[LEDE-DEV] [PATCH] ramips: Add support for the NixCore X1 Module
L. D. Pinney
ldpinney at gmail.com
Wed Jun 29 19:20:41 PDT 2016
The NixCore X1 is a Ralink/MediaTek rt5350 WiFi Module.
http://nixcores.com/
Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
Acked-by: Drew Gaylo <drew at nixcores.com>
---
target/linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +++
target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/NIXCORE-16M.dts | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
target/linux/ramips/dts/NIXCORE-8M.dts | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
target/linux/ramips/image/rt305x.mk | 13 +++++++++++
target/linux/ramips/rt305x/profiles/nixcore.mk | 20 ++++++++++++++++
7 files changed, 212 insertions(+)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index dbb5fb4..5063ac8 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -77,6 +77,7 @@ ramips_setup_interfaces()
mt7628|\
mzk-750dhp|\
mzk-w300nh2|\
+ nixcore|\
oy-0001|\
pbr-m1|\
psg1208|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 10139d7..b6ccd5a 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -322,6 +322,9 @@ ramips_board_detect() {
*"NCS601W")
name="ncs601w"
;;
+ *"NixcoreX1")
+ name="nixcore-x1"
+ ;;
*"NW718")
name="nw718"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index e3bea00..c4d3c01 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -95,6 +95,7 @@ platform_check_image() {
mzk-w300nh2|\
mzk-wdpr|\
nbg-419n|\
+ nixcore|\
nw718|\
oy-0001|\
pbr-m1|\
diff --git a/target/linux/ramips/dts/NIXCORE-16M.dts b/target/linux/ramips/dts/NIXCORE-16M.dts
new file mode 100644
index 0000000..0ee8864
--- /dev/null
+++ b/target/linux/ramips/dts/NIXCORE-16M.dts
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "NixcoreX1", "ralink,rt5350-soc";
+ model = "NixcoreX1";
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+
+ palmbus at 10000000 {
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+
+ gpio1: gpio at 660 {
+ status = "okay";
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "led", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw at 10110000 {
+ mediatek,portmap = <0x2f>;
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+};
diff --git a/target/linux/ramips/dts/NIXCORE-8M.dts b/target/linux/ramips/dts/NIXCORE-8M.dts
new file mode 100644
index 0000000..a80d7fb
--- /dev/null
+++ b/target/linux/ramips/dts/NIXCORE-8M.dts
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "NixcoreX1", "ralink,rt5350-soc";
+ model = "NixcoreX1";
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+
+ palmbus at 10000000 {
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+
+ gpio1: gpio at 660 {
+ status = "okay";
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "led", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw at 10110000 {
+ mediatek,portmap = <0x2f>;
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+};
diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk
index da7fc46..6861ef3 100644
--- a/target/linux/ramips/image/rt305x.mk
+++ b/target/linux/ramips/image/rt305x.mk
@@ -100,6 +100,17 @@ define BuildFirmware/HLKRM04/initramfs
mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call imgname,$(1),$(2))-factory.bin;
endef
+nixcore_8mb_mtd_size=8060928
+nixcore_16mb_mtd_size=16449536
+define BuildFirmware/NIXCORE/squashfs
+ $(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(nixcore_8mb_mtd_size))
+ $(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(nixcore_16mb_mtd_size))
+endef
+define BuildFirmware/NIXCORE/initramfs
+ $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
+ $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
+endef
+
vocore_8mb_mtd_size=8060928
vocore_16mb_mtd_size=16449536
define BuildFirmware/VOCORE/squashfs
@@ -258,6 +269,7 @@ Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2
Image/Build/Profile/MZKWDPR=$(call BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR)
Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
nw718_mtd_size=3801088
+Image/Build/Profile/NIXCORE=$(call BuildFirmware/NIXCORE/$(1),$(1),nixcore,NIXCORE)
Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
Image/Build/Profile/M2M=$(call BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
Image/Build/Profile/MINIEMBPLUG=$(call BuildFirmware/Default8M/$(1),$(1),miniembplug,MINIEMBPLUG)
@@ -353,6 +365,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/MZKWDPR,$(1))
$(call Image/Build/Profile/NBG-419N,$(1))
$(call Image/Build/Profile/NCS601W,$(1))
+ $(call Image/Build/Profile/NIXCORE,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/MINIEMBWIFI,$(1))
$(call Image/Build/Profile/MINIEMBPLUG,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/nixcore.mk b/target/linux/ramips/rt305x/profiles/nixcore.mk
new file mode 100644
index 0000000..475053c
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/nixcore.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2016 lede-project.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/NIXCORE
+ NAME:=NixcoreX1
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-ohci kmod-usb2 \
+ kmod-i2c-core kmod-i2c-ralink \
+ kmod-spi-dev
+endef
+
+define Profile/NIXCORE/Description
+ Package set for Nixcore X1 board
+endef
+
+$(eval $(call Profile,NIXCORE))
More information about the Lede-dev
mailing list