE 0x1000101
-+#define MC_CCR06_VALUE 0x1000100
-+#define MC_CCR07_VALUE 0x1010000
-+#define MC_CCR08_VALUE 0x1000101
-+#define MC_CCR09_VALUE 0x0
-+#define MC_CCR10_VALUE 0x2000100
-+#define MC_CCR11_VALUE 0x2000300
-+#define MC_CCR12_VALUE 0x30000
-+#define MC_CCR13_VALUE 0x202
-+#define MC_CCR14_VALUE 0x7080A0F
-+#define MC_CCR15_VALUE 0x2040F
-+#define MC_CCR16_VALUE 0x40000
-+#define MC_CCR17_VALUE 0x70102
-+#define MC_CCR18_VALUE 0x4020002
-+#define MC_CCR19_VALUE 0x30302
-+#define MC_CCR20_VALUE 0x8000700
-+#define MC_CCR21_VALUE 0x40F020A
-+#define MC_CCR22_VALUE 0x0
-+#define MC_CCR23_VALUE 0xC020000
-+#define MC_CCR24_VALUE 0x4401B04
-+#define MC_CCR25_VALUE 0x0
-+#define MC_CCR26_VALUE 0x0
-+#define MC_CCR27_VALUE 0x6420000
-+#define MC_CCR28_VALUE 0x0
-+#define MC_CCR29_VALUE 0x0
-+#define MC_CCR30_VALUE 0x798
-+#define MC_CCR31_VALUE 0x0
-+#define MC_CCR32_VALUE 0x0
-+#define MC_CCR33_VALUE 0x650000
-+#define MC_CCR34_VALUE 0x200C8
-+#define MC_CCR35_VALUE 0x1D445D
-+#define MC_CCR36_VALUE 0xC8
-+#define MC_CCR37_VALUE 0xC351
-+#define MC_CCR38_VALUE 0x0
-+#define MC_CCR39_VALUE 0x141F04
-+#define MC_CCR40_VALUE 0x142704
-+#define MC_CCR41_VALUE 0x141b42
-+#define MC_CCR42_VALUE 0x141b42
-+#define MC_CCR43_VALUE 0x566504
-+#define MC_CCR44_VALUE 0x566504
-+#define MC_CCR45_VALUE 0x565F17
-+#define MC_CCR46_VALUE 0x565F17
-+#define MC_CCR47_VALUE 0x0
-+#define MC_CCR48_VALUE 0x0
-+#define MC_CCR49_VALUE 0x0
-+#define MC_CCR50_VALUE 0x0
-+#define MC_CCR51_VALUE 0x0
-+#define MC_CCR52_VALUE 0x133
-+#define MC_CCR53_VALUE 0xF3014B27
-+#define MC_CCR54_VALUE 0xF3014B27
-+#define MC_CCR55_VALUE 0xF3014B27
-+#define MC_CCR56_VALUE 0xF3014B27
-+#define MC_CCR57_VALUE 0x7800301
-+#define MC_CCR58_VALUE 0x7800301
-+#define MC_CCR59_VALUE 0x7800301
-+#define MC_CCR60_VALUE 0x7800301
-+#define MC_CCR61_VALUE 0x4
---- /dev/null
-+++ b/board/lantiq/easy80920/easy80920.c
-@@ -0,0 +1,138 @@
-+/*
-+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <spi.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/chipid.h>
-+#include <asm/lantiq/cpu.h>
-+#include <asm/arch/gphy.h>
-+
-+#if defined(CONFIG_SPL_BUILD)
-+#define do_gpio_init 1
-+#define do_pll_init 1
-+#define do_dcdc_init 0
-+#elif defined(CONFIG_SYS_BOOT_RAM)
-+#define do_gpio_init 1
-+#define do_pll_init 0
-+#define do_dcdc_init 1
-+#elif defined(CONFIG_SYS_BOOT_NOR)
-+#define do_gpio_init 1
-+#define do_pll_init 1
-+#define do_dcdc_init 1
-+#else
-+#define do_gpio_init 0
-+#define do_pll_init 0
-+#define do_dcdc_init 1
-+#endif
-+
-+static void gpio_init(void)
-+{
-+ /* SPI CS 0.4 to serial flash */
-+ gpio_direction_output(10, 1);
-+
-+ /* EBU.FL_CS1 as output for NAND CE */
-+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* EBU.FL_A23 as output for NAND CLE */
-+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* EBU.FL_A24 as output for NAND ALE */
-+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* GPIO 3.0 as input for NAND Ready Busy */
-+ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
-+ /* GPIO 3.1 as output for NAND Read */
-+ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+}
-+
-+int board_early_init_f(void)
-+{
-+ if (do_gpio_init)
-+ gpio_init();
-+
-+ if (do_pll_init)
-+ ltq_pll_init();
-+
-+ if (do_dcdc_init)
-+ ltq_dcdc_init(0x7F);
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
-+ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
-+ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
-+ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
-+ /* GMAC3: unused */
-+ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
-+ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
-+ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
-+ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
-+ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t * bis)
-+{
-+ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
-+ const ulong fw_addr = 0x80FF0000;
-+
-+ ltq_gphy_phy11g_a1x_load(fw_addr);
-+
-+ ltq_cgu_gphy_clk_src(clk);
-+
-+ ltq_rcu_gphy_boot(0, fw_addr);
-+ ltq_rcu_gphy_boot(1, fw_addr);
-+
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-+{
-+ if (bus)
-+ return 0;
-+
-+ if (cs == 4)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+void spi_cs_activate(struct spi_slave *slave)
-+{
-+ switch (slave->cs) {
-+ case 4:
-+ gpio_set_value(10, 0);
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+void spi_cs_deactivate(struct spi_slave *slave)
-+{
-+ switch (slave->cs) {
-+ case 4:
-+ gpio_set_value(10, 1);
-+ break;
-+ default:
-+ break;
-+ }
-+}
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -502,10 +502,17 @@ Active mips mips32 au1x0
- Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas at corelatus.se>
- Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas at corelatus.se>
- Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
-+Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 incaip - incaip incaip - Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd at denx.de>
-+Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
- Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
- Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot at andestech.com>
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -12,6 +12,7 @@ LIB := $(obj)libdma.o
@@ -8782,183 +8297,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+ return ret;
+}
---- /dev/null
-+++ b/include/configs/easy50712.h
-@@ -0,0 +1,79 @@
-+/*
-+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "EASY50712"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Lantiq EASY50712 Danube Reference Board"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
-+#define CONFIG_SPI_FLASH_ATMEL /* Have an AT45DB321D serial flash */
-+
-+#define CONFIG_LTQ_SUPPORT_NAND_FLASH
-+
-+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
-+
-+#define CONFIG_LTQ_SPL_COMP_LZO
-+#define CONFIG_LTQ_SPL_CONSOLE
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_ADM6996I
-+
-+/* Environment */
-+#define CONFIG_ENV_SPI_BUS 0
-+#define CONFIG_ENV_SPI_CS 2
-+#define CONFIG_ENV_SPI_MAX_HZ 20000000
-+#define CONFIG_ENV_SPI_MODE 0
-+
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (256 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#elif defined(CONFIG_SYS_BOOT_NORSPL)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (128 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Commands */
-+#define CONFIG_CMD_PING
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR
-+
-+#endif /* __CONFIG_H */
---- /dev/null
-+++ b/include/configs/easy80920.h
-@@ -0,0 +1,92 @@
-+/*
-+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "EASY80920"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Lantiq EASY80920 VRX200 Family Board"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
-+#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29LV620 serial flash */
-+
-+#define CONFIG_LTQ_SUPPORT_NAND_FLASH
-+
-+#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
-+#define CONFIG_SPL_SPI_BUS 0
-+#define CONFIG_SPL_SPI_CS 4
-+#define CONFIG_SPL_SPI_MAX_HZ 25000000
-+#define CONFIG_SPL_SPI_MODE 0
-+
-+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
-+
-+#define CONFIG_LTQ_SPL_COMP_LZO
-+#define CONFIG_LTQ_SPL_CONSOLE
-+
-+#define CONFIG_SYS_DRAM_PROBE
-+
-+/* Environment */
-+#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
-+#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
-+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
-+#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
-+
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (384 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#elif defined(CONFIG_SYS_BOOT_NORSPL)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#elif defined(CONFIG_SYS_BOOT_SFSPL)
-+#define CONFIG_ENV_IS_IN_SPI_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Commands */
-+#define CONFIG_CMD_PING
-+
-+/* Pull in default board configs for Lantiq XWAY VRX200 */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_SF \
-+ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ CONFIG_ENV_UPDATE_UBOOT_SF
-+
-+#endif /* __CONFIG_H */
--- a/include/phy.h
+++ b/include/phy.h
@@ -214,6 +214,7 @@ int phy_atheros_init(void);
diff --git a/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-add-default-openwrt-config.patch b/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-add-default-openwrt-config.patch
new file mode 100644
index 0000000..3b50c98
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-add-default-openwrt-config.patch
@@ -0,0 +1,50 @@
+From 8f584936adad0fca8beece5f55eadcdcd02fad0a Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka at openwrt.org>
+Date: Sat, 17 Aug 2013 03:44:46 +0200
+Subject: MIPS: lantiq: add default openwrt config
+
+Signed-off-by: Luka Perkov <luka at openwrt.org>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- /dev/null
++++ b/include/configs/openwrt-lantiq-common.h
+@@ -0,0 +1,39 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __OPENWRT_LANTIQ_COMMON_H
++#define __OPENWRT_LANTIQ_COMMON_H
++
++/* Commands */
++#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
++#define CONFIG_CMD_PING
++#endif
++
++/* Compression */
++#define CONFIG_LZMA
++
++/* Auto boot */
++#define CONFIG_BOOTDELAY 2
++
++/* Environment */
++#if !defined(CONFIG_SYS_BOOT_RAM)
++#define CONFIG_BOOTCOMMAND \
++ "bootm ${kernel_addr}"
++#endif
++
++/* Ethernet */
++#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
++#define CONFIG_ETHADDR 00:01:02:03:04:05
++#define CONFIG_SERVERIP 192.168.1.2
++#define CONFIG_IPADDR 192.168.1.1
++#endif
++
++/* Unnecessary */
++#undef CONFIG_BOOTM_NETBSD
++#undef CONFIG_BOOTM_PLAN9
++#undef CONFIG_BOOTM_RTEMS
++
++#endif /* __OPENWRT_LANTIQ_COMMON_H */
diff --git a/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-easy80920-add-support-for-NAND-SPL.patch b/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-easy80920-add-support-for-NAND-SPL.patch
deleted file mode 100644
index 8e1d5bd..0000000
--- a/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-easy80920-add-support-for-NAND-SPL.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 6fa1c350fa19a054371eccef84e4885cfdd6a2d7 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-Date: Mon, 19 Aug 2013 18:11:31 +0200
-Subject: MIPS: lantiq: easy80920: add support for NAND SPL
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -509,6 +509,7 @@ Active mips mips32 incai
- Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd at denx.de>
-+Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---- a/include/configs/easy80920.h
-+++ b/include/configs/easy80920.h
-@@ -31,6 +31,14 @@
-
- #define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
-
-+#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
-+#define CONFIG_SYS_NAND_PAGE_COUNT 128
-+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-+#define CONFIG_SYS_NAND_OOBSIZE 64
-+#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024)
-+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000
-+
- #define CONFIG_LTQ_SPL_COMP_LZO
- #define CONFIG_LTQ_SPL_CONSOLE
-
-@@ -57,6 +65,11 @@
- #define CONFIG_ENV_OVERWRITE
- #define CONFIG_ENV_OFFSET (192 * 1024)
- #define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#elif defined(CONFIG_SYS_BOOT_NANDSPL)
-+#define CONFIG_ENV_IS_IN_NAND
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (256 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (256 * 1024)
- #else
- #define CONFIG_ENV_IS_NOWHERE
- #endif
-@@ -84,9 +97,13 @@
- #define CONFIG_ENV_UPDATE_UBOOT_SF \
- "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
-
-+#define CONFIG_ENV_UPDATE_UBOOT_NAND \
-+ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
-+
- #define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_ENV_LANTIQ_DEFAULTS \
- CONFIG_ENV_UPDATE_UBOOT_NOR \
-- CONFIG_ENV_UPDATE_UBOOT_SF
-+ CONFIG_ENV_UPDATE_UBOOT_SF \
-+ CONFIG_ENV_UPDATE_UBOOT_NAND
-
- #endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0023-MIPS-lantiq-add-default-openwrt-config.patch b/package/boot/uboot-lantiq/patches/0023-MIPS-lantiq-add-default-openwrt-config.patch
deleted file mode 100644
index 3b50c98..0000000
--- a/package/boot/uboot-lantiq/patches/0023-MIPS-lantiq-add-default-openwrt-config.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 8f584936adad0fca8beece5f55eadcdcd02fad0a Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka at openwrt.org>
-Date: Sat, 17 Aug 2013 03:44:46 +0200
-Subject: MIPS: lantiq: add default openwrt config
-
-Signed-off-by: Luka Perkov <luka at openwrt.org>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- /dev/null
-+++ b/include/configs/openwrt-lantiq-common.h
-@@ -0,0 +1,39 @@
-+/*
-+ * Copyright (C) 2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __OPENWRT_LANTIQ_COMMON_H
-+#define __OPENWRT_LANTIQ_COMMON_H
-+
-+/* Commands */
-+#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
-+#define CONFIG_CMD_PING
-+#endif
-+
-+/* Compression */
-+#define CONFIG_LZMA
-+
-+/* Auto boot */
-+#define CONFIG_BOOTDELAY 2
-+
-+/* Environment */
-+#if !defined(CONFIG_SYS_BOOT_RAM)
-+#define CONFIG_BOOTCOMMAND \
-+ "bootm ${kernel_addr}"
-+#endif
-+
-+/* Ethernet */
-+#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
-+#define CONFIG_ETHADDR 00:01:02:03:04:05
-+#define CONFIG_SERVERIP 192.168.1.2
-+#define CONFIG_IPADDR 192.168.1.1
-+#endif
-+
-+/* Unnecessary */
-+#undef CONFIG_BOOTM_NETBSD
-+#undef CONFIG_BOOTM_PLAN9
-+#undef CONFIG_BOOTM_RTEMS
-+
-+#endif /* __OPENWRT_LANTIQ_COMMON_H */
diff --git a/package/boot/uboot-lantiq/patches/0023-lzma-fixup.patch b/package/boot/uboot-lantiq/patches/0023-lzma-fixup.patch
new file mode 100644
index 0000000..7c15938
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0023-lzma-fixup.patch
@@ -0,0 +1,39 @@
+From: Antonios Vamporakis <ant at area128.com>
+Date: Tue, 31 Dec 2013 01:05:42 +0100
+Subject: [PATCH] lzma: fix buffer bound check error
+
+Variable uncompressedSize references the space available, while outSizeFull is
+the actual expected uncompressed size. Using the wrong value causes LzmaDecode
+to return SZ_ERROR_INPUT_EOF. Problem was introduced in commit afca294. While
+at it add additional debug message.
+
+Signed-off-by: Antonios Vamporakis <ant at area128.com>
+CC: Kees Cook <keescook at chromium.org>
+CC: Simon Glass <sjg at chromium.org>
+CC: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+CC: Luka Perkov <luka at openwrt.org>
+---
+ lib/lzma/LzmaTools.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/lib/lzma/LzmaTools.c
++++ b/lib/lzma/LzmaTools.c
+@@ -102,7 +102,7 @@ int lzmaBuffToBuffDecompress (unsigned c
+ return SZ_ERROR_OUTPUT_EOF;
+
+ /* Decompress */
+- outProcessed = *uncompressedSize;
++ outProcessed = outSizeFull;
+
+ WATCHDOG_RESET();
+
+@@ -111,6 +111,9 @@ int lzmaBuffToBuffDecompress (unsigned c
+ inStream + LZMA_DATA_OFFSET, &compressedSize,
+ inStream, LZMA_PROPS_SIZE, LZMA_FINISH_END, &state, &g_Alloc);
+ *uncompressedSize = outProcessed;
++
++ debug("LZMA: Uncompresed ................ 0x%zx\n", outProcessed);
++
+ if (res != SZ_OK) {
+ return res;
+ }
diff --git a/package/boot/uboot-lantiq/patches/0024-MIPS-lantiq-easy50712-add-openwrt-lantiq-common.h.patch b/package/boot/uboot-lantiq/patches/0024-MIPS-lantiq-easy50712-add-openwrt-lantiq-common.h.patch
deleted file mode 100644
index 5afe427..0000000
--- a/package/boot/uboot-lantiq/patches/0024-MIPS-lantiq-easy50712-add-openwrt-lantiq-common.h.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From ac6896098d9dd62a248340e6a090574399e1fd87 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-Date: Mon, 19 Aug 2013 18:46:47 +0200
-Subject: MIPS: lantiq: easy50712: add openwrt-lantiq-common.h
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- a/include/configs/easy50712.h
-+++ b/include/configs/easy50712.h
-@@ -62,13 +62,13 @@
- #define CONFIG_CONSOLE_ASC 1
- #define CONFIG_CONSOLE_DEV "ttyLTQ1"
-
--/* Commands */
--#define CONFIG_CMD_PING
--
- /* Pull in default board configs for Lantiq XWAY Danube */
- #include <asm/lantiq/config.h>
- #include <asm/arch/config.h>
-
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
- #define CONFIG_ENV_UPDATE_UBOOT_NOR \
- "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
-
diff --git a/package/boot/uboot-lantiq/patches/0024-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch b/package/boot/uboot-lantiq/patches/0024-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch
new file mode 100644
index 0000000..1f89e54
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0024-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch
@@ -0,0 +1,18 @@
+From 7e2f79bc40b572763a4a1ed69f63aa2eaa6df254 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+Date: Sun, 20 Oct 2013 19:39:17 +0200
+Subject: Makefile: prepare u-boot-lantiq-v2013.10-openwrt4
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- a/Makefile
++++ b/Makefile
+@@ -8,7 +8,7 @@
+ VERSION = 2013
+ PATCHLEVEL = 10
+ SUBLEVEL =
+-EXTRAVERSION =
++EXTRAVERSION = -openwrt4
+ ifneq "$(SUBLEVEL)" ""
+ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+ else
diff --git a/package/boot/uboot-lantiq/patches/0025-MIPS-lantiq-easy80920-add-openwrt-lantiq-common.h.patch b/package/boot/uboot-lantiq/patches/0025-MIPS-lantiq-easy80920-add-openwrt-lantiq-common.h.patch
deleted file mode 100644
index 2f9fd59..0000000
--- a/package/boot/uboot-lantiq/patches/0025-MIPS-lantiq-easy80920-add-openwrt-lantiq-common.h.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 7afbe4633773905ef94a8404510fb5a459926000 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-Date: Mon, 19 Aug 2013 18:11:57 +0200
-Subject: MIPS: lantiq: easy80920: add openwrt-lantiq-common.h
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- a/include/configs/easy80920.h
-+++ b/include/configs/easy80920.h
-@@ -84,13 +84,13 @@
- #define CONFIG_CONSOLE_ASC 1
- #define CONFIG_CONSOLE_DEV "ttyLTQ1"
-
--/* Commands */
--#define CONFIG_CMD_PING
--
- /* Pull in default board configs for Lantiq XWAY VRX200 */
- #include <asm/lantiq/config.h>
- #include <asm/arch/config.h>
-
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
- #define CONFIG_ENV_UPDATE_UBOOT_NOR \
- "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
-
diff --git a/package/boot/uboot-lantiq/patches/0025-arx100-cgu-fixes.patch b/package/boot/uboot-lantiq/patches/0025-arx100-cgu-fixes.patch
new file mode 100644
index 0000000..ff2f99c
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0025-arx100-cgu-fixes.patch
@@ -0,0 +1,148 @@
+From patchwork Tue Jan 20 11:28:45 2015
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image
+From: Ben Mulvihill <ben.mulvihill at gmail.com>
+X-Patchwork-Id: 431024
+Message-Id: <1421753325.25187.58.camel at merveille.lan>
+To: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+Cc: OpenWrt Development List <openwrt-devel at lists.openwrt.org>
+Date: Tue, 20 Jan 2015 12:28:45 +0100
+
+On Tue, 2015-01-20 at 00:39 +0100, Ben Mulvihill wrote:
+> On Mon, 2015-01-19 at 19:21 +0100, Ben Mulvihill wrote:
+> > On Mon, 2015-01-19 at 16:47 +0100, Daniel Schwierzeck wrote:
+> > > 2015-01-19 15:44 GMT+01:00 Ben Mulvihill <ben.mulvihill at gmail.com>:
+> > > > On Mon, 2015-01-19 at 11:51 +0000, Conor O'Gorman wrote:
+> > > >> On 19/01/15 10:46, Ben Mulvihill wrote:
+> > > >> > Hello,
+> > > >> >
+> > > >> > I am trying to build uboot-lantiq for the BT Home Hub 3A (lantiq
+> > > >> > ar9), and am wondering where to initialise the cgu, in the case
+> > > >> > of a ramboot image for uart booting. Normally the cgu is initialised
+> > > >> > in lowlevel_init, but that code is bypassed in ramboot images. The
+> > > >> > result is that the board boots with the wrong cgu settings, which
+> > > >> > sends the console haywire. So far I have tried two solutions:
+> > > >>
+> > > >> Another option is to try and not change anything. The console is already
+> > > >> configured and running. The ram does need config.
+> > > >>
+> > > >> I was used to seeing the ramboot version running at half clock speed, at
+> > > >> least on danube, previous to ar9.
+> > > >>
+> > > >> Conor
+> > > >
+> > > > Hi Conor,
+> > > >
+> > > > Thanks for the reply. But with the latest uboot-lantiq, not changing
+> > > > anything means that I don't get a usable console. With an older
+> > > > version I do at least get a uboot console, but no linux console when
+> > > > I boot openwrt. Correcting the cgu settings solves both problems.
+> > > >
+> > >
+> > > could you try this?
+> > >
+> > > diff --git a/arch/mips/cpu/mips32/arx100/cgu.c
+> > > b/arch/mips/cpu/mips32/arx100/cgu.c
+> > > index 6e71ee7..e0afbda 100644
+> > > --- a/arch/mips/cpu/mips32/arx100/cgu.c
+> > > +++ b/arch/mips/cpu/mips32/arx100/cgu.c
+> > > @@ -95,15 +95,5 @@ unsigned long ltq_get_cpu_clock(void)
+> > >
+> > > unsigned long ltq_get_bus_clock(void)
+> > > {
+> > > - u32 fpi_sel;
+> > > - unsigned long clk;
+> > > -
+> > > - fpi_sel = ltq_cgu_sys_readl(1, CGU_SYS_FPI_SEL);
+> > > -
+> > > - if (fpi_sel)
+> > > - clk = ltq_get_io_region_clock() / 2;
+> > > - else
+> > > - clk = ltq_get_io_region_clock();
+> > > -
+> > > - return clk;
+> > > + return ltq_get_io_region_clock();
+> > > }
+> > >
+> > > the UART driver calculates the baudrate from the FPI bus clock, but
+> > > FPI_SEL is not available on AR9. FPI bus clock is always the same as
+> > > DDR clock, Obviously a copy&paste error from VR9 code ;)
+> > >
+> >
+> > No, even with this patch, I still don't get a working console I'm
+> > afraid. If I don't set anything explicitly, the board comes up with
+> > CGU_SYS set to 0x05, ie CGU_SYS_SYSSEL_PLL0_333_MHZ |
+> > CGU_SYS_CPUSEL_EQUAL_DDRCLK | CGU_SYS_DDRSEL_THIRD_SYSCLK.
+> > Is this a valid combination without CGU_SYS_PPESEL_250_MHZ ?
+> > I don't understand what CGU_SYS_PPESEL_250_MHZ does?
+> > The "right setting", as set by the stock uboot, is 0x80.
+>
+> P.S. There also seems to be a discrepancy between the uboot and
+> linux code. I take it from what you say above that fpi clock, ddr
+> clock and io region clock are all the same. Now if the least
+> significant bit of CGU_SYS is set, then according to the uboot
+> code - function ltq_get_bus_clock() - their value is one
+> third of the system clock. But according to the linux code
+> - function ltq_ar9_fpi_hz() in arch/mips/lantiq/xway/clk.c -
+> their value in this case is equal to the system clock.
+>
+> Or am I getting muddled? It's past my bedtime!
+>
+>
+
+Some of the bitshifting in arch/mips/cpu/mips32/arx100/cgu.c is 1
+out. A patch along these lines should fix it:
+
+--- a/arch/mips/cpu/mips32/arx100/cgu.c
++++ b/arch/mips/cpu/mips32/arx100/cgu.c
+@@ -10,12 +10,17 @@
+ #include <asm/lantiq/clk.h>
+ #include <asm/lantiq/io.h>
+
+-#define CGU_SYS_DDR_SEL (1 << 0)
+-#define CGU_SYS_CPU_SEL (1 << 2)
++#define CGU_SYS_DDR_SHIFT 0
++#define CGU_SYS_CPU_SHIFT 2
+ #define CGU_SYS_SYS_SHIFT 3
++#define CGU_SYS_FPI_SHIFT 6
++#define CGU_SYS_PPE_SHIFT 7
++
++#define CGU_SYS_DDR_MASK (1 << CGU_SYS_DDR_SHIFT)
++#define CGU_SYS_CPU_MASK (1 << CGU_SYS_CPU_SHIFT)
+ #define CGU_SYS_SYS_MASK (0x3 << CGU_SYS_SYS_SHIFT)
+-#define CGU_SYS_FPI_SEL (1 << 6)
+-#define CGU_SYS_PPE_SEL (1 << 7)
++#define CGU_SYS_FPI_MASK (1 << CGU_SYS_FPI_SHIFT)
++#define CGU_SYS_PPE_MASK (1 << CGU_SYS_PPE_SHIFT)
+
+ struct ltq_cgu_regs {
+ u32 rsvd0;
+@@ -68,7 +73,7 @@ unsigned long ltq_get_io_region_clock(vo
+ u32 ddr_sel;
+ unsigned long clk;
+
+- ddr_sel = ltq_cgu_sys_readl(1, CGU_SYS_DDR_SEL);
++ ddr_sel = ltq_cgu_sys_readl(CGU_SYS_DDR_MASK, CGU_SYS_DDR_SHIFT);
+
+ if (ddr_sel)
+ clk = ltq_get_system_clock() / 3;
+@@ -83,7 +88,7 @@ unsigned long ltq_get_cpu_clock(void)
+ u32 cpu_sel;
+ unsigned long clk;
+
+- cpu_sel = ltq_cgu_sys_readl(1, CGU_SYS_CPU_SEL);
++ cpu_sel = ltq_cgu_sys_readl(CGU_SYS_CPU_MASK, CGU_SYS_CPU_SHIFT);
+
+ if (cpu_sel)
+ clk = ltq_get_io_region_clock();
+@@ -98,7 +103,7 @@ unsigned long ltq_get_bus_clock(void)
+ u32 fpi_sel;
+ unsigned long clk;
+
+- fpi_sel = ltq_cgu_sys_readl(1, CGU_SYS_FPI_SEL);
++ fpi_sel = ltq_cgu_sys_readl(CGU_SYS_FPI_MASK, CGU_SYS_FPI_SHIFT);
+
+ if (fpi_sel)
+ clk = ltq_get_io_region_clock() / 2;
diff --git a/package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Arcadyan-ARV4519.patch b/package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Arcadyan-ARV4519.patch
deleted file mode 100644
index 51738e4..0000000
--- a/package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Arcadyan-ARV4519.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From 9f915cf9550a6234adecaf3031c2b279835e14af Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka at openwrt.org>
-Date: Sat, 2 Mar 2013 23:34:00 +0100
-Subject: MIPS: add board support for Arcadyan ARV4519
-
-Signed-off-by: Luka Perkov <luka at openwrt.org>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- /dev/null
-+++ b/board/arcadyan/arv4519pw/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/arcadyan/arv4519pw/arv4519pw.c
-@@ -0,0 +1,51 @@
-+/*
-+ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+int board_early_init_f(void)
-+{
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Atheros ar8216 switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_NONE },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device ar8216_dev = {
-+ .name = "ar8216",
-+ .cpu_port = 0,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ return switch_device_register(&ar8216_dev);
-+}
---- /dev/null
-+++ b/board/arcadyan/arv4519pw/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/arcadyan/arv4519pw/ddr_settings.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * This file has been generated with lantiq_ram_extract_magic.awk script.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x102
-+#define MC_DC09_VALUE 0x70A
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xC02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x131
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x301
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA04
-+#define MC_DC21_VALUE 0x1700
-+#define MC_DC22_VALUE 0x1717
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x5A
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x4E20
-+#define MC_DC30_VALUE 0x8235
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -502,6 +502,9 @@ Active mips mips32 au1x0
- Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas at corelatus.se>
- Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas at corelatus.se>
- Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
-+Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---- /dev/null
-+++ b/include/configs/arv4519pw.h
-@@ -0,0 +1,67 @@
-+/*
-+ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "ARV4519PW"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Arcadyan ARV4519PW"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_AR8216
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Brnboot loadable image */
-+#if defined(CONFIG_SYS_BOOT_BRN)
-+#define CONFIG_SYS_TEXT_BASE 0x80002000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_DISABLE_CACHE
-+#define CONFIG_ENV_OVERWRITE 1
-+#endif
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0040000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0026-no_extern_inline.patch b/package/boot/uboot-lantiq/patches/0026-no_extern_inline.patch
new file mode 100644
index 0000000..70216f2
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0026-no_extern_inline.patch
@@ -0,0 +1,97 @@
+From b11c5d1dc29e81326d1215011d19377737082aeb Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+Date: Wed, 1 Jul 2015 16:36:43 +0200
+Subject: [PATCH] MIPS: change 'extern inline' to 'static inline'
+
+The kernel changed it a long time ago. Also this is now broken
+on gcc-5.x.
+
+Reported-by: Andy Kennedy <andy.kennedy at adtran.com>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+---
+ arch/mips/include/asm/io.h | 12 ++++++------
+ arch/mips/include/asm/system.h | 6 +++---
+ 2 files changed, 9 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/include/asm/io.h
++++ b/arch/mips/include/asm/io.h
+@@ -118,7 +118,7 @@ static inline void set_io_port_base(unsi
+ * Change virtual addresses to physical addresses and vv.
+ * These are trivial on the 1:1 Linux/MIPS mapping
+ */
+-extern inline phys_addr_t virt_to_phys(volatile void * address)
++static inline phys_addr_t virt_to_phys(volatile void * address)
+ {
+ #ifndef CONFIG_64BIT
+ return CPHYSADDR(address);
+@@ -127,7 +127,7 @@ extern inline phys_addr_t virt_to_phys(v
+ #endif
+ }
+
+-extern inline void * phys_to_virt(unsigned long address)
++static inline void * phys_to_virt(unsigned long address)
+ {
+ #ifndef CONFIG_64BIT
+ return (void *)KSEG0ADDR(address);
+@@ -139,7 +139,7 @@ extern inline void * phys_to_virt(unsign
+ /*
+ * IO bus memory addresses are also 1:1 with the physical address
+ */
+-extern inline unsigned long virt_to_bus(volatile void * address)
++static inline unsigned long virt_to_bus(volatile void * address)
+ {
+ #ifndef CONFIG_64BIT
+ return CPHYSADDR(address);
+@@ -148,7 +148,7 @@ extern inline unsigned long virt_to_bus(
+ #endif
+ }
+
+-extern inline void * bus_to_virt(unsigned long address)
++static inline void * bus_to_virt(unsigned long address)
+ {
+ #ifndef CONFIG_64BIT
+ return (void *)KSEG0ADDR(address);
+@@ -166,12 +166,12 @@ extern unsigned long isa_slot_offset;
+ extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+ #if 0
+-extern inline void *ioremap(unsigned long offset, unsigned long size)
++static inline void *ioremap(unsigned long offset, unsigned long size)
+ {
+ return __ioremap(offset, size, _CACHE_UNCACHED);
+ }
+
+-extern inline void *ioremap_nocache(unsigned long offset, unsigned long size)
++static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+ {
+ return __ioremap(offset, size, _CACHE_UNCACHED);
+ }
+--- a/arch/mips/include/asm/system.h
++++ b/arch/mips/include/asm/system.h
+@@ -23,7 +23,7 @@
+ #include <linux/kernel.h>
+ #endif
+
+-extern __inline__ void
++static __inline__ void
+ __sti(void)
+ {
+ __asm__ __volatile__(
+@@ -47,7 +47,7 @@ __sti(void)
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+-extern __inline__ void
++static __inline__ void
+ __cli(void)
+ {
+ __asm__ __volatile__(
+@@ -208,7 +208,7 @@ do { \
+ * For 32 and 64 bit operands we can take advantage of ll and sc.
+ * FIXME: This doesn't work for R3000 machines.
+ */
+-extern __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
++static __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
+ {
+ #ifdef CONFIG_CPU_HAS_LLSC
+ unsigned long dummy;
diff --git a/package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch b/package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch
deleted file mode 100644
index 21e6a2c..0000000
--- a/package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From 54a31b334162e8dc2ea891057ddeab42978db8b3 Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka at openwrt.org>
-Date: Sat, 2 Mar 2013 23:34:00 +0100
-Subject: MIPS: add board support for Arcadyan ARV7518
-
-Signed-off-by: Luka Perkov <luka at openwrt.org>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- /dev/null
-+++ b/board/arcadyan/arv7518pw/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/arcadyan/arv7518pw/arv7518pw.c
-@@ -0,0 +1,51 @@
-+/*
-+ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+int board_early_init_f(void)
-+{
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Atheros ar8216 switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_NONE },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device ar8216_dev = {
-+ .name = "ar8216",
-+ .cpu_port = 0,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ return switch_device_register(&ar8216_dev);
-+}
---- /dev/null
-+++ b/board/arcadyan/arv7518pw/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/arcadyan/arv7518pw/ddr_settings.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * This file has been generated with lantiq_ram_extract_magic.awk script.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x102
-+#define MC_DC09_VALUE 0x70A
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xC02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x134
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x301
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA03
-+#define MC_DC21_VALUE 0x1400
-+#define MC_DC22_VALUE 0x1414
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x5B
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x4E20
-+#define MC_DC30_VALUE 0x8235
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -505,6 +505,9 @@ Active mips mips32 au1x0
- Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---- /dev/null
-+++ b/include/configs/arv7518pw.h
-@@ -0,0 +1,67 @@
-+/*
-+ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "ARV7518PW"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Arcadyan ARV7518PW"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_AR8216
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Brnboot loadable image */
-+#if defined(CONFIG_SYS_BOOT_BRN)
-+#define CONFIG_SYS_TEXT_BASE 0x80002000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_DISABLE_CACHE
-+#define CONFIG_ENV_OVERWRITE 1
-+#endif
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0040000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0027-no_weak_alias.patch b/package/boot/uboot-lantiq/patches/0027-no_weak_alias.patch
new file mode 100644
index 0000000..da519a5
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0027-no_weak_alias.patch
@@ -0,0 +1,26 @@
+From 3422299dc28fa8257677d03cc1253e3c9bf17e9f Mon Sep 17 00:00:00 2001
+From: Jeroen Hofstee <jeroen at myspectrum.nl>
+Date: Thu, 26 Jun 2014 20:18:31 +0200
+Subject: [PATCH] common: main.c: make show_boot_progress __weak
+
+This not only looks a bit better it also prevents a
+warning with W=1 (no previous prototype).
+
+Signed-off-by: Jeroen Hofstee <jeroen at myspectrum.nl>
+Acked-by: Simon Glass <sjg at chromium.org>
+---
+ common/main.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/common/main.c
++++ b/common/main.c
+@@ -27,8 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ /*
+ * Board-specific Platform code can reimplement show_boot_progress () if needed
+ */
+-void inline __show_boot_progress (int val) {}
+-void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
++__weak void show_boot_progress(int val) {}
+
+ #define MAX_DELAY_STOP_STR 32
+
diff --git a/package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-AudioCodes-MP-252.patch b/package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-AudioCodes-MP-252.patch
deleted file mode 100644
index 00820f8..0000000
--- a/package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-AudioCodes-MP-252.patch
+++ /dev/null
@@ -1,248 +0,0 @@
-From 4bacfc80eae768be45f9ddf7588ec55281354648 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel.golle at gmail.com>
-Date: Fri, 8 Mar 2013 13:29:04 +0200
-Subject: MIPS: add board support for AudioCodes MP-252
-
-Signed-off-by: Daniel Golle <dgolle at allnet.de>
-
---- /dev/null
-+++ b/board/audiocodes/acmp252/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/audiocodes/acmp252/acmp252.c
-@@ -0,0 +1,66 @@
-+/*
-+ * Copyright (C) 2013 Daniel Golle <daniel.golle at gmail.com>
-+ * Copyright (C) 2011 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+static void gpio_init(void)
-+{
-+ /* Activate reset line of ADM6996I switch */
-+ gpio_direction_output(19, 0);
-+}
-+
-+int board_early_init_f(void)
-+{
-+ gpio_init();
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Lantiq ADM6996I switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device adm6996i_dev = {
-+ .name = "adm6996i",
-+ .cpu_port = 5,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ /* Deactivate reset line of ADM6996I switch */
-+ gpio_set_value(19, 1);
-+
-+ /* ADM6996I needs some time to come out of reset */
-+ __udelay(50000);
-+
-+ return switch_device_register(&adm6996i_dev);
-+}
---- /dev/null
-+++ b/board/audiocodes/acmp252/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/audiocodes/acmp252/ddr_settings.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * This file has been generated with lantiq_ram_extract_magic.awk script.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x403
-+#define MC_DC08_VALUE 0x103
-+#define MC_DC09_VALUE 0x80B
-+#define MC_DC10_VALUE 0x304
-+#define MC_DC11_VALUE 0xD03
-+#define MC_DC12_VALUE 0x2C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x13C
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x402
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA03
-+#define MC_DC21_VALUE 0x1700
-+#define MC_DC22_VALUE 0x1717
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x5C
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x2D93
-+#define MC_DC30_VALUE 0x8300
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -508,6 +508,8 @@ Active mips mips32 danub
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
-+Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---- /dev/null
-+++ b/include/configs/acmp252.h
-@@ -0,0 +1,60 @@
-+/*
-+ * Copyright (C) 2013 Daniel Golle <daniel.golle at gmail.com>
-+ * Copyright (C) 2011 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "ACMP252"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "AudioCodes MP-252"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_ADM6996I
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (256 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0040000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0028-add-gcc5-support.patch b/package/boot/uboot-lantiq/patches/0028-add-gcc5-support.patch
new file mode 100644
index 0000000..3ae76a7
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0028-add-gcc5-support.patch
@@ -0,0 +1,87 @@
+From 478b02f1a7043b673565075ea5016376f3293b23 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede at redhat.com>
+Date: Sat, 7 Feb 2015 22:52:40 +0100
+Subject: [PATCH] Add linux/compiler-gcc5.h to fix builds with gcc5
+
+Add linux/compiler-gcc5/h from the kernel sources at:
+
+commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
+Author: Steven Noonan <steven at uplinklabs.net>
+Date: Sat Oct 25 15:09:42 2014 -0700
+
+ compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles
+
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 65 insertions(+)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+--- /dev/null
++++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,65 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used __attribute__((__used__))
++#define __must_check __attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++ to them will be unlikely. This means a lot of manual unlikely()s
++ are unnecessary now for any paths leading to the usual suspects
++ like BUG(), printk(), panic() etc. [but let's keep them for now for
++ older compilers]
++
++ Early snapshots of gcc 4.3 don't support this and we can't detect this
++ in the preprocessor, but we can live with this because they're unreleased.
++ Maketime probing would be overkill here.
++
++ gcc also has a __attribute__((__hot__)) to move hot functions into
++ a special section, but I don't see any sense in this right now in
++ the kernel context */
++#define __cold __attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable. This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased. Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone __attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
diff --git a/package/boot/uboot-lantiq/patches/0029-MIPS-add-board-support-for-AVM-FritzBox-3370.patch b/package/boot/uboot-lantiq/patches/0029-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
deleted file mode 100644
index 77014e4..0000000
--- a/package/boot/uboot-lantiq/patches/0029-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
+++ /dev/null
@@ -1,354 +0,0 @@
-From 37a95ae4ba75407a26862ece6f48fa68aa6c5c78 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-Date: Sat, 2 Mar 2013 23:34:00 +0100
-Subject: MIPS: add board support for AVM FritzBox 3370
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- /dev/null
-+++ b/board/avm/fb3370/Makefile
-@@ -0,0 +1,28 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/avm/fb3370/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/avm/fb3370/ddr_settings.h
-@@ -0,0 +1,69 @@
-+/*
-+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_CCR00_VALUE 0x101
-+#define MC_CCR01_VALUE 0x1000100
-+#define MC_CCR02_VALUE 0x1010000
-+#define MC_CCR03_VALUE 0x101
-+#define MC_CCR04_VALUE 0x1000000
-+#define MC_CCR05_VALUE 0x1000101
-+#define MC_CCR06_VALUE 0x1000100
-+#define MC_CCR07_VALUE 0x1010000
-+#define MC_CCR08_VALUE 0x1000101
-+#define MC_CCR09_VALUE 0x0
-+#define MC_CCR10_VALUE 0x2000100
-+#define MC_CCR11_VALUE 0x2000300
-+#define MC_CCR12_VALUE 0x30000
-+#define MC_CCR13_VALUE 0x202
-+#define MC_CCR14_VALUE 0x7080A0F
-+#define MC_CCR15_VALUE 0x2040F
-+#define MC_CCR16_VALUE 0x40000
-+#define MC_CCR17_VALUE 0x70102
-+#define MC_CCR18_VALUE 0x4020002
-+#define MC_CCR19_VALUE 0x30302
-+#define MC_CCR20_VALUE 0x8000700
-+#define MC_CCR21_VALUE 0x40F020A
-+#define MC_CCR22_VALUE 0x0
-+#define MC_CCR23_VALUE 0xC020000
-+#define MC_CCR24_VALUE 0x4401B04
-+#define MC_CCR25_VALUE 0x0
-+#define MC_CCR26_VALUE 0x0
-+#define MC_CCR27_VALUE 0x6420000
-+#define MC_CCR28_VALUE 0x0
-+#define MC_CCR29_VALUE 0x0
-+#define MC_CCR30_VALUE 0x798
-+#define MC_CCR31_VALUE 0x0
-+#define MC_CCR32_VALUE 0x0
-+#define MC_CCR33_VALUE 0x650000
-+#define MC_CCR34_VALUE 0x200C8
-+#define MC_CCR35_VALUE 0x1D445D
-+#define MC_CCR36_VALUE 0xC8
-+#define MC_CCR37_VALUE 0xC351
-+#define MC_CCR38_VALUE 0x0
-+#define MC_CCR39_VALUE 0x141F04
-+#define MC_CCR40_VALUE 0x142704
-+#define MC_CCR41_VALUE 0x141B42
-+#define MC_CCR42_VALUE 0x141B42
-+#define MC_CCR43_VALUE 0x566504
-+#define MC_CCR44_VALUE 0x566504
-+#define MC_CCR45_VALUE 0x565F17
-+#define MC_CCR46_VALUE 0x565F17
-+#define MC_CCR47_VALUE 0x0
-+#define MC_CCR48_VALUE 0x0
-+#define MC_CCR49_VALUE 0x0
-+#define MC_CCR50_VALUE 0x0
-+#define MC_CCR51_VALUE 0x0
-+#define MC_CCR52_VALUE 0x133
-+#define MC_CCR53_VALUE 0xF3014B27
-+#define MC_CCR54_VALUE 0xF3014B27
-+#define MC_CCR55_VALUE 0xF3014B27
-+#define MC_CCR56_VALUE 0xF3014B27
-+#define MC_CCR57_VALUE 0x7800301
-+#define MC_CCR58_VALUE 0x7800301
-+#define MC_CCR59_VALUE 0x7800301
-+#define MC_CCR60_VALUE 0x7800301
-+#define MC_CCR61_VALUE 0x4
---- /dev/null
-+++ b/board/avm/fb3370/fb3370.c
-@@ -0,0 +1,138 @@
-+/*
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <spi.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/chipid.h>
-+#include <asm/lantiq/cpu.h>
-+#include <asm/arch/gphy.h>
-+
-+#if defined(CONFIG_SPL_BUILD)
-+#define do_gpio_init 1
-+#define do_pll_init 1
-+#define do_dcdc_init 0
-+#elif defined(CONFIG_SYS_BOOT_RAM)
-+#define do_gpio_init 1
-+#define do_pll_init 0
-+#define do_dcdc_init 1
-+#elif defined(CONFIG_SYS_BOOT_NOR)
-+#define do_gpio_init 1
-+#define do_pll_init 1
-+#define do_dcdc_init 1
-+#else
-+#define do_gpio_init 0
-+#define do_pll_init 0
-+#define do_dcdc_init 1
-+#endif
-+
-+static void gpio_init(void)
-+{
-+ /* SPI CS 0.4 to serial flash */
-+ gpio_direction_output(10, 1);
-+
-+ /* EBU.FL_CS1 as output for NAND CE */
-+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* EBU.FL_A23 as output for NAND CLE */
-+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* EBU.FL_A24 as output for NAND ALE */
-+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* GPIO 3.0 as input for NAND Ready Busy */
-+ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
-+ /* GPIO 3.1 as output for NAND Read */
-+ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+}
-+
-+int board_early_init_f(void)
-+{
-+ if (do_gpio_init)
-+ gpio_init();
-+
-+ if (do_pll_init)
-+ ltq_pll_init();
-+
-+ if (do_dcdc_init)
-+ ltq_dcdc_init(0x7F);
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
-+ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
-+ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
-+ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
-+ /* GMAC3: unused */
-+ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
-+ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
-+ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
-+ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
-+ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t * bis)
-+{
-+ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
-+ const ulong fw_addr = 0x80FF0000;
-+
-+ ltq_gphy_phy11g_a1x_load(fw_addr);
-+
-+ ltq_cgu_gphy_clk_src(clk);
-+
-+ ltq_rcu_gphy_boot(0, fw_addr);
-+ ltq_rcu_gphy_boot(1, fw_addr);
-+
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-+{
-+ if (bus)
-+ return 0;
-+
-+ if (cs == 4)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+void spi_cs_activate(struct spi_slave *slave)
-+{
-+ switch (slave->cs) {
-+ case 4:
-+ gpio_set_value(10, 0);
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+void spi_cs_deactivate(struct spi_slave *slave)
-+{
-+ switch (slave->cs) {
-+ case 4:
-+ gpio_set_value(10, 1);
-+ break;
-+ default:
-+ break;
-+ }
-+}
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -517,6 +517,9 @@ Active mips mips32 incai
- Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd at denx.de>
-+Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---- /dev/null
-+++ b/include/configs/fb3370.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "FB3370"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "AVM FritzBox 3370"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
-+#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29LV620 serial flash */
-+
-+#define CONFIG_LTQ_SUPPORT_NAND_FLASH
-+
-+#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
-+#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
-+#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
-+
-+#define CONFIG_SPL_SPI_BUS 0
-+#define CONFIG_SPL_SPI_CS 4
-+#define CONFIG_SPL_SPI_MAX_HZ 25000000
-+#define CONFIG_SPL_SPI_MODE 0
-+
-+#define CONFIG_SYS_DRAM_PROBE
-+
-+/* Environment */
-+#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
-+#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
-+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
-+#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
-+
-+#if defined(CONFIG_SYS_BOOT_SFSPL)
-+#define CONFIG_ENV_IS_IN_SPI_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+#if defined(CONFIG_SYS_BOOT_EVA)
-+#define CONFIG_SYS_TEXT_BASE 0x80100000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#endif
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY VRX200 */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_SF \
-+ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_SF
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0030-MIPS-add-board-support-for-Gigaset-SX76X.patch b/package/boot/uboot-lantiq/patches/0030-MIPS-add-board-support-for-Gigaset-SX76X.patch
deleted file mode 100644
index 96737fa..0000000
--- a/package/boot/uboot-lantiq/patches/0030-MIPS-add-board-support-for-Gigaset-SX76X.patch
+++ /dev/null
@@ -1,247 +0,0 @@
-From 9e9dec563e4d061e7b34d2d59a89eb05c60f43a7 Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka at openwrt.org>
-Date: Sat, 2 Mar 2013 23:34:00 +0100
-Subject: MIPS: add board support for Gigaset SX76X
-
-Signed-off-by: Luka Perkov <luka at openwrt.org>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- /dev/null
-+++ b/board/gigaset/sx76x/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/gigaset/sx76x/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/gigaset/sx76x/ddr_settings.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * This file has been generated with lantiq_ram_extract_magic.awk script.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x202
-+#define MC_DC09_VALUE 0x70A
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xC02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0xF3E
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x300
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA04
-+#define MC_DC21_VALUE 0xF00
-+#define MC_DC22_VALUE 0xF0F
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x63
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x100
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x514
-+#define MC_DC29_VALUE 0x2D89
-+#define MC_DC30_VALUE 0x8300
-+#define MC_DC31_VALUE 0x2002
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- /dev/null
-+++ b/board/gigaset/sx76x/sx76x.c
-@@ -0,0 +1,65 @@
-+/*
-+ * Copyright (C) 2011 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+static void gpio_init(void)
-+{
-+ /* Activate reset line of ADM6996I switch */
-+ gpio_direction_output(19, 0);
-+}
-+
-+int board_early_init_f(void)
-+{
-+ gpio_init();
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Lantiq ADM6996I switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device adm6996i_dev = {
-+ .name = "adm6996i",
-+ .cpu_port = 5,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ /* Deactivate reset line of ADM6996I switch */
-+ gpio_set_value(19, 1);
-+
-+ /* ADM6996I needs some time to come out of reset */
-+ __udelay(50000);
-+
-+ return switch_device_register(&adm6996i_dev);
-+}
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -510,6 +510,8 @@ Active mips mips32 danub
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
- Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
-+Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube gigaset sx76x gigasx76x_ram sx76x:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---- /dev/null
-+++ b/include/configs/sx76x.h
-@@ -0,0 +1,59 @@
-+/*
-+ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "GIGASX76X"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Gigaset sx76x"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_ADM6996I
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (256 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0040000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch b/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch
deleted file mode 100644
index a1c0bde..0000000
--- a/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch
+++ /dev/null
@@ -1,301 +0,0 @@
-From 3f7be04a148d23cdb5fd320e0e2923983f8bd1f4 Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka at openwrt.org>
-Date: Tue, 6 Aug 2013 22:51:00 +0200
-Subject: MIPS: add board support for ZyXEL P-2812HNU-Fx
-
-Signed-off-by: Luka Perkov <luka at openwrt.org>
-
---- /dev/null
-+++ b/board/zyxel/p2812hnufx/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/zyxel/p2812hnufx/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/zyxel/p2812hnufx/ddr_settings.h
-@@ -0,0 +1,70 @@
-+/*
-+ * Copyright (C) 2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * The values have been extracted from original ZyXEL U-Boot.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_CCR00_VALUE 0x101
-+#define MC_CCR01_VALUE 0x1000100
-+#define MC_CCR02_VALUE 0x1010000
-+#define MC_CCR03_VALUE 0x101
-+#define MC_CCR04_VALUE 0x1000000
-+#define MC_CCR05_VALUE 0x1000101
-+#define MC_CCR06_VALUE 0x1000100
-+#define MC_CCR07_VALUE 0x1010000
-+#define MC_CCR08_VALUE 0x1000101
-+#define MC_CCR09_VALUE 0x0
-+#define MC_CCR10_VALUE 0x2000100
-+#define MC_CCR11_VALUE 0x2000300
-+#define MC_CCR12_VALUE 0x30000
-+#define MC_CCR13_VALUE 0x202
-+#define MC_CCR14_VALUE 0x7080A0F
-+#define MC_CCR15_VALUE 0x2040F
-+#define MC_CCR16_VALUE 0x40000
-+#define MC_CCR17_VALUE 0x70102
-+#define MC_CCR18_VALUE 0x4020002
-+#define MC_CCR19_VALUE 0x30302
-+#define MC_CCR20_VALUE 0x8000700
-+#define MC_CCR21_VALUE 0x40F020A
-+#define MC_CCR22_VALUE 0x0
-+#define MC_CCR23_VALUE 0xC020000
-+#define MC_CCR24_VALUE 0x4401B04
-+#define MC_CCR25_VALUE 0x0
-+#define MC_CCR26_VALUE 0x0
-+#define MC_CCR27_VALUE 0x6420000
-+#define MC_CCR28_VALUE 0x0
-+#define MC_CCR29_VALUE 0x0
-+#define MC_CCR30_VALUE 0x798
-+#define MC_CCR31_VALUE 0x0
-+#define MC_CCR32_VALUE 0x0
-+#define MC_CCR33_VALUE 0x650000
-+#define MC_CCR34_VALUE 0x200C8
-+#define MC_CCR35_VALUE 0x1D445D
-+#define MC_CCR36_VALUE 0xC8
-+#define MC_CCR37_VALUE 0xC351
-+#define MC_CCR38_VALUE 0x0
-+#define MC_CCR39_VALUE 0x141F04
-+#define MC_CCR40_VALUE 0x142704
-+#define MC_CCR41_VALUE 0x141B42
-+#define MC_CCR42_VALUE 0x141B42
-+#define MC_CCR43_VALUE 0x566504
-+#define MC_CCR44_VALUE 0x566504
-+#define MC_CCR45_VALUE 0x565F17
-+#define MC_CCR46_VALUE 0x565F17
-+#define MC_CCR47_VALUE 0x0
-+#define MC_CCR48_VALUE 0x0
-+#define MC_CCR49_VALUE 0x0
-+#define MC_CCR50_VALUE 0x0
-+#define MC_CCR51_VALUE 0x0
-+#define MC_CCR52_VALUE 0x133
-+#define MC_CCR53_VALUE 0xF3014B27
-+#define MC_CCR54_VALUE 0xF3014B27
-+#define MC_CCR55_VALUE 0xF3014B27
-+#define MC_CCR56_VALUE 0xF3014B27
-+#define MC_CCR57_VALUE 0x7800301
-+#define MC_CCR58_VALUE 0x7800301
-+#define MC_CCR59_VALUE 0x7800301
-+#define MC_CCR60_VALUE 0x7800301
-+#define MC_CCR61_VALUE 0x4
---- /dev/null
-+++ b/board/zyxel/p2812hnufx/p2812hnufx.c
-@@ -0,0 +1,97 @@
-+/*
-+ * Copyright (C) 2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/chipid.h>
-+#include <asm/lantiq/cpu.h>
-+#include <asm/arch/gphy.h>
-+
-+#if defined(CONFIG_SPL_BUILD)
-+#define do_gpio_init 1
-+#define do_pll_init 1
-+#define do_dcdc_init 0
-+#elif defined(CONFIG_SYS_BOOT_RAM)
-+#define do_gpio_init 1
-+#define do_pll_init 0
-+#define do_dcdc_init 1
-+#else
-+#define do_gpio_init 0
-+#define do_pll_init 0
-+#define do_dcdc_init 1
-+#endif
-+
-+static void gpio_init(void)
-+{
-+ /* EBU.FL_CS1 as output for NAND CE */
-+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* EBU.FL_A23 as output for NAND CLE */
-+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* EBU.FL_A24 as output for NAND ALE */
-+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* GPIO 3.0 as input for NAND Ready Busy */
-+ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
-+ /* GPIO 3.1 as output for NAND Read */
-+ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+}
-+
-+int board_early_init_f(void)
-+{
-+ if (do_gpio_init)
-+ gpio_init();
-+
-+ if (do_pll_init)
-+ ltq_pll_init();
-+
-+ if (do_dcdc_init)
-+ ltq_dcdc_init(0x7F);
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
-+ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
-+ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
-+ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
-+ /* GMAC3: unused */
-+ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
-+ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
-+ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
-+ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
-+ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t * bis)
-+{
-+ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
-+ const ulong fw_addr = 0x80FF0000;
-+
-+ ltq_gphy_phy11g_a1x_load(fw_addr);
-+
-+ ltq_cgu_gphy_clk_src(clk);
-+
-+ ltq_rcu_gphy_boot(0, fw_addr);
-+ ltq_rcu_gphy_boot(1, fw_addr);
-+
-+ return ltq_eth_initialize(ð_board_config);
-+}
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -527,6 +527,8 @@ Active mips mips32 vrx20
- Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+Active mips mips32 vrx200 zyxel p2812hnufx p2812hnufx_nandspl p2812hnufx:SYS_BOOT_NANDSPL Luka Perkov <luka at openwrt.org>
-+Active mips mips32 vrx200 zyxel p2812hnufx p2812hnufx_ram p2812hnufx:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
- Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
- Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
- Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot at andestech.com>
---- /dev/null
-+++ b/include/configs/p2812hnufx.h
-@@ -0,0 +1,67 @@
-+/*
-+ * Copyright (C) 2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "P-2812HNU-Fx"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "ZyXEL P-2812HNU-Fx"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NAND_FLASH /* Have a K9F1G08U0D NAND flash */
-+
-+#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
-+#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
-+#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
-+
-+#define CONFIG_SYS_NAND_PAGE_COUNT 64
-+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-+#define CONFIG_SYS_NAND_OOBSIZE 64
-+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
-+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000
-+
-+#define CONFIG_SYS_DRAM_PROBE
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NANDSPL)
-+#define CONFIG_ENV_IS_IN_NAND
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (256 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY VRX200 */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NAND \
-+ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NAND
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0037-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch b/package/boot/uboot-lantiq/patches/0037-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch
deleted file mode 100644
index 676ef12..0000000
--- a/package/boot/uboot-lantiq/patches/0037-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From fbdbf2ddf2b34d675d53de679c179788b0604c1a Mon Sep 17 00:00:00 2001
-From: Oliver Muth <dr.o.muth at gmx.de>
-Date: Sat, 12 Oct 2013 16:49:53 +0200
-Subject: MIPS: add board support for Arcadyan ARV752DPW
-
-Signed-off-by: Oliver Muth <dr.o.muth at gmx.de>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- /dev/null
-+++ b/board/arcadyan/arv752dpw/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/arcadyan/arv752dpw/arv752dpw.c
-@@ -0,0 +1,51 @@
-+/*
-+ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
-+ * Copyright (C) 2013 Oliver Muth <dr.o.muth at gmx.de>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+int board_early_init_f(void)
-+{
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Realtek rtl8306 switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+static struct switch_device rtl8306_dev = {
-+ .name = "rtl8306",
-+ .cpu_port = 5,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ return switch_device_register(&rtl8306_dev);
-+}
---- /dev/null
-+++ b/board/arcadyan/arv752dpw/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/arcadyan/arv752dpw/ddr_settings.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * This file has been generated with lantiq_ram_extract_magic.awk script.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x102
-+#define MC_DC09_VALUE 0x70A
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xC02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x134
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x301
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA03
-+#define MC_DC21_VALUE 0x1400
-+#define MC_DC22_VALUE 0x1414
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x5B
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x4E20
-+#define MC_DC30_VALUE 0x8235
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -518,6 +518,9 @@ Active mips mips32 danub
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv752dpw arv752dpw_brn arv752dpw:SYS_BOOT_BRN -
-+Active mips mips32 danube arcadyan arv752dpw arv752dpw_nor arv752dpw:SYS_BOOT_NOR -
-+Active mips mips32 danube arcadyan arv752dpw arv752dpw_ram arv752dpw:SYS_BOOT_RAM -
- Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
- Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
- Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
---- /dev/null
-+++ b/include/configs/arv752dpw.h
-@@ -0,0 +1,67 @@
-+/*
-+ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "ARV752DPW"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Arcadyan ARV752DPW"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_RTL8206
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Brnboot loadable image */
-+#if defined(CONFIG_SYS_BOOT_BRN)
-+#define CONFIG_SYS_TEXT_BASE 0x80002000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_DISABLE_CACHE
-+#define CONFIG_ENV_OVERWRITE 1
-+#endif
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0040000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0038-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch b/package/boot/uboot-lantiq/patches/0038-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch
deleted file mode 100644
index 2cf0e95..0000000
--- a/package/boot/uboot-lantiq/patches/0038-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch
+++ /dev/null
@@ -1,244 +0,0 @@
-From 09f411b4d10f10a62f147264121bb853b4649c3e Mon Sep 17 00:00:00 2001
-From: Oliver Muth <dr.o.muth at gmx.de>
-Date: Sat, 12 Oct 2013 16:49:53 +0200
-Subject: MIPS: add board support for Arcadyan ARV752DPW22
-
-Signed-off-by: Oliver Muth <dr.o.muth at gmx.de>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- /dev/null
-+++ b/board/arcadyan/arv752dpw22/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/arcadyan/arv752dpw22/arv752dpw22.c
-@@ -0,0 +1,52 @@
-+/*
-+ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
-+ * Copyright (C) 2013 Oliver Muth <dr.o.muth at gmx.de>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+int board_early_init_f(void)
-+{
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Atheros ar8216 switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_MII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device ar8216_dev = {
-+ .name = "ar8216",
-+ .cpu_port = 0,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ return switch_device_register(&ar8216_dev);
-+}
---- /dev/null
-+++ b/board/arcadyan/arv752dpw22/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/arcadyan/arv752dpw22/ddr_settings.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * This file has been generated with lantiq_ram_extract_magic.awk script.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x102
-+#define MC_DC09_VALUE 0x70A
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xC02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x134
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x301
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA03
-+#define MC_DC21_VALUE 0x1400
-+#define MC_DC22_VALUE 0x1414
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x5B
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x4E20
-+#define MC_DC30_VALUE 0x8235
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -521,6 +521,9 @@ Active mips mips32 danub
- Active mips mips32 danube arcadyan arv752dpw arv752dpw_brn arv752dpw:SYS_BOOT_BRN -
- Active mips mips32 danube arcadyan arv752dpw arv752dpw_nor arv752dpw:SYS_BOOT_NOR -
- Active mips mips32 danube arcadyan arv752dpw arv752dpw_ram arv752dpw:SYS_BOOT_RAM -
-+Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_brn arv752dpw22:SYS_BOOT_BRN -
-+Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_nor arv752dpw22:SYS_BOOT_NOR -
-+Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_ram arv752dpw22:SYS_BOOT_RAM -
- Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
- Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
- Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
---- /dev/null
-+++ b/include/configs/arv752dpw22.h
-@@ -0,0 +1,68 @@
-+/*
-+ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "ARV752DPW22"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Arcadyan ARV752DPW22"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_AR8216
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Burnboot loadable image */
-+#if defined(CONFIG_SYS_BOOT_BRN)
-+#define CONFIG_SYS_TEXT_BASE 0x80002000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_DISABLE_CACHE
-+#define CONFIG_ENV_OVERWRITE 1
-+#endif
-+
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0040000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0039-MIPS-add-board-support-for-Arcadyan-ARV7510.patch b/package/boot/uboot-lantiq/patches/0039-MIPS-add-board-support-for-Arcadyan-ARV7510.patch
deleted file mode 100644
index 76f8955..0000000
--- a/package/boot/uboot-lantiq/patches/0039-MIPS-add-board-support-for-Arcadyan-ARV7510.patch
+++ /dev/null
@@ -1,269 +0,0 @@
-From ba27086a5174130d138d645c2f4a49b08c3f2386 Mon Sep 17 00:00:00 2001
-From: Matti Laakso <malaakso at elisanet.fi>
-Date: Sat, 2 Mar 2013 23:34:00 +0100
-Subject: MIPS: add board support for Arcadyan ARV7510
-
-Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- /dev/null
-+++ b/board/arcadyan/arv7510pw/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/arcadyan/arv7510pw/arv7510pw.c
-@@ -0,0 +1,72 @@
-+/*
-+ * Copyright (C) 2013 Matti Laakso <malaakso at elisanet.fi>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+#include <asm/lantiq/cpu.h>
-+
-+static void gpio_init(void)
-+{
-+ /* Initialize SSIO GPIOs */
-+ gpio_set_altfunc(4, 1, 0, 1);
-+ gpio_set_altfunc(5, 1, 0, 1);
-+ gpio_set_altfunc(6, 1, 0, 1);
-+ ltq_gpio_init();
-+
-+ /* Power led on */
-+ gpio_direction_output(76, 1);
-+}
-+
-+int board_early_init_f(void)
-+{
-+ gpio_init();
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: ADM6996I */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device adm6996i_dev = {
-+ .name = "adm6996i",
-+ .cpu_port = 5,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ /* Deactivate HRST line to release reset of ADM6996I switch */
-+ ltq_reset_once(LTQ_RESET_HARD, 200000);
-+
-+ /* ADM6996I needs some time to come out of reset */
-+ __udelay(50000);
-+
-+ return switch_device_register(&adm6996i_dev);
-+}
---- /dev/null
-+++ b/board/arcadyan/arv7510pw/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/arcadyan/arv7510pw/ddr_settings.h
-@@ -0,0 +1,53 @@
-+/*
-+ * Copyright (C) 2013 Matti Laakso <malaakso at elisanet.fi>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x102
-+#define MC_DC09_VALUE 0x70A
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xC02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x120
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x301
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA04
-+#define MC_DC21_VALUE 0x1700
-+#define MC_DC22_VALUE 0x1717
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x52
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x4E20
-+#define MC_DC30_VALUE 0x8235
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -515,6 +515,9 @@ Active mips mips32 au1x0
- Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv7510pw arv7510pw_brn arv7510pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv7510pw arv7510pw_nor arv7510pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv7510pw arv7510pw_ram arv7510pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
---- /dev/null
-+++ b/include/configs/arv7510pw.h
-@@ -0,0 +1,75 @@
-+/*
-+ * Copyright (C) 2013 Matti Laakso <malaakso at elisanet.fi>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "ARV7510PW"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Arcadyan ARV7510PW"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_ADM6996I
-+
-+/* SSIO */
-+#define CONFIG_LTQ_SSIO_SHIFT_REGS
-+#define CONFIG_LTQ_SSIO_EDGE_FALLING
-+#define CONFIG_LTQ_SSIO_GPHY1_MODE 0
-+#define CONFIG_LTQ_SSIO_GPHY2_MODE 0
-+#define CONFIG_LTQ_SSIO_INIT_VALUE 0
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (256 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Brnboot loadable image */
-+#if defined(CONFIG_SYS_BOOT_BRN)
-+#define CONFIG_SYS_TEXT_BASE 0x80002000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_DISABLE_CACHE
-+#define CONFIG_ENV_OVERWRITE 1
-+#endif
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Buffered write broken in ARV7510PW */
-+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0060000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0041-MIPS-add-board-support-for-Arcadyan-ARV7510PW22.patch b/package/boot/uboot-lantiq/patches/0041-MIPS-add-board-support-for-Arcadyan-ARV7510PW22.patch
deleted file mode 100644
index f866921..0000000
--- a/package/boot/uboot-lantiq/patches/0041-MIPS-add-board-support-for-Arcadyan-ARV7510PW22.patch
+++ /dev/null
@@ -1,238 +0,0 @@
---- /dev/null
-+++ b/board/arcadyan/arv7510pw22/arv7510pw22.c
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2014 Ãlvaro Fernández Rojas <noltari at gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+int board_early_init_f(void)
-+{
-+ /* Switch on Power LED */
-+ gpio_direction_output(2, 0);
-+ gpio_set_value(2, 0);
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Atheros ar8216 switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_NONE },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device ar8216_dev = {
-+ .name = "ar8216",
-+ .cpu_port = 0,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ return switch_device_register(&ar8216_dev);
-+}
---- /dev/null
-+++ b/board/arcadyan/arv7510pw22/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/arcadyan/arv7510pw22/ddr_settings.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2014 Ãlvaro Fernández Rojas <noltari at gmail.com>
-+ *
-+ * This file has been generated with lantiq_ram_extract_magic.awk script.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x102
-+#define MC_DC09_VALUE 0x70A
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xC02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x134
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x301
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA03
-+#define MC_DC21_VALUE 0x1400
-+#define MC_DC22_VALUE 0x1414
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x5B
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x4E20
-+#define MC_DC30_VALUE 0x8235
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- /dev/null
-+++ b/board/arcadyan/arv7510pw22/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -518,6 +518,9 @@ Active mips mips32 danub
- Active mips mips32 danube arcadyan arv7510pw arv7510pw_brn arv7510pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7510pw arv7510pw_nor arv7510pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7510pw arv7510pw_ram arv7510pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
-+Active mips mips32 danube arcadyan arv7510pw22 arv7510pw22_brn arv7510pw22:SYS_BOOT_BRN Ãlvaro Fernández Rojas <noltari at gmail.com>
-+Active mips mips32 danube arcadyan arv7510pw22 arv7510pw22_nor arv7510pw22:SYS_BOOT_NOR Ãlvaro Fernández Rojas <noltari at gmail.com>
-+Active mips mips32 danube arcadyan arv7510pw22 arv7510pw22_ram arv7510pw22:SYS_BOOT_RAM Ãlvaro Fernández Rojas <noltari at gmail.com>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
- Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
---- /dev/null
-+++ b/include/configs/arv7510pw22.h
-@@ -0,0 +1,67 @@
-+/*
-+ * Copyright (C) 2014 Ãlvaro Fernández Rojas <noltari at gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "ARV7510PW22"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Arcadyan ARV7510PW22"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_AR8216
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (256 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Burnboot loadable image */
-+#if defined(CONFIG_SYS_BOOT_BRN)
-+#define CONFIG_SYS_TEXT_BASE 0x80002000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_DISABLE_CACHE
-+#define CONFIG_ENV_OVERWRITE 1
-+#endif
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0060000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0041-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch b/package/boot/uboot-lantiq/patches/0041-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch
deleted file mode 100644
index 1f89e54..0000000
--- a/package/boot/uboot-lantiq/patches/0041-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From 7e2f79bc40b572763a4a1ed69f63aa2eaa6df254 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-Date: Sun, 20 Oct 2013 19:39:17 +0200
-Subject: Makefile: prepare u-boot-lantiq-v2013.10-openwrt4
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-
---- a/Makefile
-+++ b/Makefile
-@@ -8,7 +8,7 @@
- VERSION = 2013
- PATCHLEVEL = 10
- SUBLEVEL =
--EXTRAVERSION =
-+EXTRAVERSION = -openwrt4
- ifneq "$(SUBLEVEL)" ""
- U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
- else
diff --git a/package/boot/uboot-lantiq/patches/0041-lzma-fixup.patch b/package/boot/uboot-lantiq/patches/0041-lzma-fixup.patch
deleted file mode 100644
index 5b16758..0000000
--- a/package/boot/uboot-lantiq/patches/0041-lzma-fixup.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Antonios Vamporakis <ant at area128.com>
-Date: Tue, 31 Dec 2013 01:05:42 +0100
-Subject: [PATCH] lzma: fix buffer bound check error
-
-Variable uncompressedSize references the space available, while outSizeFull is
-the actual expected uncompressed size. Using the wrong value causes LzmaDecode
-to return SZ_ERROR_INPUT_EOF. Problem was introduced in commit afca294. While
-at it add additional debug message.
-
-Signed-off-by: Antonios Vamporakis <ant at area128.com>
-CC: Kees Cook <keescook at chromium.org>
-CC: Simon Glass <sjg at chromium.org>
-CC: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-CC: Luka Perkov <luka at openwrt.org>
----
- lib/lzma/LzmaTools.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/lib/lzma/LzmaTools.c b/lib/lzma/LzmaTools.c
-index 0aec2f9..90d31cd 100644
---- a/lib/lzma/LzmaTools.c
-+++ b/lib/lzma/LzmaTools.c
-@@ -102,7 +102,7 @@ int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize,
- return SZ_ERROR_OUTPUT_EOF;
-
- /* Decompress */
-- outProcessed = *uncompressedSize;
-+ outProcessed = outSizeFull;
-
- WATCHDOG_RESET();
-
-@@ -111,6 +111,9 @@ int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize,
- inStream + LZMA_DATA_OFFSET, &compressedSize,
- inStream, LZMA_PROPS_SIZE, LZMA_FINISH_END, &state, &g_Alloc);
- *uncompressedSize = outProcessed;
-+
-+ debug("LZMA: Uncompresed ................ 0x%zx\n", outProcessed);
-+
- if (res != SZ_OK) {
- return res;
- }
---
-1.8.3.2
-
diff --git a/package/boot/uboot-lantiq/patches/0042-arx100-cgu-fixes.patch b/package/boot/uboot-lantiq/patches/0042-arx100-cgu-fixes.patch
deleted file mode 100644
index 8ca6a1e..0000000
--- a/package/boot/uboot-lantiq/patches/0042-arx100-cgu-fixes.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From patchwork Tue Jan 20 11:28:45 2015
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image
-From: Ben Mulvihill <ben.mulvihill at gmail.com>
-X-Patchwork-Id: 431024
-Message-Id: <1421753325.25187.58.camel at merveille.lan>
-To: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-Cc: OpenWrt Development List <openwrt-devel at lists.openwrt.org>
-Date: Tue, 20 Jan 2015 12:28:45 +0100
-
-On Tue, 2015-01-20 at 00:39 +0100, Ben Mulvihill wrote:
-> On Mon, 2015-01-19 at 19:21 +0100, Ben Mulvihill wrote:
-> > On Mon, 2015-01-19 at 16:47 +0100, Daniel Schwierzeck wrote:
-> > > 2015-01-19 15:44 GMT+01:00 Ben Mulvihill <ben.mulvihill at gmail.com>:
-> > > > On Mon, 2015-01-19 at 11:51 +0000, Conor O'Gorman wrote:
-> > > >> On 19/01/15 10:46, Ben Mulvihill wrote:
-> > > >> > Hello,
-> > > >> >
-> > > >> > I am trying to build uboot-lantiq for the BT Home Hub 3A (lantiq
-> > > >> > ar9), and am wondering where to initialise the cgu, in the case
-> > > >> > of a ramboot image for uart booting. Normally the cgu is initialised
-> > > >> > in lowlevel_init, but that code is bypassed in ramboot images. The
-> > > >> > result is that the board boots with the wrong cgu settings, which
-> > > >> > sends the console haywire. So far I have tried two solutions:
-> > > >>
-> > > >> Another option is to try and not change anything. The console is already
-> > > >> configured and running. The ram does need config.
-> > > >>
-> > > >> I was used to seeing the ramboot version running at half clock speed, at
-> > > >> least on danube, previous to ar9.
-> > > >>
-> > > >> Conor
-> > > >
-> > > > Hi Conor,
-> > > >
-> > > > Thanks for the reply. But with the latest uboot-lantiq, not changing
-> > > > anything means that I don't get a usable console. With an older
-> > > > version I do at least get a uboot console, but no linux console when
-> > > > I boot openwrt. Correcting the cgu settings solves both problems.
-> > > >
-> > >
-> > > could you try this?
-> > >
-> > > diff --git a/arch/mips/cpu/mips32/arx100/cgu.c
-> > > b/arch/mips/cpu/mips32/arx100/cgu.c
-> > > index 6e71ee7..e0afbda 100644
-> > > --- a/arch/mips/cpu/mips32/arx100/cgu.c
-> > > +++ b/arch/mips/cpu/mips32/arx100/cgu.c
-> > > @@ -95,15 +95,5 @@ unsigned long ltq_get_cpu_clock(void)
-> > >
-> > > unsigned long ltq_get_bus_clock(void)
-> > > {
-> > > - u32 fpi_sel;
-> > > - unsigned long clk;
-> > > -
-> > > - fpi_sel = ltq_cgu_sys_readl(1, CGU_SYS_FPI_SEL);
-> > > -
-> > > - if (fpi_sel)
-> > > - clk = ltq_get_io_region_clock() / 2;
-> > > - else
-> > > - clk = ltq_get_io_region_clock();
-> > > -
-> > > - return clk;
-> > > + return ltq_get_io_region_clock();
-> > > }
-> > >
-> > > the UART driver calculates the baudrate from the FPI bus clock, but
-> > > FPI_SEL is not available on AR9. FPI bus clock is always the same as
-> > > DDR clock, Obviously a copy&paste error from VR9 code ;)
-> > >
-> >
-> > No, even with this patch, I still don't get a working console I'm
-> > afraid. If I don't set anything explicitly, the board comes up with
-> > CGU_SYS set to 0x05, ie CGU_SYS_SYSSEL_PLL0_333_MHZ |
-> > CGU_SYS_CPUSEL_EQUAL_DDRCLK | CGU_SYS_DDRSEL_THIRD_SYSCLK.
-> > Is this a valid combination without CGU_SYS_PPESEL_250_MHZ ?
-> > I don't understand what CGU_SYS_PPESEL_250_MHZ does?
-> > The "right setting", as set by the stock uboot, is 0x80.
->
-> P.S. There also seems to be a discrepancy between the uboot and
-> linux code. I take it from what you say above that fpi clock, ddr
-> clock and io region clock are all the same. Now if the least
-> significant bit of CGU_SYS is set, then according to the uboot
-> code - function ltq_get_bus_clock() - their value is one
-> third of the system clock. But according to the linux code
-> - function ltq_ar9_fpi_hz() in arch/mips/lantiq/xway/clk.c -
-> their value in this case is equal to the system clock.
->
-> Or am I getting muddled? It's past my bedtime!
->
->
-
-Some of the bitshifting in arch/mips/cpu/mips32/arx100/cgu.c is 1
-out. A patch along these lines should fix it:
-
---- a/arch/mips/cpu/mips32/arx100/cgu.c 2015-01-20 11:57:22.000000000 +0100
-+++ b/arch/mips/cpu/mips32/arx100/cgu.c 2015-01-20 12:00:15.000000000 +0100
-@@ -10,12 +10,17 @@
- #include <asm/lantiq/clk.h>
- #include <asm/lantiq/io.h>
-
--#define CGU_SYS_DDR_SEL (1 << 0)
--#define CGU_SYS_CPU_SEL (1 << 2)
-+#define CGU_SYS_DDR_SHIFT 0
-+#define CGU_SYS_CPU_SHIFT 2
- #define CGU_SYS_SYS_SHIFT 3
-+#define CGU_SYS_FPI_SHIFT 6
-+#define CGU_SYS_PPE_SHIFT 7
-+
-+#define CGU_SYS_DDR_MASK (1 << CGU_SYS_DDR_SHIFT)
-+#define CGU_SYS_CPU_MASK (1 << CGU_SYS_CPU_SHIFT)
- #define CGU_SYS_SYS_MASK (0x3 << CGU_SYS_SYS_SHIFT)
--#define CGU_SYS_FPI_SEL (1 << 6)
--#define CGU_SYS_PPE_SEL (1 << 7)
-+#define CGU_SYS_FPI_MASK (1 << CGU_SYS_FPI_SHIFT)
-+#define CGU_SYS_PPE_MASK (1 << CGU_SYS_PPE_SHIFT)
-
- struct ltq_cgu_regs {
- u32 rsvd0;
-@@ -68,7 +73,7 @@ unsigned long ltq_get_io_region_clock(vo
- u32 ddr_sel;
- unsigned long clk;
-
-- ddr_sel = ltq_cgu_sys_readl(1, CGU_SYS_DDR_SEL);
-+ ddr_sel = ltq_cgu_sys_readl(CGU_SYS_DDR_MASK, CGU_SYS_DDR_SHIFT);
-
- if (ddr_sel)
- clk = ltq_get_system_clock() / 3;
-@@ -83,7 +88,7 @@ unsigned long ltq_get_cpu_clock(void)
- u32 cpu_sel;
- unsigned long clk;
-
-- cpu_sel = ltq_cgu_sys_readl(1, CGU_SYS_CPU_SEL);
-+ cpu_sel = ltq_cgu_sys_readl(CGU_SYS_CPU_MASK, CGU_SYS_CPU_SHIFT);
-
- if (cpu_sel)
- clk = ltq_get_io_region_clock();
-@@ -98,7 +103,7 @@ unsigned long ltq_get_bus_clock(void)
- u32 fpi_sel;
- unsigned long clk;
-
-- fpi_sel = ltq_cgu_sys_readl(1, CGU_SYS_FPI_SEL);
-+ fpi_sel = ltq_cgu_sys_readl(CGU_SYS_FPI_MASK, CGU_SYS_FPI_SHIFT);
-
- if (fpi_sel)
- clk = ltq_get_io_region_clock() / 2;
diff --git a/package/boot/uboot-lantiq/patches/0043-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch b/package/boot/uboot-lantiq/patches/0043-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch
deleted file mode 100644
index eb688a9..0000000
--- a/package/boot/uboot-lantiq/patches/0043-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch
+++ /dev/null
@@ -1,346 +0,0 @@
---- /dev/null
-+++ b/board/arcadyan/vgv7510kw22/Makefile
-@@ -0,0 +1,27 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
---- /dev/null
-+++ b/board/arcadyan/vgv7510kw22/vgv7510kw22.c
-@@ -0,0 +1,136 @@
-+/*
-+ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <spi.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/chipid.h>
-+#include <asm/lantiq/cpu.h>
-+#include <asm/arch/gphy.h>
-+
-+#if defined(CONFIG_SPL_BUILD)
-+#define do_gpio_init 1
-+#define do_pll_init 1
-+#define do_dcdc_init 0
-+#elif defined(CONFIG_SYS_BOOT_RAM)
-+#define do_gpio_init 1
-+#define do_pll_init 0
-+#define do_dcdc_init 1
-+#elif defined(CONFIG_SYS_BOOT_NOR)
-+#define do_gpio_init 1
-+#define do_pll_init 1
-+#define do_dcdc_init 1
-+#else
-+#define do_gpio_init 0
-+#define do_pll_init 0
-+#define do_dcdc_init 1
-+#endif
-+
-+#define GPIO_POWER_GREEN 14
-+
-+static void gpio_init(void)
-+{
-+ /* SPI CS 0.4 to serial flash */
-+ gpio_direction_output(10, 1);
-+
-+ /* Turn on the green power LED */
-+ gpio_direction_output(GPIO_POWER_GREEN, 0);
-+ gpio_set_value(GPIO_POWER_GREEN, 0);
-+}
-+
-+int board_early_init_f(void)
-+{
-+ if (do_gpio_init)
-+ gpio_init();
-+
-+ if (do_pll_init)
-+ ltq_pll_init();
-+
-+ if (do_dcdc_init)
-+ ltq_dcdc_init(0x7F);
-+
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* unused */
-+ { 0, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
-+ /* unused */
-+ { 1, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
-+ /* Internal GPHY0 with 10/100 firmware for LAN port 2 */
-+ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
-+ /* Internal GPHY0 with 10/100 firmware for LAN port 1 */
-+ { 3, 0x12, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
-+ /* Internal GPHY1 with 10/100 firmware for LAN port 4 */
-+ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
-+ /* Internal GPHY1 with 10/100 firmware for LAN port 3 */
-+ { 5, 0x14, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t * bis)
-+{
-+ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
-+ const ulong fw_addr = 0x80FF0000;
-+
-+ if (ltq_chip_version_get() == 1)
-+ ltq_gphy_phy22f_a1x_load(fw_addr);
-+ else
-+ ltq_gphy_phy22f_a2x_load(fw_addr);
-+
-+ ltq_cgu_gphy_clk_src(clk);
-+
-+ ltq_rcu_gphy_boot(0, fw_addr);
-+ ltq_rcu_gphy_boot(1, fw_addr);
-+
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-+{
-+ if (bus)
-+ return 0;
-+
-+ if (cs == 4)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+void spi_cs_activate(struct spi_slave *slave)
-+{
-+ switch (slave->cs) {
-+ case 4:
-+ gpio_set_value(10, 0);
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+void spi_cs_deactivate(struct spi_slave *slave)
-+{
-+ switch (slave->cs) {
-+ case 4:
-+ gpio_set_value(10, 1);
-+ break;
-+ default:
-+ break;
-+ }
-+}
---- /dev/null
-+++ b/board/arcadyan/vgv7510kw22/config.mk
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
---- /dev/null
-+++ b/board/arcadyan/vgv7510kw22/ddr_settings.h
-@@ -0,0 +1,71 @@
-+/*
-+ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
-+ * Based on code by:
-+ * Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
-+ * and Lantiq Deutschland GmbH
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_CCR00_VALUE 0x101
-+#define MC_CCR01_VALUE 0x1000100
-+#define MC_CCR02_VALUE 0x1010000
-+#define MC_CCR03_VALUE 0x100
-+#define MC_CCR04_VALUE 0x1000000
-+#define MC_CCR05_VALUE 0x1000101
-+#define MC_CCR06_VALUE 0x1000100
-+#define MC_CCR07_VALUE 0x1010000
-+#define MC_CCR08_VALUE 0x1000101
-+#define MC_CCR09_VALUE 0x0
-+#define MC_CCR10_VALUE 0x2000100
-+#define MC_CCR11_VALUE 0x2000401
-+#define MC_CCR12_VALUE 0x30000
-+#define MC_CCR13_VALUE 0x202
-+#define MC_CCR14_VALUE 0x7080A0F
-+#define MC_CCR15_VALUE 0x2040F
-+#define MC_CCR16_VALUE 0x40000
-+#define MC_CCR17_VALUE 0x70102
-+#define MC_CCR18_VALUE 0x4020002
-+#define MC_CCR19_VALUE 0x30302
-+#define MC_CCR20_VALUE 0x8000700
-+#define MC_CCR21_VALUE 0x40F020A
-+#define MC_CCR22_VALUE 0x0
-+#define MC_CCR23_VALUE 0xC020000
-+#define MC_CCR24_VALUE 0x4401B04
-+#define MC_CCR25_VALUE 0x0
-+#define MC_CCR26_VALUE 0x0
-+#define MC_CCR27_VALUE 0x6420000
-+#define MC_CCR28_VALUE 0x0
-+#define MC_CCR29_VALUE 0x0
-+#define MC_CCR30_VALUE 0x798
-+#define MC_CCR31_VALUE 0x0
-+#define MC_CCR32_VALUE 0x0
-+#define MC_CCR33_VALUE 0x650000
-+#define MC_CCR34_VALUE 0x200C8
-+#define MC_CCR35_VALUE 0x1D445D
-+#define MC_CCR36_VALUE 0xC8
-+#define MC_CCR37_VALUE 0xC351
-+#define MC_CCR38_VALUE 0x0
-+#define MC_CCR39_VALUE 0x141F04
-+#define MC_CCR40_VALUE 0x142704
-+#define MC_CCR41_VALUE 0x141B42
-+#define MC_CCR42_VALUE 0x141B42
-+#define MC_CCR43_VALUE 0x566504
-+#define MC_CCR44_VALUE 0x566504
-+#define MC_CCR45_VALUE 0x565F17
-+#define MC_CCR46_VALUE 0x565F17
-+#define MC_CCR47_VALUE 0x0
-+#define MC_CCR48_VALUE 0x0
-+#define MC_CCR49_VALUE 0x0
-+#define MC_CCR50_VALUE 0x0
-+#define MC_CCR51_VALUE 0x0
-+#define MC_CCR52_VALUE 0x133
-+#define MC_CCR53_VALUE 0xF3014B27
-+#define MC_CCR54_VALUE 0xF3014B27
-+#define MC_CCR55_VALUE 0xF3014B27
-+#define MC_CCR56_VALUE 0xF3014B27
-+#define MC_CCR57_VALUE 0x7800301
-+#define MC_CCR58_VALUE 0x7800301
-+#define MC_CCR59_VALUE 0x7800301
-+#define MC_CCR60_VALUE 0x7800301
-+#define MC_CCR61_VALUE 0x4
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -531,6 +531,9 @@ Active mips mips32 incai
- Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd at denx.de>
- Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd at denx.de>
-+Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_brn vgv7510kw22:SYS_BOOT_BRN Martin Blumenstingl <martin.blumenstingl at googlemail.com>
-+Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_nor vgv7510kw22:SYS_BOOT_NOR Martin Blumenstingl <martin.blumenstingl at googlemail.com>
-+Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_ram vgv7510kw22:SYS_BOOT_RAM Martin Blumenstingl <martin.blumenstingl at googlemail.com>
- Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
- Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---- /dev/null
-+++ b/include/configs/vgv7510kw22.h
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "VGV7510KW22"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Arcadyan VGV7510KW22"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
-+#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29GL128EL parallel flash */
-+
-+#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
-+#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
-+#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
-+
-+#define CONFIG_SPL_SPI_BUS 0
-+#define CONFIG_SPL_SPI_CS 4
-+#define CONFIG_SPL_SPI_MAX_HZ 25000000
-+#define CONFIG_SPL_SPI_MODE 0
-+
-+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
-+
-+#define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16 MB */
-+
-+/* Environment */
-+#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
-+#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
-+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
-+#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
-+
-+#if defined(CONFIG_SYS_BOOT_BRN)
-+#define CONFIG_SYS_TEXT_BASE 0x80002000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_DISABLE_CACHE
-+#define CONFIG_ENV_IS_NOWHERE
-+#elif defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (384 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (128 * 1024)
-+
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
-+
-+/* Pull in default board configs for Lantiq XWAY VRX200 */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ "kernel_addr=0xB0080000\0"
-+
-+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0044-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch b/package/boot/uboot-lantiq/patches/0044-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch
deleted file mode 100644
index 5cc71b6..0000000
--- a/package/boot/uboot-lantiq/patches/0044-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch
+++ /dev/null
@@ -1,240 +0,0 @@
---- /dev/null
-+++ b/board/arcadyan/arv8539pw22/Makefile
-@@ -0,0 +1,28 @@
-+#
-+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).o
-+
-+COBJS = $(BOARD).o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-+
---- /dev/null
-+++ b/board/arcadyan/arv8539pw22/arv8539pw22.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
-+ * Copyright (C) 2013 Oliver Muth <dr.o.muth at gmx.de>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <switch.h>
-+#include <asm/gpio.h>
-+#include <asm/lantiq/eth.h>
-+#include <asm/lantiq/reset.h>
-+#include <asm/lantiq/chipid.h>
-+
-+int board_early_init_f(void)
-+{
-+ return 0;
-+}
-+
-+int checkboard(void)
-+{
-+ puts("Board: " CONFIG_BOARD_NAME "\n");
-+ ltq_chip_print_info();
-+
-+ return 0;
-+}
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* MAC0: Atheros ar8216 switch */
-+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_MII },
-+};
-+
-+static const struct ltq_eth_board_config eth_board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return ltq_eth_initialize(ð_board_config);
-+}
-+
-+static struct switch_device ar8216_dev = {
-+ .name = "ar8216",
-+ .cpu_port = 0,
-+ .port_mask = 0xF,
-+};
-+
-+int board_switch_init(void)
-+{
-+ return switch_device_register(&ar8216_dev);
-+}
-+
---- /dev/null
-+++ b/board/arcadyan/arv8539pw22/config.mk
-@@ -0,0 +1,8 @@
-+#
-+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
-+
---- /dev/null
-+++ b/board/arcadyan/arv8539pw22/ddr_settings.h
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * This file has been generated with lantiq_ram_extract_magic.awk script.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#define MC_DC00_VALUE 0x1B1B
-+#define MC_DC01_VALUE 0x0
-+#define MC_DC02_VALUE 0x0
-+#define MC_DC03_VALUE 0x0
-+#define MC_DC04_VALUE 0x0
-+#define MC_DC05_VALUE 0x200
-+#define MC_DC06_VALUE 0x605
-+#define MC_DC07_VALUE 0x303
-+#define MC_DC08_VALUE 0x102
-+#define MC_DC09_VALUE 0x70A
-+#define MC_DC10_VALUE 0x203
-+#define MC_DC11_VALUE 0xC02
-+#define MC_DC12_VALUE 0x1C8
-+#define MC_DC13_VALUE 0x1
-+#define MC_DC14_VALUE 0x0
-+#define MC_DC15_VALUE 0x134
-+#define MC_DC16_VALUE 0xC800
-+#define MC_DC17_VALUE 0xD
-+#define MC_DC18_VALUE 0x301
-+#define MC_DC19_VALUE 0x200
-+#define MC_DC20_VALUE 0xA03
-+#define MC_DC21_VALUE 0x1400
-+#define MC_DC22_VALUE 0x1414
-+#define MC_DC23_VALUE 0x0
-+#define MC_DC24_VALUE 0x5B
-+#define MC_DC25_VALUE 0x0
-+#define MC_DC26_VALUE 0x0
-+#define MC_DC27_VALUE 0x0
-+#define MC_DC28_VALUE 0x510
-+#define MC_DC29_VALUE 0x4E20
-+#define MC_DC30_VALUE 0x8235
-+#define MC_DC31_VALUE 0x0
-+#define MC_DC32_VALUE 0x0
-+#define MC_DC33_VALUE 0x0
-+#define MC_DC34_VALUE 0x0
-+#define MC_DC35_VALUE 0x0
-+#define MC_DC36_VALUE 0x0
-+#define MC_DC37_VALUE 0x0
-+#define MC_DC38_VALUE 0x0
-+#define MC_DC39_VALUE 0x0
-+#define MC_DC40_VALUE 0x0
-+#define MC_DC41_VALUE 0x0
-+#define MC_DC42_VALUE 0x0
-+#define MC_DC43_VALUE 0x0
-+#define MC_DC44_VALUE 0x0
-+#define MC_DC45_VALUE 0x500
-+#define MC_DC46_VALUE 0x0
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -553,6 +553,9 @@ Active mips mips32 danube arcadyan arv752dpw
- Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_brn arv752dpw22:SYS_BOOT_BRN -
- Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_nor arv752dpw22:SYS_BOOT_NOR -
- Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_ram arv752dpw22:SYS_BOOT_RAM -
-+Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_brn arv8539pw22:SYS_BOOT_BRN -
-+Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_nor arv8539pw22:SYS_BOOT_NOR -
-+Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_ram arv8539pw22:SYS_BOOT_RAM -
- Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
- Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
- Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
---- /dev/null
-+++ b/include/configs/arv8539pw22.h
-@@ -0,0 +1,68 @@
-+/*
-+ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_MACH_TYPE "ARV8539PW22"
-+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "Speedport W 504V Typ A"
-+
-+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
-+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
-+
-+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
-+
-+/* Switch devices */
-+#define CONFIG_SWITCH_MULTI
-+#define CONFIG_SWITCH_AR8216
-+
-+/* Environment */
-+#if defined(CONFIG_SYS_BOOT_NOR)
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-+#else
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_ENV_SIZE (8 * 1024)
-+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-+
-+/* Burnboot loadable image */
-+#if defined(CONFIG_SYS_BOOT_BRN)
-+#define CONFIG_SYS_TEXT_BASE 0x80002000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SYS_DISABLE_CACHE
-+#define CONFIG_ENV_OVERWRITE 1
-+#endif
-+
-+
-+/* Console */
-+#define CONFIG_LTQ_ADVANCED_CONSOLE
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_CONSOLE_ASC 1
-+#define CONFIG_CONSOLE_DEV "ttyS1"
-+
-+/* Pull in default board configs for Lantiq XWAY Danube */
-+#include <asm/lantiq/config.h>
-+#include <asm/arch/config.h>
-+
-+/* Pull in default OpenWrt configs for Lantiq SoC */
-+#include "openwrt-lantiq-common.h"
-+
-+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
-+ "kernel_addr=0xB0040000\0"
-+
-+#endif /* __CONFIG_H */
-
diff --git a/package/boot/uboot-lantiq/patches/0045-no_extern_inline.patch b/package/boot/uboot-lantiq/patches/0045-no_extern_inline.patch
deleted file mode 100644
index 45e8b7d..0000000
--- a/package/boot/uboot-lantiq/patches/0045-no_extern_inline.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From b11c5d1dc29e81326d1215011d19377737082aeb Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-Date: Wed, 1 Jul 2015 16:36:43 +0200
-Subject: [PATCH] MIPS: change 'extern inline' to 'static inline'
-
-The kernel changed it a long time ago. Also this is now broken
-on gcc-5.x.
-
-Reported-by: Andy Kennedy <andy.kennedy at adtran.com>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
----
- arch/mips/include/asm/io.h | 12 ++++++------
- arch/mips/include/asm/system.h | 6 +++---
- 2 files changed, 9 insertions(+), 9 deletions(-)
-
-diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
-index 3fa37f5..a7ab087 100644
---- a/arch/mips/include/asm/io.h
-+++ b/arch/mips/include/asm/io.h
-@@ -117,7 +117,7 @@ static inline void set_io_port_base(unsigned long base)
- * Change virtual addresses to physical addresses and vv.
- * These are trivial on the 1:1 Linux/MIPS mapping
- */
--extern inline phys_addr_t virt_to_phys(volatile void * address)
-+static inline phys_addr_t virt_to_phys(volatile void * address)
- {
- #ifndef CONFIG_64BIT
- return CPHYSADDR(address);
-@@ -126,7 +126,7 @@ extern inline phys_addr_t virt_to_phys(volatile void * address)
- #endif
- }
-
--extern inline void * phys_to_virt(unsigned long address)
-+static inline void * phys_to_virt(unsigned long address)
- {
- #ifndef CONFIG_64BIT
- return (void *)KSEG0ADDR(address);
-@@ -138,7 +138,7 @@ extern inline void * phys_to_virt(unsigned long address)
- /*
- * IO bus memory addresses are also 1:1 with the physical address
- */
--extern inline unsigned long virt_to_bus(volatile void * address)
-+static inline unsigned long virt_to_bus(volatile void * address)
- {
- #ifndef CONFIG_64BIT
- return CPHYSADDR(address);
-@@ -147,7 +147,7 @@ extern inline unsigned long virt_to_bus(volatile void * address)
- #endif
- }
-
--extern inline void * bus_to_virt(unsigned long address)
-+static inline void * bus_to_virt(unsigned long address)
- {
- #ifndef CONFIG_64BIT
- return (void *)KSEG0ADDR(address);
-@@ -165,12 +165,12 @@ extern unsigned long isa_slot_offset;
- extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
-
- #if 0
--extern inline void *ioremap(unsigned long offset, unsigned long size)
-+static inline void *ioremap(unsigned long offset, unsigned long size)
- {
- return __ioremap(offset, size, _CACHE_UNCACHED);
- }
-
--extern inline void *ioremap_nocache(unsigned long offset, unsigned long size)
-+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
- {
- return __ioremap(offset, size, _CACHE_UNCACHED);
- }
-diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
-index 7a28952..d56f73b 100644
---- a/arch/mips/include/asm/system.h
-+++ b/arch/mips/include/asm/system.h
-@@ -22,7 +22,7 @@
- #include <linux/kernel.h>
- #endif
-
--extern __inline__ void
-+static __inline__ void
- __sti(void)
- {
- __asm__ __volatile__(
-@@ -46,7 +46,7 @@ __sti(void)
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
--extern __inline__ void
-+static __inline__ void
- __cli(void)
- {
- __asm__ __volatile__(
-@@ -207,7 +207,7 @@ do { \
- * For 32 and 64 bit operands we can take advantage of ll and sc.
- * FIXME: This doesn't work for R3000 machines.
- */
--extern __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
-+static __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
- {
- #ifdef CONFIG_CPU_HAS_LLSC
- unsigned long dummy;
diff --git a/package/boot/uboot-lantiq/patches/0046-no_weak_alias.patch b/package/boot/uboot-lantiq/patches/0046-no_weak_alias.patch
deleted file mode 100644
index 4701ab1..0000000
--- a/package/boot/uboot-lantiq/patches/0046-no_weak_alias.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 3422299dc28fa8257677d03cc1253e3c9bf17e9f Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen at myspectrum.nl>
-Date: Thu, 26 Jun 2014 20:18:31 +0200
-Subject: [PATCH] common: main.c: make show_boot_progress __weak
-
-This not only looks a bit better it also prevents a
-warning with W=1 (no previous prototype).
-
-Signed-off-by: Jeroen Hofstee <jeroen at myspectrum.nl>
-Acked-by: Simon Glass <sjg at chromium.org>
----
- common/main.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/common/main.c b/common/main.c
-index 32618f1..2979fbe 100644
---- a/common/main.c
-+++ b/common/main.c
-@@ -17,8 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
- /*
- * Board-specific Platform code can reimplement show_boot_progress () if needed
- */
--void inline __show_boot_progress (int val) {}
--void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
-+__weak void show_boot_progress(int val) {}
-
- static void modem_init(void)
- {
diff --git a/package/boot/uboot-lantiq/patches/0047-add-gcc5-support.patch b/package/boot/uboot-lantiq/patches/0047-add-gcc5-support.patch
deleted file mode 100644
index 4d55f00..0000000
--- a/package/boot/uboot-lantiq/patches/0047-add-gcc5-support.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 478b02f1a7043b673565075ea5016376f3293b23 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede at redhat.com>
-Date: Sat, 7 Feb 2015 22:52:40 +0100
-Subject: [PATCH] Add linux/compiler-gcc5.h to fix builds with gcc5
-
-Add linux/compiler-gcc5/h from the kernel sources at:
-
-commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
-Author: Steven Noonan <steven at uplinklabs.net>
-Date: Sat Oct 25 15:09:42 2014 -0700
-
- compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles
-
-Signed-off-by: Hans de Goede <hdegoede at redhat.com>
----
- include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 65 insertions(+)
- create mode 100644 include/linux/compiler-gcc5.h
-
-diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
-new file mode 100644
-index 0000000..c8c5659
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,65 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ in the preprocessor, but we can live with this because they're unreleased.
-+ Maketime probing would be overkill here.
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased. Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
---
-1.7.10.4
-
diff --git a/package/boot/uboot-lantiq/patches/0100-MIPS-add-board-support-for-Easy-50712.patch b/package/boot/uboot-lantiq/patches/0100-MIPS-add-board-support-for-Easy-50712.patch
new file mode 100644
index 0000000..9d6dc2d
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0100-MIPS-add-board-support-for-Easy-50712.patch
@@ -0,0 +1,306 @@
+--- /dev/null
++++ b/board/lantiq/easy50712/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/lantiq/easy50712/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/lantiq/easy50712/ddr_settings.h
+@@ -0,0 +1,54 @@
++/*
++ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70a
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xc02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x13c
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xd
++#define MC_DC18_VALUE 0x300
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA04
++#define MC_DC21_VALUE 0xd00
++#define MC_DC22_VALUE 0xd0d
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x62
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x2d89
++#define MC_DC30_VALUE 0x8300
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- /dev/null
++++ b/board/lantiq/easy50712/easy50712.c
+@@ -0,0 +1,112 @@
++/*
++ * Copyright (C) 2010 Thomas Langer <thomas.langer at lantiq.com>
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <spi.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++static void gpio_init(void)
++{
++ /* SPI/CS output (low-active) for serial flash */
++ gpio_direction_output(22, 1);
++
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++
++ /* enable CLK_OUT2 for external switch */
++ gpio_set_altfunc(3, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++}
++
++int board_early_init_f(void)
++{
++ gpio_init();
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Lantiq ADM6996I switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device adm6996i_dev = {
++ .name = "adm6996i",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ /* Deactivate HRST line to release reset of ADM6996I switch */
++ ltq_reset_once(LTQ_RESET_HARD, 200000);
++
++ /* ADM6996I needs some time to come out of reset */
++ __udelay(50000);
++
++ return switch_device_register(&adm6996i_dev);
++}
++
++int spi_cs_is_valid(unsigned int bus, unsigned int cs)
++{
++ if (bus)
++ return 0;
++
++ switch (cs) {
++ case 2:
++ return 1;
++ default:
++ return 0;
++ }
++}
++
++void spi_cs_activate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 2:
++ gpio_set_value(22, 0);
++ break;
++ default:
++ break;
++ }
++}
++
++void spi_cs_deactivate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 2:
++ gpio_set_value(22, 1);
++ break;
++ default:
++ break;
++ }
++}
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -502,6 +502,9 @@ Active mips mips32 au1x0
+ Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas at corelatus.se>
+ Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas at corelatus.se>
+ Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
++Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 incaip - incaip incaip - Wolfgang Denk <wd at denx.de>
+ Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd at denx.de>
+ Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd at denx.de>
+--- /dev/null
++++ b/include/configs/easy50712.h
+@@ -0,0 +1,79 @@
++/*
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "EASY50712"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Lantiq EASY50712 Danube Reference Board"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++#define CONFIG_LTQ_SUPPORT_SPI_FLASH
++#define CONFIG_SPI_FLASH_ATMEL /* Have an AT45DB321D serial flash */
++
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH
++
++#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
++
++#define CONFIG_LTQ_SPL_COMP_LZO
++#define CONFIG_LTQ_SPL_CONSOLE
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_ADM6996I
++
++/* Environment */
++#define CONFIG_ENV_SPI_BUS 0
++#define CONFIG_ENV_SPI_CS 2
++#define CONFIG_ENV_SPI_MAX_HZ 20000000
++#define CONFIG_ENV_SPI_MODE 0
++
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#elif defined(CONFIG_SYS_BOOT_NORSPL)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (128 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0101-MIPS-add-board-support-for-Easy-80920.patch b/package/boot/uboot-lantiq/patches/0101-MIPS-add-board-support-for-Easy-80920.patch
new file mode 100644
index 0000000..fcc9163
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0101-MIPS-add-board-support-for-Easy-80920.patch
@@ -0,0 +1,379 @@
+--- /dev/null
++++ b/board/lantiq/easy80920/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/lantiq/easy80920/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/lantiq/easy80920/ddr_settings.h
+@@ -0,0 +1,69 @@
++/*
++ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000100
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x101
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x0
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000300
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401B04
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x0
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1D445D
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x141F04
++#define MC_CCR40_VALUE 0x142704
++#define MC_CCR41_VALUE 0x141b42
++#define MC_CCR42_VALUE 0x141b42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x0
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7800301
++#define MC_CCR58_VALUE 0x7800301
++#define MC_CCR59_VALUE 0x7800301
++#define MC_CCR60_VALUE 0x7800301
++#define MC_CCR61_VALUE 0x4
+--- /dev/null
++++ b/board/lantiq/easy80920/easy80920.c
+@@ -0,0 +1,138 @@
++/*
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <spi.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SPL_BUILD)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 0
++#elif defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++static void gpio_init(void)
++{
++ /* SPI CS 0.4 to serial flash */
++ gpio_direction_output(10, 1);
++
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* GPIO 3.0 as input for NAND Ready Busy */
++ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
++ /* GPIO 3.1 as output for NAND Read */
++ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
++ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC3: unused */
++ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
++ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_addr = 0x80FF0000;
++
++ ltq_gphy_phy11g_a1x_load(fw_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_addr);
++ ltq_rcu_gphy_boot(1, fw_addr);
++
++ return ltq_eth_initialize(ð_board_config);
++}
++
++int spi_cs_is_valid(unsigned int bus, unsigned int cs)
++{
++ if (bus)
++ return 0;
++
++ if (cs == 4)
++ return 1;
++
++ return 0;
++}
++
++void spi_cs_activate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 4:
++ gpio_set_value(10, 0);
++ break;
++ default:
++ break;
++ }
++}
++
++void spi_cs_deactivate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 4:
++ gpio_set_value(10, 1);
++ break;
++ default:
++ break;
++ }
++}
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -509,6 +509,11 @@ Active mips mips32 incai
+ Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd at denx.de>
+ Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd at denx.de>
+ Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd at denx.de>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
+ Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
+ Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot at andestech.com>
+--- /dev/null
++++ b/include/configs/easy80920.h
+@@ -0,0 +1,109 @@
++/*
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "EASY80920"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Lantiq EASY80920 VRX200 Family Board"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++#define CONFIG_LTQ_SUPPORT_SPI_FLASH
++#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29LV620 serial flash */
++
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH
++
++#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
++#define CONFIG_SPL_SPI_BUS 0
++#define CONFIG_SPL_SPI_CS 4
++#define CONFIG_SPL_SPI_MAX_HZ 25000000
++#define CONFIG_SPL_SPI_MODE 0
++
++#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
++
++#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
++#define CONFIG_SYS_NAND_PAGE_COUNT 128
++#define CONFIG_SYS_NAND_PAGE_SIZE 2048
++#define CONFIG_SYS_NAND_OOBSIZE 64
++#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000
++
++#define CONFIG_LTQ_SPL_COMP_LZO
++#define CONFIG_LTQ_SPL_CONSOLE
++
++#define CONFIG_SYS_DRAM_PROBE
++
++/* Environment */
++#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
++#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
++#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
++#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
++
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (384 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#elif defined(CONFIG_SYS_BOOT_NORSPL)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#elif defined(CONFIG_SYS_BOOT_SFSPL)
++#define CONFIG_ENV_IS_IN_SPI_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#elif defined(CONFIG_SYS_BOOT_NANDSPL)
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (256 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
++
++#define CONFIG_ENV_UPDATE_UBOOT_SF \
++ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NAND \
++ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ CONFIG_ENV_UPDATE_UBOOT_SF \
++ CONFIG_ENV_UPDATE_UBOOT_NAND
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0102-MIPS-add-board-support-for-Arcadyan-ARV4519PW.patch b/package/boot/uboot-lantiq/patches/0102-MIPS-add-board-support-for-Arcadyan-ARV4519PW.patch
new file mode 100644
index 0000000..51738e4
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0102-MIPS-add-board-support-for-Arcadyan-ARV4519PW.patch
@@ -0,0 +1,242 @@
+From 9f915cf9550a6234adecaf3031c2b279835e14af Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka at openwrt.org>
+Date: Sat, 2 Mar 2013 23:34:00 +0100
+Subject: MIPS: add board support for Arcadyan ARV4519
+
+Signed-off-by: Luka Perkov <luka at openwrt.org>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- /dev/null
++++ b/board/arcadyan/arv4519pw/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/arv4519pw/arv4519pw.c
+@@ -0,0 +1,51 @@
++/*
++ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Atheros ar8216 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_NONE },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device ar8216_dev = {
++ .name = "ar8216",
++ .cpu_port = 0,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&ar8216_dev);
++}
+--- /dev/null
++++ b/board/arcadyan/arv4519pw/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/arv4519pw/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x131
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA04
++#define MC_DC21_VALUE 0x1700
++#define MC_DC22_VALUE 0x1717
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5A
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -502,6 +502,9 @@ Active mips mips32 au1x0
+ Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas at corelatus.se>
+ Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas at corelatus.se>
+ Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
++Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+--- /dev/null
++++ b/include/configs/arv4519pw.h
+@@ -0,0 +1,67 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV4519PW"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV4519PW"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_AR8216
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Brnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0103-MIPS-add-board-support-for-Arcadyan-ARV7518PW.patch b/package/boot/uboot-lantiq/patches/0103-MIPS-add-board-support-for-Arcadyan-ARV7518PW.patch
new file mode 100644
index 0000000..21e6a2c
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0103-MIPS-add-board-support-for-Arcadyan-ARV7518PW.patch
@@ -0,0 +1,242 @@
+From 54a31b334162e8dc2ea891057ddeab42978db8b3 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka at openwrt.org>
+Date: Sat, 2 Mar 2013 23:34:00 +0100
+Subject: MIPS: add board support for Arcadyan ARV7518
+
+Signed-off-by: Luka Perkov <luka at openwrt.org>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- /dev/null
++++ b/board/arcadyan/arv7518pw/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/arv7518pw/arv7518pw.c
+@@ -0,0 +1,51 @@
++/*
++ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Atheros ar8216 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_NONE },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device ar8216_dev = {
++ .name = "ar8216",
++ .cpu_port = 0,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&ar8216_dev);
++}
+--- /dev/null
++++ b/board/arcadyan/arv7518pw/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/arv7518pw/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x134
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1400
++#define MC_DC22_VALUE 0x1414
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5B
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -505,6 +505,9 @@ Active mips mips32 au1x0
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+--- /dev/null
++++ b/include/configs/arv7518pw.h
+@@ -0,0 +1,67 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV7518PW"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV7518PW"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_AR8216
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Brnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0104-MIPS-add-board-support-for-AudioCodes-MP-252.patch b/package/boot/uboot-lantiq/patches/0104-MIPS-add-board-support-for-AudioCodes-MP-252.patch
new file mode 100644
index 0000000..00820f8
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0104-MIPS-add-board-support-for-AudioCodes-MP-252.patch
@@ -0,0 +1,248 @@
+From 4bacfc80eae768be45f9ddf7588ec55281354648 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel.golle at gmail.com>
+Date: Fri, 8 Mar 2013 13:29:04 +0200
+Subject: MIPS: add board support for AudioCodes MP-252
+
+Signed-off-by: Daniel Golle <dgolle at allnet.de>
+
+--- /dev/null
++++ b/board/audiocodes/acmp252/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/audiocodes/acmp252/acmp252.c
+@@ -0,0 +1,66 @@
++/*
++ * Copyright (C) 2013 Daniel Golle <daniel.golle at gmail.com>
++ * Copyright (C) 2011 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++static void gpio_init(void)
++{
++ /* Activate reset line of ADM6996I switch */
++ gpio_direction_output(19, 0);
++}
++
++int board_early_init_f(void)
++{
++ gpio_init();
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Lantiq ADM6996I switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device adm6996i_dev = {
++ .name = "adm6996i",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ /* Deactivate reset line of ADM6996I switch */
++ gpio_set_value(19, 1);
++
++ /* ADM6996I needs some time to come out of reset */
++ __udelay(50000);
++
++ return switch_device_register(&adm6996i_dev);
++}
+--- /dev/null
++++ b/board/audiocodes/acmp252/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/audiocodes/acmp252/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x403
++#define MC_DC08_VALUE 0x103
++#define MC_DC09_VALUE 0x80B
++#define MC_DC10_VALUE 0x304
++#define MC_DC11_VALUE 0xD03
++#define MC_DC12_VALUE 0x2C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x13C
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x402
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1700
++#define MC_DC22_VALUE 0x1717
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5C
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x2D93
++#define MC_DC30_VALUE 0x8300
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -508,6 +508,8 @@ Active mips mips32 danub
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
++Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+--- /dev/null
++++ b/include/configs/acmp252.h
+@@ -0,0 +1,60 @@
++/*
++ * Copyright (C) 2013 Daniel Golle <daniel.golle at gmail.com>
++ * Copyright (C) 2011 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ACMP252"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "AudioCodes MP-252"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_ADM6996I
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0105-MIPS-add-board-support-for-AVM-FritzBox-3370.patch b/package/boot/uboot-lantiq/patches/0105-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
new file mode 100644
index 0000000..77014e4
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0105-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
@@ -0,0 +1,354 @@
+From 37a95ae4ba75407a26862ece6f48fa68aa6c5c78 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+Date: Sat, 2 Mar 2013 23:34:00 +0100
+Subject: MIPS: add board support for AVM FritzBox 3370
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- /dev/null
++++ b/board/avm/fb3370/Makefile
+@@ -0,0 +1,28 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/avm/fb3370/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/avm/fb3370/ddr_settings.h
+@@ -0,0 +1,69 @@
++/*
++ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000100
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x101
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x0
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000300
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401B04
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x0
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1D445D
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x141F04
++#define MC_CCR40_VALUE 0x142704
++#define MC_CCR41_VALUE 0x141B42
++#define MC_CCR42_VALUE 0x141B42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x0
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7800301
++#define MC_CCR58_VALUE 0x7800301
++#define MC_CCR59_VALUE 0x7800301
++#define MC_CCR60_VALUE 0x7800301
++#define MC_CCR61_VALUE 0x4
+--- /dev/null
++++ b/board/avm/fb3370/fb3370.c
+@@ -0,0 +1,138 @@
++/*
++ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <spi.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SPL_BUILD)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 0
++#elif defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++static void gpio_init(void)
++{
++ /* SPI CS 0.4 to serial flash */
++ gpio_direction_output(10, 1);
++
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* GPIO 3.0 as input for NAND Ready Busy */
++ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
++ /* GPIO 3.1 as output for NAND Read */
++ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
++ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC3: unused */
++ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
++ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_addr = 0x80FF0000;
++
++ ltq_gphy_phy11g_a1x_load(fw_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_addr);
++ ltq_rcu_gphy_boot(1, fw_addr);
++
++ return ltq_eth_initialize(ð_board_config);
++}
++
++int spi_cs_is_valid(unsigned int bus, unsigned int cs)
++{
++ if (bus)
++ return 0;
++
++ if (cs == 4)
++ return 1;
++
++ return 0;
++}
++
++void spi_cs_activate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 4:
++ gpio_set_value(10, 0);
++ break;
++ default:
++ break;
++ }
++}
++
++void spi_cs_deactivate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 4:
++ gpio_set_value(10, 1);
++ break;
++ default:
++ break;
++ }
++}
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -517,6 +517,9 @@ Active mips mips32 incai
+ Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd at denx.de>
+ Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd at denx.de>
+ Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd at denx.de>
++Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+--- /dev/null
++++ b/include/configs/fb3370.h
+@@ -0,0 +1,78 @@
++/*
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "FB3370"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "AVM FritzBox 3370"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_SPI_FLASH
++#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29LV620 serial flash */
++
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH
++
++#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
++#define CONFIG_SPL_SPI_BUS 0
++#define CONFIG_SPL_SPI_CS 4
++#define CONFIG_SPL_SPI_MAX_HZ 25000000
++#define CONFIG_SPL_SPI_MODE 0
++
++#define CONFIG_SYS_DRAM_PROBE
++
++/* Environment */
++#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
++#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
++#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
++#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
++
++#if defined(CONFIG_SYS_BOOT_SFSPL)
++#define CONFIG_ENV_IS_IN_SPI_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++#if defined(CONFIG_SYS_BOOT_EVA)
++#define CONFIG_SYS_TEXT_BASE 0x80100000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_SF \
++ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_SF
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0106-MIPS-add-board-support-for-Gigaset-SX76X.patch b/package/boot/uboot-lantiq/patches/0106-MIPS-add-board-support-for-Gigaset-SX76X.patch
new file mode 100644
index 0000000..96737fa
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0106-MIPS-add-board-support-for-Gigaset-SX76X.patch
@@ -0,0 +1,247 @@
+From 9e9dec563e4d061e7b34d2d59a89eb05c60f43a7 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka at openwrt.org>
+Date: Sat, 2 Mar 2013 23:34:00 +0100
+Subject: MIPS: add board support for Gigaset SX76X
+
+Signed-off-by: Luka Perkov <luka at openwrt.org>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- /dev/null
++++ b/board/gigaset/sx76x/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/gigaset/sx76x/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/gigaset/sx76x/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x202
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0xF3E
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x300
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA04
++#define MC_DC21_VALUE 0xF00
++#define MC_DC22_VALUE 0xF0F
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x63
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x100
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x514
++#define MC_DC29_VALUE 0x2D89
++#define MC_DC30_VALUE 0x8300
++#define MC_DC31_VALUE 0x2002
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- /dev/null
++++ b/board/gigaset/sx76x/sx76x.c
+@@ -0,0 +1,65 @@
++/*
++ * Copyright (C) 2011 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++static void gpio_init(void)
++{
++ /* Activate reset line of ADM6996I switch */
++ gpio_direction_output(19, 0);
++}
++
++int board_early_init_f(void)
++{
++ gpio_init();
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Lantiq ADM6996I switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device adm6996i_dev = {
++ .name = "adm6996i",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ /* Deactivate reset line of ADM6996I switch */
++ gpio_set_value(19, 1);
++
++ /* ADM6996I needs some time to come out of reset */
++ __udelay(50000);
++
++ return switch_device_register(&adm6996i_dev);
++}
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -510,6 +510,8 @@ Active mips mips32 danub
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
+ Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
++Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube gigaset sx76x gigasx76x_ram sx76x:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+--- /dev/null
++++ b/include/configs/sx76x.h
+@@ -0,0 +1,59 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "GIGASX76X"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Gigaset sx76x"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_ADM6996I
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0107-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch b/package/boot/uboot-lantiq/patches/0107-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch
new file mode 100644
index 0000000..a1c0bde
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0107-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch
@@ -0,0 +1,301 @@
+From 3f7be04a148d23cdb5fd320e0e2923983f8bd1f4 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka at openwrt.org>
+Date: Tue, 6 Aug 2013 22:51:00 +0200
+Subject: MIPS: add board support for ZyXEL P-2812HNU-Fx
+
+Signed-off-by: Luka Perkov <luka at openwrt.org>
+
+--- /dev/null
++++ b/board/zyxel/p2812hnufx/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/zyxel/p2812hnufx/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/zyxel/p2812hnufx/ddr_settings.h
+@@ -0,0 +1,70 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka at openwrt.org>
++ *
++ * The values have been extracted from original ZyXEL U-Boot.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000100
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x101
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x0
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000300
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401B04
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x0
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1D445D
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x141F04
++#define MC_CCR40_VALUE 0x142704
++#define MC_CCR41_VALUE 0x141B42
++#define MC_CCR42_VALUE 0x141B42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x0
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7800301
++#define MC_CCR58_VALUE 0x7800301
++#define MC_CCR59_VALUE 0x7800301
++#define MC_CCR60_VALUE 0x7800301
++#define MC_CCR61_VALUE 0x4
+--- /dev/null
++++ b/board/zyxel/p2812hnufx/p2812hnufx.c
+@@ -0,0 +1,97 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SPL_BUILD)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 0
++#elif defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++static void gpio_init(void)
++{
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* GPIO 3.0 as input for NAND Ready Busy */
++ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
++ /* GPIO 3.1 as output for NAND Read */
++ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
++ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC3: unused */
++ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
++ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_addr = 0x80FF0000;
++
++ ltq_gphy_phy11g_a1x_load(fw_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_addr);
++ ltq_rcu_gphy_boot(1, fw_addr);
++
++ return ltq_eth_initialize(ð_board_config);
++}
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -527,6 +527,8 @@ Active mips mips32 vrx20
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++Active mips mips32 vrx200 zyxel p2812hnufx p2812hnufx_nandspl p2812hnufx:SYS_BOOT_NANDSPL Luka Perkov <luka at openwrt.org>
++Active mips mips32 vrx200 zyxel p2812hnufx p2812hnufx_ram p2812hnufx:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
+ Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
+ Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
+ Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot at andestech.com>
+--- /dev/null
++++ b/include/configs/p2812hnufx.h
+@@ -0,0 +1,67 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "P-2812HNU-Fx"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "ZyXEL P-2812HNU-Fx"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH /* Have a K9F1G08U0D NAND flash */
++
++#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
++#define CONFIG_SYS_NAND_PAGE_COUNT 64
++#define CONFIG_SYS_NAND_PAGE_SIZE 2048
++#define CONFIG_SYS_NAND_OOBSIZE 64
++#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000
++
++#define CONFIG_SYS_DRAM_PROBE
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NANDSPL)
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NAND \
++ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NAND
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0108-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch b/package/boot/uboot-lantiq/patches/0108-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch
new file mode 100644
index 0000000..28632dc
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0108-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch
@@ -0,0 +1,242 @@
+From fbdbf2ddf2b34d675d53de679c179788b0604c1a Mon Sep 17 00:00:00 2001
+From: Oliver Muth <dr.o.muth at gmx.de>
+Date: Sat, 12 Oct 2013 16:49:53 +0200
+Subject: MIPS: add board support for Arcadyan ARV752DPW
+
+Signed-off-by: Oliver Muth <dr.o.muth at gmx.de>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- /dev/null
++++ b/board/arcadyan/arv752dpw/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/arv752dpw/arv752dpw.c
+@@ -0,0 +1,51 @@
++/*
++ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
++ * Copyright (C) 2013 Oliver Muth <dr.o.muth at gmx.de>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Realtek rtl8306 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++static struct switch_device rtl8306_dev = {
++ .name = "rtl8306",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&rtl8306_dev);
++}
+--- /dev/null
++++ b/board/arcadyan/arv752dpw/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/arv752dpw/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x134
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1400
++#define MC_DC22_VALUE 0x1414
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5B
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -508,6 +508,9 @@ Active mips mips32 danub
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv752dpw arv752dpw_brn arv752dpw:SYS_BOOT_BRN -
++Active mips mips32 danube arcadyan arv752dpw arv752dpw_nor arv752dpw:SYS_BOOT_NOR -
++Active mips mips32 danube arcadyan arv752dpw arv752dpw_ram arv752dpw:SYS_BOOT_RAM -
+ Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
+ Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
+ Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+--- /dev/null
++++ b/include/configs/arv752dpw.h
+@@ -0,0 +1,67 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV752DPW"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV752DPW"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_RTL8206
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Brnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0109-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch b/package/boot/uboot-lantiq/patches/0109-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch
new file mode 100644
index 0000000..85e3ebd
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0109-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch
@@ -0,0 +1,244 @@
+From 09f411b4d10f10a62f147264121bb853b4649c3e Mon Sep 17 00:00:00 2001
+From: Oliver Muth <dr.o.muth at gmx.de>
+Date: Sat, 12 Oct 2013 16:49:53 +0200
+Subject: MIPS: add board support for Arcadyan ARV752DPW22
+
+Signed-off-by: Oliver Muth <dr.o.muth at gmx.de>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- /dev/null
++++ b/board/arcadyan/arv752dpw22/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/arv752dpw22/arv752dpw22.c
+@@ -0,0 +1,52 @@
++/*
++ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
++ * Copyright (C) 2013 Oliver Muth <dr.o.muth at gmx.de>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Atheros ar8216 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_MII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device ar8216_dev = {
++ .name = "ar8216",
++ .cpu_port = 0,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&ar8216_dev);
++}
+--- /dev/null
++++ b/board/arcadyan/arv752dpw22/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/arv752dpw22/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x134
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1400
++#define MC_DC22_VALUE 0x1414
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5B
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -511,6 +511,9 @@ Active mips mips32 danub
+ Active mips mips32 danube arcadyan arv752dpw arv752dpw_brn arv752dpw:SYS_BOOT_BRN -
+ Active mips mips32 danube arcadyan arv752dpw arv752dpw_nor arv752dpw:SYS_BOOT_NOR -
+ Active mips mips32 danube arcadyan arv752dpw arv752dpw_ram arv752dpw:SYS_BOOT_RAM -
++Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_brn arv752dpw22:SYS_BOOT_BRN -
++Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_nor arv752dpw22:SYS_BOOT_NOR -
++Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_ram arv752dpw22:SYS_BOOT_RAM -
+ Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
+ Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
+ Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+--- /dev/null
++++ b/include/configs/arv752dpw22.h
+@@ -0,0 +1,68 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV752DPW22"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV752DPW22"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_AR8216
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Burnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0110-MIPS-add-board-support-for-Arcadyan-ARV7510PW.patch b/package/boot/uboot-lantiq/patches/0110-MIPS-add-board-support-for-Arcadyan-ARV7510PW.patch
new file mode 100644
index 0000000..8c46368
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0110-MIPS-add-board-support-for-Arcadyan-ARV7510PW.patch
@@ -0,0 +1,269 @@
+From ba27086a5174130d138d645c2f4a49b08c3f2386 Mon Sep 17 00:00:00 2001
+From: Matti Laakso <malaakso at elisanet.fi>
+Date: Sat, 2 Mar 2013 23:34:00 +0100
+Subject: MIPS: add board support for Arcadyan ARV7510
+
+Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+
+--- /dev/null
++++ b/board/arcadyan/arv7510pw/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/arv7510pw/arv7510pw.c
+@@ -0,0 +1,72 @@
++/*
++ * Copyright (C) 2013 Matti Laakso <malaakso at elisanet.fi>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++
++static void gpio_init(void)
++{
++ /* Initialize SSIO GPIOs */
++ gpio_set_altfunc(4, 1, 0, 1);
++ gpio_set_altfunc(5, 1, 0, 1);
++ gpio_set_altfunc(6, 1, 0, 1);
++ ltq_gpio_init();
++
++ /* Power led on */
++ gpio_direction_output(76, 1);
++}
++
++int board_early_init_f(void)
++{
++ gpio_init();
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: ADM6996I */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device adm6996i_dev = {
++ .name = "adm6996i",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ /* Deactivate HRST line to release reset of ADM6996I switch */
++ ltq_reset_once(LTQ_RESET_HARD, 200000);
++
++ /* ADM6996I needs some time to come out of reset */
++ __udelay(50000);
++
++ return switch_device_register(&adm6996i_dev);
++}
+--- /dev/null
++++ b/board/arcadyan/arv7510pw/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/arv7510pw/ddr_settings.h
+@@ -0,0 +1,53 @@
++/*
++ * Copyright (C) 2013 Matti Laakso <malaakso at elisanet.fi>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x120
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA04
++#define MC_DC21_VALUE 0x1700
++#define MC_DC22_VALUE 0x1717
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x52
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -505,6 +505,9 @@ Active mips mips32 au1x0
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv7510pw arv7510pw_brn arv7510pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv7510pw arv7510pw_nor arv7510pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv7510pw arv7510pw_ram arv7510pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
+--- /dev/null
++++ b/include/configs/arv7510pw.h
+@@ -0,0 +1,75 @@
++/*
++ * Copyright (C) 2013 Matti Laakso <malaakso at elisanet.fi>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV7510PW"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV7510PW"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_ADM6996I
++
++/* SSIO */
++#define CONFIG_LTQ_SSIO_SHIFT_REGS
++#define CONFIG_LTQ_SSIO_EDGE_FALLING
++#define CONFIG_LTQ_SSIO_GPHY1_MODE 0
++#define CONFIG_LTQ_SSIO_GPHY2_MODE 0
++#define CONFIG_LTQ_SSIO_INIT_VALUE 0
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Brnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Buffered write broken in ARV7510PW */
++#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0060000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0111-MIPS-add-board-support-for-Arcadyan-ARV7510PW22.patch b/package/boot/uboot-lantiq/patches/0111-MIPS-add-board-support-for-Arcadyan-ARV7510PW22.patch
new file mode 100644
index 0000000..902a7cf
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0111-MIPS-add-board-support-for-Arcadyan-ARV7510PW22.patch
@@ -0,0 +1,238 @@
+--- /dev/null
++++ b/board/arcadyan/arv7510pw22/arv7510pw22.c
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2014 Ãlvaro Fernández Rojas <noltari at gmail.com>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ /* Switch on Power LED */
++ gpio_direction_output(2, 0);
++ gpio_set_value(2, 0);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Atheros ar8216 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_NONE },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device ar8216_dev = {
++ .name = "ar8216",
++ .cpu_port = 0,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&ar8216_dev);
++}
+--- /dev/null
++++ b/board/arcadyan/arv7510pw22/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/arv7510pw22/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2014 Ãlvaro Fernández Rojas <noltari at gmail.com>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x134
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1400
++#define MC_DC22_VALUE 0x1414
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5B
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- /dev/null
++++ b/board/arcadyan/arv7510pw22/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -508,6 +508,9 @@ Active mips mips32 danub
+ Active mips mips32 danube arcadyan arv7510pw arv7510pw_brn arv7510pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7510pw arv7510pw_nor arv7510pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7510pw arv7510pw_ram arv7510pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
++Active mips mips32 danube arcadyan arv7510pw22 arv7510pw22_brn arv7510pw22:SYS_BOOT_BRN Ãlvaro Fernández Rojas <noltari at gmail.com>
++Active mips mips32 danube arcadyan arv7510pw22 arv7510pw22_nor arv7510pw22:SYS_BOOT_NOR Ãlvaro Fernández Rojas <noltari at gmail.com>
++Active mips mips32 danube arcadyan arv7510pw22 arv7510pw22_ram arv7510pw22:SYS_BOOT_RAM Ãlvaro Fernández Rojas <noltari at gmail.com>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka at openwrt.org>
+--- /dev/null
++++ b/include/configs/arv7510pw22.h
+@@ -0,0 +1,67 @@
++/*
++ * Copyright (C) 2014 Ãlvaro Fernández Rojas <noltari at gmail.com>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV7510PW22"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV7510PW22"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_AR8216
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Burnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0060000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0112-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch b/package/boot/uboot-lantiq/patches/0112-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch
new file mode 100644
index 0000000..eb688a9
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0112-MIPS-add-board-support-for-Arcadyan-VGV7510KW22.patch
@@ -0,0 +1,346 @@
+--- /dev/null
++++ b/board/arcadyan/vgv7510kw22/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/vgv7510kw22/vgv7510kw22.c
+@@ -0,0 +1,136 @@
++/*
++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <spi.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SPL_BUILD)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 0
++#elif defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++#define GPIO_POWER_GREEN 14
++
++static void gpio_init(void)
++{
++ /* SPI CS 0.4 to serial flash */
++ gpio_direction_output(10, 1);
++
++ /* Turn on the green power LED */
++ gpio_direction_output(GPIO_POWER_GREEN, 0);
++ gpio_set_value(GPIO_POWER_GREEN, 0);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* unused */
++ { 0, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* unused */
++ { 1, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* Internal GPHY0 with 10/100 firmware for LAN port 2 */
++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
++ /* Internal GPHY0 with 10/100 firmware for LAN port 1 */
++ { 3, 0x12, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
++ /* Internal GPHY1 with 10/100 firmware for LAN port 4 */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
++ /* Internal GPHY1 with 10/100 firmware for LAN port 3 */
++ { 5, 0x14, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_addr = 0x80FF0000;
++
++ if (ltq_chip_version_get() == 1)
++ ltq_gphy_phy22f_a1x_load(fw_addr);
++ else
++ ltq_gphy_phy22f_a2x_load(fw_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_addr);
++ ltq_rcu_gphy_boot(1, fw_addr);
++
++ return ltq_eth_initialize(ð_board_config);
++}
++
++int spi_cs_is_valid(unsigned int bus, unsigned int cs)
++{
++ if (bus)
++ return 0;
++
++ if (cs == 4)
++ return 1;
++
++ return 0;
++}
++
++void spi_cs_activate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 4:
++ gpio_set_value(10, 0);
++ break;
++ default:
++ break;
++ }
++}
++
++void spi_cs_deactivate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 4:
++ gpio_set_value(10, 1);
++ break;
++ default:
++ break;
++ }
++}
+--- /dev/null
++++ b/board/arcadyan/vgv7510kw22/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/vgv7510kw22/ddr_settings.h
+@@ -0,0 +1,71 @@
++/*
++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
++ * Based on code by:
++ * Daniel Schwierzeck, daniel.schwierzeck at googlemail.com
++ * and Lantiq Deutschland GmbH
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000100
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x100
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x0
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000401
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401B04
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x0
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1D445D
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x141F04
++#define MC_CCR40_VALUE 0x142704
++#define MC_CCR41_VALUE 0x141B42
++#define MC_CCR42_VALUE 0x141B42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x0
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7800301
++#define MC_CCR58_VALUE 0x7800301
++#define MC_CCR59_VALUE 0x7800301
++#define MC_CCR60_VALUE 0x7800301
++#define MC_CCR61_VALUE 0x4
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -531,6 +531,9 @@ Active mips mips32 incai
+ Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd at denx.de>
+ Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd at denx.de>
+ Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd at denx.de>
++Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_brn vgv7510kw22:SYS_BOOT_BRN Martin Blumenstingl <martin.blumenstingl at googlemail.com>
++Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_nor vgv7510kw22:SYS_BOOT_NOR Martin Blumenstingl <martin.blumenstingl at googlemail.com>
++Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_ram vgv7510kw22:SYS_BOOT_RAM Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+--- /dev/null
++++ b/include/configs/vgv7510kw22.h
+@@ -0,0 +1,78 @@
++/*
++ * Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "VGV7510KW22"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan VGV7510KW22"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++#define CONFIG_LTQ_SUPPORT_SPI_FLASH
++#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29GL128EL parallel flash */
++
++#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
++#define CONFIG_SPL_SPI_BUS 0
++#define CONFIG_SPL_SPI_CS 4
++#define CONFIG_SPL_SPI_MAX_HZ 25000000
++#define CONFIG_SPL_SPI_MODE 0
++
++#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
++
++#define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16 MB */
++
++/* Environment */
++#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
++#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
++#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
++#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
++
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_IS_NOWHERE
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (384 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (128 * 1024)
++
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ "kernel_addr=0xB0080000\0"
++
++#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-lantiq/patches/0113-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch b/package/boot/uboot-lantiq/patches/0113-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch
new file mode 100644
index 0000000..e68ce2d
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0113-MIPS-add-board-support-for-Arcadyan-ARV8539PW22.patch
@@ -0,0 +1,239 @@
+--- /dev/null
++++ b/board/arcadyan/arv8539pw22/Makefile
+@@ -0,0 +1,28 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd at denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
++
+--- /dev/null
++++ b/board/arcadyan/arv8539pw22/arv8539pw22.c
+@@ -0,0 +1,53 @@
++/*
++ * Copyright (C) 2012 Luka Perkov <luka at openwrt.org>
++ * Copyright (C) 2013 Oliver Muth <dr.o.muth at gmx.de>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Atheros ar8216 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_MII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++
++static struct switch_device ar8216_dev = {
++ .name = "ar8216",
++ .cpu_port = 0,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&ar8216_dev);
++}
++
+--- /dev/null
++++ b/board/arcadyan/arv8539pw22/config.mk
+@@ -0,0 +1,8 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
++
+--- /dev/null
++++ b/board/arcadyan/arv8539pw22/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x134
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1400
++#define MC_DC22_VALUE 0x1414
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5B
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -520,6 +520,9 @@ Active mips mips32 danub
+ Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_brn arv752dpw22:SYS_BOOT_BRN -
+ Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_nor arv752dpw22:SYS_BOOT_NOR -
+ Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_ram arv752dpw22:SYS_BOOT_RAM -
++Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_brn arv8539pw22:SYS_BOOT_BRN -
++Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_nor arv8539pw22:SYS_BOOT_NOR -
++Active mips mips32 danube arcadyan arv8539pw22 arv8539pw22_ram arv8539pw22:SYS_BOOT_RAM -
+ Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle at gmail.com>
+ Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle at gmail.com>
+ Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka at openwrt.org>
+--- /dev/null
++++ b/include/configs/arv8539pw22.h
+@@ -0,0 +1,68 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka at openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV8539PW22"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Speedport W 504V Typ A"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_AR8216
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Burnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyS1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
--
1.9.1
More information about the Lede-dev
mailing list