[LEDE-DEV] [PATCH] ramips: add suport for ZBT APE522II
Roger Pueyo Centelles
roger.pueyo at guifi.net
Thu Jun 23 01:58:08 PDT 2016
The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has
64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with
802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac
MT7612E-based 5 GHz radio.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo at guifi.net>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 5 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/ZBT-APE522II.dts | 143 +++++++++++++++++++++
target/linux/ramips/image/mt7620.mk | 8 ++
6 files changed, 161 insertions(+)
create mode 100644 target/linux/ramips/dts/ZBT-APE522II.dts
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 3aac1e4..460253c 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -296,6 +296,11 @@ y1s)
set_usb_led "$board:blue:usb"
set_wifi_led "$board:blue:wifi"
;;
+zbt-ape522ii)
+ ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$board:green:wlan2g4" "wlan1"
+ ucidef_set_led_netdev "sys1" "wlan1" "$board:green:sys1" "wlan1" "tx rx"
+ ucidef_set_led_netdev "sys2" "wlan0" "$board:green:sys2" "wlan0" "tx rx"
+ ;;
zbt-wa05)
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
set_wifi_led "$board:blue:air"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index be1912a..dbb5fb4 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -224,6 +224,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "0:wan" "6 at eth0"
;;
+ zbt-ape522ii|\
zbt-we826|\
zbt-wr8305rt)
ucidef_add_switch "switch0" \
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index bd4f33d..10139d7 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -523,6 +523,9 @@ ramips_board_detect() {
*"Y1S")
name="y1s"
;;
+ *"ZBT-APE522II")
+ name="zbt-ape522ii"
+ ;;
*"ZBT-WA05")
name="zbt-wa05"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0b3d8c7..e3bea00 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -155,6 +155,7 @@ platform_check_image() {
x8|\
y1|\
y1s|\
+ zbt-ape522ii|\
zbt-wa05|\
zbt-we826|\
zbt-wg2626|\
diff --git a/target/linux/ramips/dts/ZBT-APE522II.dts b/target/linux/ramips/dts/ZBT-APE522II.dts
new file mode 100644
index 0000000..eff27c2
--- /dev/null
+++ b/target/linux/ramips/dts/ZBT-APE522II.dts
@@ -0,0 +1,143 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+/ {
+ compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
+ model = "ZBT-APE522II";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ sys1 {
+ label = "zbt-ape522ii:green:sys1";
+ gpios = <&gpio0 11 1>;
+ };
+
+ sys2 {
+ label = "zbt-ape522ii:green:sys2";
+ gpios = <&gpio0 12 1>;
+ };
+
+ sys3 {
+ label = "zbt-ape522ii:green:sys3";
+ gpios = <&gpio0 9 1>;
+ };
+
+ sys4 {
+ label = "zbt-ape522ii:green:sys4";
+ gpios = <&gpio0 14 1>;
+ };
+
+ wlan2g4 {
+ label = "zbt-ape522ii:green:wlan2g4";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 0>;
+ linux,code = <0x198>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ linux,modalias = "m25p80", "w25q64";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76 at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled", "i2c", "uartf", "wdt";
+ ralink,function = "gpio";
+ };
+
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 33f94a4..b1afb82 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -376,6 +376,14 @@ define Device/youku-yk1
endef
TARGET_DEVICES += youku-yk1
+define Device/zbt-ape522ii
+ DTS := ZBT-APE522II
+ IMAGE_SIZE := $(ralink_default_fw_size_8M)
+ DEVICE_TITLE := Zbtlink ZBT-APE522II
+ DEVICE_PACKAGES := kmod-mt76
+endef
+TARGET_DEVICES += zbt-ape522ii
+
define Device/zbt-wa05
DTS := ZBT-WA05
IMAGE_SIZE := $(ralink_default_fw_size_8M)
--
2.8.1
More information about the Lede-dev
mailing list