[LEDE-DEV] [PATCH] [ramips] Added NixCore X1 target V5
Drew from NixCore
drew at nixcores.com
Thu Jun 23 20:25:47 PDT 2016
John,
I am not sure what is causing the line wrap, the emails that I get from
the list don't have the line wrap but the list shows it.
Any suggestions?
Drew
On 06/16/2016 05:45 AM, John Crispin wrote:
> Hi,
>
> patch does not apply. please go here
>
> --> http://patchwork.ozlabs.org/patch/636150/
>
> click on "download mbox" and you will see that it is line wrapped at 80
> characters.
>
> John
>
>
> On 16/06/2016 02:37, Drew from NixCore wrote:
>> Added NixCore X1 ramips target http://nixcores.com. This builds 8M and
>> 16M images. V5 updates the patch to work with the latest source.git
>>
>> Signed-off-by: Drew Gaylo <drew at nixcores.com>
>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
>> b/target/linux/ramips/base-files/etc/board.d/02_network
>> index be1912a..ebcf619 100755
>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>> @@ -77,6 +77,7 @@ ramips_setup_interfaces()
>> mt7628|\
>> mzk-750dhp|\
>> mzk-w300nh2|\
>> + nixcore|\
>> oy-0001|\
>> pbr-m1|\
>> psg1208|\
>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
>> b/target/linux/ramips/base-files/lib/ramips.sh
>> index bd4f33d..340a628 100755
>> --- a/target/linux/ramips/base-files/lib/ramips.sh
>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
>> @@ -322,6 +322,9 @@ ramips_board_detect() {
>> *"NCS601W")
>> name="ncs601w"
>> ;;
>> + *"NixcoreX1")
>> + name="nixcore-x1"
>> + ;;
>> *"NW718")
>> name="nw718"
>> ;;
>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> index 0b3d8c7..8749c99 100755
>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> @@ -95,6 +95,7 @@ platform_check_image() {
>> mzk-w300nh2|\
>> mzk-wdpr|\
>> nbg-419n|\
>> + nixcore|\
>> nw718|\
>> oy-0001|\
>> pbr-m1|\
>> diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts
>> b/target/linux/ramips/dts/NIXCOREX1-16M.dts
>> new file mode 100644
>> index 0000000..2ffcbb2
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts
>> @@ -0,0 +1,95 @@
>> +/dts-v1/;
>> +
>> +/include/ "rt5350.dtsi"
>> +
>> +/ {
>> + compatible = "NixcoreX1", "ralink,rt5350-soc";
>> + model = "NixcoreX1";
>> +
>> + chosen{
>> + bootargs = "console=ttyS1,57600";
>> + };
>> +};
>> +
>> +&gpio0{
>> + status = "okay";
>> +};
>> +
>> +&gpio1{
>> + status = "okay";
>> +};
>> +
>> +&i2c{
>> + status = "okay";
>> +};
>> +&uart{
>> + status = "okay";
>> + /* Mix of uart and gpio */
>> + reset-names = "gpio uartf";
>> +};
>> +&spi0{
>> + status = "okay";
>> +
>> + m25p80 at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "s25fl064k";
>> + reg = <0>;
>> + linux,modalias = "m25p80", "s25fl064k";
>> + spi-max-frequency = <10000000>;
>> +
>> + partition at 0 {
>> + label = "uboot";
>> + reg = <0x0 0x30000>;
>> + read-only;
>> + };
>> +
>> + partition at 30000 {
>> + label = "uboot-env";
>> + reg = <0x30000 0x10000>;
>> + read-only;
>> + };
>> +
>> + factory: partition at 40000 {
>> + label = "factory";
>> + reg = <0x40000 0x10000>;
>> + read-only;
>> + };
>> +
>> + partition at 50000 {
>> + label = "firmware";
>> + reg = <0x50000 0xfb0000>;
>> + };
>> + };
>> +};
>> +
>> +&pinctrl {
>> + state_default: pinctrl0 {
>> + gpio {
>> + /* Associate the tjag, uartf and led groups with gpio */
>> + ralink,group = "jtag", "led", "spi_cs1";
>> + /* How do we set individual pins? */
>> + ralink,function = "gpio";
>> + };
>> + };
>> +};
>> +
>> +ðernet {
>> + mtd-mac-address = <&factory 0x4>;
>> +};
>> +
>> +&esw {
>> + ralink,portmap = <0x17>;
>> +};
>> +
>> +&wmac {
>> + ralink,mtd-eeprom = <&factory 0>;
>> +};
>> +
>> +&ehci {
>> + status = "okay";
>> +};
>> +
>> +&ohci {
>> + status = "okay";
>> +};
>> diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts
>> b/target/linux/ramips/dts/NIXCOREX1-8M.dts
>> new file mode 100644
>> index 0000000..ca557fd
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts
>> @@ -0,0 +1,95 @@
>> +/dts-v1/;
>> +
>> +/include/ "rt5350.dtsi"
>> +
>> +/ {
>> + compatible = "NixcoreX1", "ralink,rt5350-soc";
>> + model = "NixcoreX1";
>> +
>> + chosen{
>> + bootargs = "console=ttyS1,57600";
>> + };
>> +};
>> +
>> +&gpio0{
>> + status = "okay";
>> +};
>> +
>> +&gpio1{
>> + status = "okay";
>> +};
>> +
>> +&i2c{
>> + status = "okay";
>> +};
>> +&uart{
>> + status = "okay";
>> + /* Mix of uart and gpio */
>> + reset-names = "gpio uartf";
>> +};
>> +&spi0{
>> + status = "okay";
>> +
>> + m25p80 at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "s25fl064k";
>> + reg = <0>;
>> + linux,modalias = "m25p80", "s25fl064k";
>> + spi-max-frequency = <10000000>;
>> +
>> + partition at 0 {
>> + label = "uboot";
>> + reg = <0x0 0x30000>;
>> + read-only;
>> + };
>> +
>> + partition at 30000 {
>> + label = "uboot-env";
>> + reg = <0x30000 0x10000>;
>> + read-only;
>> + };
>> +
>> + factory: partition at 40000 {
>> + label = "factory";
>> + reg = <0x40000 0x10000>;
>> + read-only;
>> + };
>> +
>> + partition at 50000 {
>> + label = "firmware";
>> + reg = <0x50000 0x7b0000>;
>> + };
>> + };
>> +};
>> +
>> +&pinctrl {
>> + state_default: pinctrl0 {
>> + gpio {
>> + /* Associate the tjag, uartf and led groups with gpio */
>> + ralink,group = "jtag", "led", "spi_cs1";
>> + /* How do we set individual pins? */
>> + ralink,function = "gpio";
>> + };
>> + };
>> +};
>> +
>> +ðernet {
>> + mtd-mac-address = <&factory 0x4>;
>> +};
>> +
>> +&esw {
>> + ralink,portmap = <0x17>;
>> +};
>> +
>> +&wmac {
>> + ralink,mtd-eeprom = <&factory 0>;
>> +};
>> +
>> +&ehci {
>> + status = "okay";
>> +};
>> +
>> +&ohci {
>> + status = "okay";
>> +};
>> diff --git a/target/linux/ramips/image/rt305x.mk
>> b/target/linux/ramips/image/rt305x.mk
>> index da7fc46..db12a8e 100644
>> --- a/target/linux/ramips/image/rt305x.mk
>> +++ b/target/linux/ramips/image/rt305x.mk
>> @@ -100,6 +100,21 @@ define BuildFirmware/HLKRM04/initramfs
>> mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call
>> imgname,$(1),$(2))-factory.bin;
>> endef
>>
>> +# This is called to build the nixcore image. Build both 8MB and 16MB
>> +nixcore_8mb_mtd_size=8060928
>> +nixcore_16mb_mtd_size=16449536
>> +define BuildFirmware/NIXCOREX1/squashfs
>> +# Args are XXX, nixcore-mM and NIXCOREX1-xM
>> + $(call
>> BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(nixcore_8mb_mtd_size))
>>
>> + $(call
>> BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(nixcore_16mb_mtd_size))
>>
>> + # Can do somethings here after the build?
>> +endef
>> +define BuildFirmware/NIXCOREX1/initramfs
>> +# Args are XXXX, nixcore-mM and NIXCOREX1-xM
>> + $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
>> + $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
>> +endef
>> +
>> vocore_8mb_mtd_size=8060928
>> vocore_16mb_mtd_size=16449536
>> define BuildFirmware/VOCORE/squashfs
>> @@ -257,6 +272,7 @@ Image/Build/Profile/NBG-419N=$(call
>> BuildFirmware/Default4M/$(1),$(1),nbg-419n,N
>> Image/Build/Profile/MZKW300NH2=$(call
>> BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
>>
>> Image/Build/Profile/MZKWDPR=$(call
>> BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR)
>> Image/Build/Profile/NCS601W=$(call
>> BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
>> +Image/Build/Profile/NIXCOREX1=$(call
>> BuildFirmware/NIXCOREX1/$(1),$(1),nixcorex1,NIXCOREX1)
>> nw718_mtd_size=3801088
>> Image/Build/Profile/NW718=$(call
>> BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
>>
>> Image/Build/Profile/M2M=$(call
>> BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
>> @@ -353,6 +369,7 @@ define Image/Build/Profile/Default
>> $(call Image/Build/Profile/MZKWDPR,$(1))
>> $(call Image/Build/Profile/NBG-419N,$(1))
>> $(call Image/Build/Profile/NCS601W,$(1))
>> + $(call Image/Build/Profile/NIXCOREX1,$(1))
>> $(call Image/Build/Profile/NW718,$(1))
>> $(call Image/Build/Profile/MINIEMBWIFI,$(1))
>> $(call Image/Build/Profile/MINIEMBPLUG,$(1))
>> diff --git a/target/linux/ramips/rt305x/profiles/nixcore.mk
>> b/target/linux/ramips/rt305x/profiles/nixcore.mk
>> new file mode 100644
>> index 0000000..22dee9b
>> --- /dev/null
>> +++ b/target/linux/ramips/rt305x/profiles/nixcore.mk
>> @@ -0,0 +1,20 @@
>> +#
>> +# Copyright (C) 2014 OpenWrt.org
>> +#
>> +# This is free software, licensed under the GNU General Public License v2.
>> +# See /LICENSE for more information.
>> +#
>> +
>> +define Profile/NIXCOREX1
>> + NAME:=NixcoreX1
>> + PACKAGES:=\
>> + kmod-usb-core kmod-usb-ohci kmod-usb2 \
>> + kmod-i2c-core kmod-i2c-ralink \
>> + kmod-spi-dev
>> +endef
>> +
>> +define Profile/NIXCOREX1/Description
>> + Package set for Nixcore X1 board
>> +endef
>> +
>> +$(eval $(call Profile,NIXCOREX1))
>>
>>
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
More information about the Lede-dev
mailing list