[LEDE-DEV] [PATCH] ramips: Add support for the NixCore X1

John Crispin john at phrozen.org
Fri Jun 24 07:51:22 PDT 2016 


On 24/06/2016 16:39, Drew from NixCore wrote:
> The NixCore X1 is a Ralink/MediaTek rt5350 WiFi Module
> 
> Patch submission with assistance from LD Pinney, using
> simplier email client.
> 
> Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
> Signed-off-by: Drew Gaylo <drew at nixcore.com>

Your email client has replaced all tabs with spaces in this version.

	John

> ---
> 
> target/linux/ramips/base-files/etc/board.d/02_network | 1 +
> target/linux/ramips/base-files/lib/ramips.sh | 3 +++
> target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/NIXCOREX1-16M.dts | 93
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> target/linux/ramips/dts/NIXCOREX1-8M.dts | 93
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> target/linux/ramips/image/rt305x.mk | 10 ++++++++
> target/linux/ramips/mt7628/config-4.4 | 7 ++++++
> target/linux/ramips/rt305x/profiles/nixcore.mk | 20 +++++++++++++++
> 8 files changed, 228 insertions(+)
> 
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index dbb5fb4..5063ac8 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -77,6 +77,7 @@ ramips_setup_interfaces()
>  mt7628|\
>  mzk-750dhp|\
>  mzk-w300nh2|\
> +    nixcore|\
>  oy-0001|\
>  pbr-m1|\
>  psg1208|\
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index 10139d7..b6ccd5a 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -322,6 +322,9 @@ ramips_board_detect() {
>  *"NCS601W")
>   name="ncs601w"
>   ;;
> +    *"NixcoreX1")
> +     name="nixcore-x1"
> +     ;;
>  *"NW718")
>   name="nw718"
>   ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index e3bea00..c4d3c01 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -95,6 +95,7 @@ platform_check_image() {
>  mzk-w300nh2|\
>  mzk-wdpr|\
>  nbg-419n|\
> +    nixcore|\
>  nw718|\
>  oy-0001|\
>  pbr-m1|\
> diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts
> b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> new file mode 100644
> index 0000000..7d2a6a1
> --- /dev/null
> +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> @@ -0,0 +1,93 @@
> +/dts-v1/;
> +
> +#include "rt5350.dtsi"
> +
> +/ {
> +    compatible = "nixcorex1", "ralink,rt5350-soc";
> +    model = "NixcoreX1";
> +
> +    chosen{
> +     bootargs = "console=ttyS1,57600";
> +
> +     };
> +    };
> +
> +&gpio0{
> +    status = "okay";
> +};
> +
> +&gpio1{
> +    status = "okay";
> +};
> +
> +&i2c{
> +    status = "okay";
> +};
> +&uart{
> +    status = "okay";
> +    reset-names = "gpio uartf";
> +};
> +&spi0{
> +    status = "okay";
> +
> +    m25p80 at 0 {
> +     #address-cells = <1>;
> +     #size-cells = <1>;
> +     compatible = "jedec,spi-nor";
> +     reg = <0>;
> +     linux,modalias = "m25p80";
> +     spi-max-frequency = <10000000>;
> +
> +     partition at 0 {
> +     label = "uboot";
> +     reg = <0x0 0x30000>;
> +     read-only;
> +     };
> +
> +     partition at 30000 {
> +     label = "uboot-env";
> +     reg = <0x30000 0x10000>;
> +     read-only;
> +     };
> +
> +     factory: partition at 40000 {
> +     label = "factory";
> +     reg = <0x40000 0x10000>;
> +     read-only;
> +     };
> +
> +     partition at 50000 {
> +     label = "firmware";
> +     reg = <0x50000 0xfb0000>;
> + };
> + };
> +};
> +
> +&pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "jtag", "led", "spi_cs1";
> + ralink,function = "gpio";
> + };
> + };
> +};
> +
> +&ethernet {
> + mtd-mac-address = <&factory 0x4>;
> +};
> +
> +&esw {
> + ralink,portmap = <0x17>;
> +};
> +
> +&wmac {
> + ralink,mtd-eeprom = <&factory 0>;
> +};
> +
> +&ehci {
> + status = "okay";
> +};
> +
> +&ohci {
> + status = "okay";
> +};
> diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts
> b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> new file mode 100644
> index 0000000..dcfe73b
> --- /dev/null
> +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> @@ -0,0 +1,93 @@
> +/dts-v1/;
> +
> +#include "rt5350.dtsi"
> +
> +/ {
> +    compatible = "nixcorex1", "ralink,rt5350-soc";
> +    model = "NixcoreX1";
> +
> +    chosen{
> +     bootargs = "console=ttyS1,57600";
> +
> +     };
> +    };
> +
> +&gpio0{
> +    status = "okay";
> +};
> +
> +&gpio1{
> +    status = "okay";
> +};
> +
> +&i2c{
> +    status = "okay";
> +};
> +&uart{
> +    status = "okay";
> +    reset-names = "gpio uartf";
> +};
> +&spi0{
> +    status = "okay";
> +
> +    m25p80 at 0 {
> +     #address-cells = <1>;
> +     #size-cells = <1>;
> +     compatible = "jedec,spi-nor";
> +     reg = <0>;
> +     linux,modalias = "m25p80";
> +     spi-max-frequency = <10000000>;
> +
> +     partition at 0 {
> +     label = "uboot";
> +     reg = <0x0 0x30000>;
> +     read-only;
> +     };
> +
> +     partition at 30000 {
> +     label = "uboot-env";
> +     reg = <0x30000 0x10000>;
> +     read-only;
> +     };
> +
> +     factory: partition at 40000 {
> +     label = "factory";
> +     reg = <0x40000 0x10000>;
> +     read-only;
> +     };
> +
> +     partition at 50000 {
> +     label = "firmware";
> +     reg = <0x50000 0x7b0000>;
> + };
> + };
> +};
> +
> +&pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "jtag", "led", "spi_cs1";
> + ralink,function = "gpio";
> + };
> + };
> +};
> +
> +&ethernet {
> + mtd-mac-address = <&factory 0x4>;
> +};
> +
> +&esw {
> + ralink,portmap = <0x17>;
> +};
> +
> +&wmac {
> + ralink,mtd-eeprom = <&factory 0>;
> +};
> +
> +&ehci {
> + status = "okay";
> +};
> +
> +&ohci {
> + status = "okay";
> +};
> diff --git a/target/linux/ramips/image/rt305x.mk
> b/target/linux/ramips/image/rt305x.mk
> index da7fc46..6e7b71c 100644
> --- a/target/linux/ramips/image/rt305x.mk
> +++ b/target/linux/ramips/image/rt305x.mk
> @@ -100,6 +100,16 @@ define BuildFirmware/HLKRM04/initramfs
>  mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call
> imgname,$(1),$(2))-factory.bin;
> endef
> 
> +nixcore_8mb_mtd_size=8060928
> +nixcore_16mb_mtd_size=16449536
> +define BuildFirmware/NIXCORE/squashfs
> +    $(call
> BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(nixcore_8mb_mtd_size))
> 
> +    $(call
> BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(nixcore_16mb_mtd_size))
> 
> +endef
> +define BuildFirmware/NIXCORE/initramfs
> +    $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
> +    $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
> +
> vocore_8mb_mtd_size=8060928
> vocore_16mb_mtd_size=16449536
> define BuildFirmware/VOCORE/squashfs
> diff --git a/target/linux/ramips/rt305x/profiles/nixcore.mk
> b/target/linux/ramips/rt305x/profiles/nixcore.mk
> new file mode 100644
> index 0000000..54e13dc
> --- /dev/null
> +++ b/target/linux/ramips/rt305x/profiles/nixcore.mk
> @@ -0,0 +1,20 @@
> +#
> +# Copyright (C) 2016 lede-project.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/NIXCORE
> + NAME:=NixcoreX1
> + PACKAGES:=\
> + kmod-usb-core kmod-usb-ohci kmod-usb2 \
> + kmod-i2c-core kmod-i2c-ralink \
> + kmod-spi-dev
> +endef
> +
> +define Profile/NIXCORE/Description
> + Package set for Nixcore X1 board
> +endef
> +
> +$(eval $(call Profile,NIXCORE))
> 
> 
> 
> 
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev

More information about the Lede-dev mailing list