[LEDE-DEV] [PATCH] [ramips] Added NixCore X1 target V5

John Crispin john at phrozen.org
Thu Jun 16 04:45:40 PDT 2016


Hi,

patch does not apply. please go here

--> http://patchwork.ozlabs.org/patch/636150/

click on "download mbox" and you will see that it is line wrapped at 80
characters.

	John


On 16/06/2016 02:37, Drew from NixCore wrote:
> Added NixCore X1 ramips target http://nixcores.com.  This builds 8M and
> 16M images.  V5 updates the patch to work with the latest source.git
> 
> Signed-off-by: Drew Gaylo <drew at nixcores.com>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index be1912a..ebcf619 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -77,6 +77,7 @@ ramips_setup_interfaces()
>      mt7628|\
>      mzk-750dhp|\
>      mzk-w300nh2|\
> +    nixcore|\
>      oy-0001|\
>      pbr-m1|\
>      psg1208|\
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index bd4f33d..340a628 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -322,6 +322,9 @@ ramips_board_detect() {
>      *"NCS601W")
>          name="ncs601w"
>          ;;
> +    *"NixcoreX1")
> +        name="nixcore-x1"
> +        ;;
>      *"NW718")
>          name="nw718"
>          ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index 0b3d8c7..8749c99 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -95,6 +95,7 @@ platform_check_image() {
>      mzk-w300nh2|\
>      mzk-wdpr|\
>      nbg-419n|\
> +    nixcore|\
>      nw718|\
>      oy-0001|\
>      pbr-m1|\
> diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts
> b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> new file mode 100644
> index 0000000..2ffcbb2
> --- /dev/null
> +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> @@ -0,0 +1,95 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> +    compatible = "NixcoreX1", "ralink,rt5350-soc";
> +    model = "NixcoreX1";
> +
> +    chosen{
> +        bootargs = "console=ttyS1,57600";
> +    };
> +};
> +
> +&gpio0{
> +    status = "okay";
> +};
> +
> +&gpio1{
> +    status = "okay";
> +};
> +
> +&i2c{
> +    status = "okay";
> +};
> +&uart{
> +    status = "okay";
> +    /* Mix of uart and gpio */
> +    reset-names = "gpio uartf";
> +};
> +&spi0{
> +    status = "okay";
> +
> +    m25p80 at 0 {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        compatible = "s25fl064k";
> +        reg = <0>;
> +        linux,modalias = "m25p80", "s25fl064k";
> +        spi-max-frequency = <10000000>;
> +
> +        partition at 0 {
> +            label = "uboot";
> +            reg = <0x0 0x30000>;
> +            read-only;
> +        };
> +
> +        partition at 30000 {
> +            label = "uboot-env";
> +            reg = <0x30000 0x10000>;
> +            read-only;
> +        };
> +
> +        factory: partition at 40000 {
> +            label = "factory";
> +            reg = <0x40000 0x10000>;
> +            read-only;
> +        };
> +
> +        partition at 50000 {
> +            label = "firmware";
> +            reg = <0x50000 0xfb0000>;
> +        };
> +    };
> +};
> +
> +&pinctrl {
> +    state_default: pinctrl0 {
> +        gpio {
> +            /* Associate the tjag, uartf and led groups with gpio */
> +            ralink,group = "jtag", "led", "spi_cs1";
> +            /* How do we set individual pins? */
> +            ralink,function = "gpio";
> +        };
> +    };
> +};
> +
> +&ethernet {
> +    mtd-mac-address = <&factory 0x4>;
> +};
> +
> +&esw {
> +    ralink,portmap = <0x17>;
> +};
> +
> +&wmac {
> +    ralink,mtd-eeprom = <&factory 0>;
> +};
> +
> +&ehci {
> +    status = "okay";
> +};
> +
> +&ohci {
> +    status = "okay";
> +};
> diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts
> b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> new file mode 100644
> index 0000000..ca557fd
> --- /dev/null
> +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> @@ -0,0 +1,95 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> +    compatible = "NixcoreX1", "ralink,rt5350-soc";
> +    model = "NixcoreX1";
> +
> +    chosen{
> +        bootargs = "console=ttyS1,57600";
> +    };
> +};
> +
> +&gpio0{
> +    status = "okay";
> +};
> +
> +&gpio1{
> +    status = "okay";
> +};
> +
> +&i2c{
> +    status = "okay";
> +};
> +&uart{
> +    status = "okay";
> +    /* Mix of uart and gpio */
> +    reset-names = "gpio uartf";
> +};
> +&spi0{
> +    status = "okay";
> +
> +    m25p80 at 0 {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        compatible = "s25fl064k";
> +        reg = <0>;
> +        linux,modalias = "m25p80", "s25fl064k";
> +        spi-max-frequency = <10000000>;
> +
> +        partition at 0 {
> +            label = "uboot";
> +            reg = <0x0 0x30000>;
> +            read-only;
> +        };
> +
> +        partition at 30000 {
> +            label = "uboot-env";
> +            reg = <0x30000 0x10000>;
> +            read-only;
> +        };
> +
> +        factory: partition at 40000 {
> +            label = "factory";
> +            reg = <0x40000 0x10000>;
> +            read-only;
> +        };
> +
> +        partition at 50000 {
> +            label = "firmware";
> +            reg = <0x50000 0x7b0000>;
> +        };
> +    };
> +};
> +
> +&pinctrl {
> +    state_default: pinctrl0 {
> +        gpio {
> +            /* Associate the tjag, uartf and led groups with gpio */
> +            ralink,group = "jtag", "led", "spi_cs1";
> +            /* How do we set individual pins? */
> +            ralink,function = "gpio";
> +        };
> +    };
> +};
> +
> +&ethernet {
> +    mtd-mac-address = <&factory 0x4>;
> +};
> +
> +&esw {
> +    ralink,portmap = <0x17>;
> +};
> +
> +&wmac {
> +    ralink,mtd-eeprom = <&factory 0>;
> +};
> +
> +&ehci {
> +    status = "okay";
> +};
> +
> +&ohci {
> +    status = "okay";
> +};
> diff --git a/target/linux/ramips/image/rt305x.mk
> b/target/linux/ramips/image/rt305x.mk
> index da7fc46..db12a8e 100644
> --- a/target/linux/ramips/image/rt305x.mk
> +++ b/target/linux/ramips/image/rt305x.mk
> @@ -100,6 +100,21 @@ define BuildFirmware/HLKRM04/initramfs
>      mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call
> imgname,$(1),$(2))-factory.bin;
>  endef
> 
> +# This is called to build the nixcore image.  Build both 8MB and 16MB
> +nixcore_8mb_mtd_size=8060928
> +nixcore_16mb_mtd_size=16449536
> +define BuildFirmware/NIXCOREX1/squashfs
> +# Args are XXX, nixcore-mM and NIXCOREX1-xM
> +    $(call
> BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(nixcore_8mb_mtd_size))
> 
> +    $(call
> BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(nixcore_16mb_mtd_size))
> 
> +    # Can do somethings here after the build?
> +endef
> +define BuildFirmware/NIXCOREX1/initramfs
> +# Args are XXXX, nixcore-mM and NIXCOREX1-xM
> +    $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
> +    $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
> +endef
> +
>  vocore_8mb_mtd_size=8060928
>  vocore_16mb_mtd_size=16449536
>  define BuildFirmware/VOCORE/squashfs
> @@ -257,6 +272,7 @@ Image/Build/Profile/NBG-419N=$(call
> BuildFirmware/Default4M/$(1),$(1),nbg-419n,N
>  Image/Build/Profile/MZKW300NH2=$(call
> BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
> 
>  Image/Build/Profile/MZKWDPR=$(call
> BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR)
>  Image/Build/Profile/NCS601W=$(call
> BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
> +Image/Build/Profile/NIXCOREX1=$(call
> BuildFirmware/NIXCOREX1/$(1),$(1),nixcorex1,NIXCOREX1)
>  nw718_mtd_size=3801088
>  Image/Build/Profile/NW718=$(call
> BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
> 
>  Image/Build/Profile/M2M=$(call
> BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
> @@ -353,6 +369,7 @@ define Image/Build/Profile/Default
>      $(call Image/Build/Profile/MZKWDPR,$(1))
>      $(call Image/Build/Profile/NBG-419N,$(1))
>      $(call Image/Build/Profile/NCS601W,$(1))
> +    $(call Image/Build/Profile/NIXCOREX1,$(1))
>      $(call Image/Build/Profile/NW718,$(1))
>      $(call Image/Build/Profile/MINIEMBWIFI,$(1))
>      $(call Image/Build/Profile/MINIEMBPLUG,$(1))
> diff --git a/target/linux/ramips/rt305x/profiles/nixcore.mk
> b/target/linux/ramips/rt305x/profiles/nixcore.mk
> new file mode 100644
> index 0000000..22dee9b
> --- /dev/null
> +++ b/target/linux/ramips/rt305x/profiles/nixcore.mk
> @@ -0,0 +1,20 @@
> +#
> +# Copyright (C) 2014 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/NIXCOREX1
> +    NAME:=NixcoreX1
> +    PACKAGES:=\
> +        kmod-usb-core kmod-usb-ohci kmod-usb2 \
> +        kmod-i2c-core kmod-i2c-ralink \
> +        kmod-spi-dev
> +endef
> +
> +define Profile/NIXCOREX1/Description
> +    Package set for Nixcore X1 board
> +endef
> +
> +$(eval $(call Profile,NIXCOREX1))
> 
> 
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev



More information about the Lede-dev mailing list