[LEDE-DEV] WRT1900ACS Testing

Fri May 20 09:14:28 PDT 2016

> On 19-May-2016, at 4:07 PM, Dheeran Senthilvel <dheeranmech at gmail.com> wrote:
> 
> Hi, 
> I am currently running LEDE r274 build dated 18-May-2015. The build seems to be stable as of now, have been flashing the images ever since the snapshot was made available in the repository. Current Status of the device is as follows,
> 		
> 	# Wireless - both 2.4Ghz (@297MB/s) and 5Ghz(@1079MB/s) are working fine.(Speed tested using iperf). 
> 
> 	# USB - Not Tested
> 
> 	# LEDs - Only Power, WiFi & LAN leds are functioning. WAN & USB are not working (Similar OpenWrt Ticket - https://dev.openwrt.org/ticket/21825)
> 
> 	#Terminal Output
> 
> 
>> root at Shelby:~# lsmod
> 
> ahci_mvebu              1653  0 
> ahci_platform           2367  0 
> armada_thermal          3284  0 
> cfg80211              220675  2 mwlwifi
> compat                 13025  2 mac80211
> crc_ccitt                979  1 ppp_async
> ehci_hcd               34246  2 ehci_orion
> ehci_orion              2563  0 
> ehci_platform           4368  0 
> gpio_button_hotplug     5988  0 
> hwmon                   2026  3 tmp421
> i2c_core               18339  3 tmp421
> i2c_dev                 4551  0 
> i2c_mv64xxx             7033  0 
> ip6_tables              9625  3 ip6table_raw
> ip6t_REJECT             1056  2 
> ip6table_filter          682  1 
> ip6table_mangle         1042  1 
> ip6table_raw             648  0 
> ip_tables               9775  4 iptable_nat
> ipt_MASQUERADE           698  1 
> ipt_REJECT               914  2 
> iptable_filter           736  1 
> iptable_mangle           868  1 
> iptable_nat             1029  1 
> iptable_raw              702  0 
> ledtrig_usbdev          2307  0 
> libahci                19501  3 ahci_mvebu
> libahci_platform        4501  2 ahci_mvebu
> libata                127382  5 ahci_mvebu
> mac80211              401118  1 mwlwifi
> mmc_block              21754  0 
> mmc_core               77838  2 mvsdio
> mvsdio                  7362  0 
> mwlwifi                69628  0 
> nf_conntrack           60523  9 nf_nat_ipv4
> nf_conntrack_ipv4       6125 11 
> nf_conntrack_ipv6       6564  6 
> nf_conntrack_rtcache    2461  0 
> nf_defrag_ipv4           884  1 nf_conntrack_ipv4
> nf_defrag_ipv6         13185  1 nf_conntrack_ipv6
> nf_log_common           2407  2 nf_log_ipv4
> nf_log_ipv4             3218  0 
> nf_log_ipv6             3663  0 
> nf_nat                 10036  4 nf_nat_ipv4
> nf_nat_ipv4             4054  1 iptable_nat
> nf_nat_masquerade_ipv4    1509  1 ipt_MASQUERADE
> nf_nat_redirect          919  1 xt_REDIRECT
> nf_reject_ipv4          1911  1 ipt_REJECT
> nf_reject_ipv6          2236  1 ip6t_REJECT
> nls_base                5190  1 usbcore
> ppp_async               6521  0 
> ppp_generic            19930  3 pppoe
> pppoe                   8047  0 
> pppox                   1239  1 pppoe
> pwm_fan                 2840  0 
> sata_mv                26825  0 
> scsi_mod               88117  3 usb_storage
> sd_mod                 23412  0 
> slhc                    4543  1 ppp_generic
> thermal_sys            20307  2 armada_thermal
> tmp421                  2500  0 
> usb_common              1676  1 usbcore
> usb_storage            37368  0 
> usbcore               120847  8 ledtrig_usbdev
> x_tables               10689 26 ipt_REJECT
> xhci_hcd               81489  2 xhci_plat_hcd
> xhci_pci                2324  0 
> xhci_plat_hcd           3897  0 
> xt_CT                   2797  0 
> xt_LOG                   851  0 
> xt_REDIRECT              825  0 
> xt_TCPMSS               2660  2 
> xt_comment               511 62 
> xt_conntrack            2516 16 
> xt_id                    506129 
> xt_limit                1241 20 
> xt_mac                   631  0 
> xt_mark                  704  0 
> xt_multiport            1308  0 
> xt_nat                  1329  0 
> xt_state                 801  0 
> xt_tcpudp               1800 10 
> xt_time                 1670  0 
> 
>> root at Shelby:~# cat /etc/config/system
> 
> config system
> 	option hostname 'Shelby'
> 	option timezone 'IST-5:30'
> 	option ttylogin '0'
> 
> config timeserver 'ntp'
> 	list server '0.openwrt.pool.ntp.org'
> 	list server '1.openwrt.pool.ntp.org'
> 	list server '2.openwrt.pool.ntp.org'
> 	list server '3.openwrt.pool.ntp.org'
> 	option enabled '1'
> 	option enable_server '0'
> 
> config led 'led_wan'
> 	option name 'WAN'
> 	option sysfs 'pca963x:shelby:white:wan'
> 	option trigger 'netdev'
> 	option mode 'link tx rx'
> 	option dev 'eth0'
> 
> config led 'led_usb2'
> 	option name 'USB2'
> 	option sysfs 'pca963x:shelby:white:usb2'
> 	option trigger 'usbdev'
> 	option interval '50'
> 	option dev '1-1'
> 
> config led 'led_usb3'
> 	option name 'USB3'
> 	option sysfs 'pca963x:shelby:white:usb3_1'
> 	option trigger 'usbdev'
> 	option interval '50'
> 	option dev '2-1'
> 
>> root at Shelby:~# ls /sys/class/leds
> shelby:white:power  shelby:white:sata
> 
> 
> Sorry Guys! Never Used mailing lists
Hi Guys,
	Found a solution to the problem of "LEDs not functioning” mentioned in the previous mail. The "kmod-leds-pca963x” which is the driver module responsible for LED's proper functioning seems to be build and present in the repo, but the makefile isn't packaging it in the image by default (Similar OpenWrt Ticket - https://dev.openwrt.org/ticket/21825). Some developer (if anyone does read my mail), please do the needed. All LED’s seem to work after the module is installed from the repo, following a reboot. 

	OpenWrt team hasn't change this even after the ticket was reopened. I suppose that won't be the case here.

Regards,
Dheeran