[LEDE-DEV] [PATCH] [ramips] Added NixCore X1 target V4
Drew from NixCore
drew at nixcores.com
Wed Jun 15 17:15:52 PDT 2016
So it appears that this patch doesn't apply either. I have re-checked
out the latest source and made the changes manually rather than using tools.
This patch is invalid and I will be submitting V5. Please bear with me
as this is my first submission to LEDE
Drew
On 06/15/2016 04:35 PM, Drew from NixCore wrote:
> Added NixCore X1 ramips targethttp://nixcores.com.
> <http://nixcores.com./> This builds 8M and 16M images. V4 updates
> the patch to fix whitespace issues in V3
>
> Signed-off-by: Drew Gaylo <drew at nixcores.com>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index 4728c75..69c0125 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -77,6 +77,7 @@ ramips_setup_interfaces()
> mt7628|\
> mzk-750dhp|\
> mzk-w300nh2|\
> + nixcore|\
> oy-0001|\
> pbr-m1|\
> psg1208|\
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index cbe455d..76f0e43 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -316,6 +316,9 @@ ramips_board_detect() {
> *"NCS601W")
> name="ncs601w"
> ;;
> + *"NixcoreX1")
> + name="nixcore-x1"
> + ;;
> *"NW718")
> name="nw718"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index 91c9997..0094568 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -94,6 +94,7 @@ platform_check_image() {
> mzk-w300nh2|\
> mzk-wdpr|\
> nbg-419n|\
> + nixcore|\
> nw718|\
> oy-0001|\
> pbr-m1|\
> diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts
> b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> new file mode 100644
> index 0000000..1e1a205
> --- /dev/null
> +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> @@ -0,0 +1,182 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> + compatible = "NixcoreX1", "ralink,rt5350-soc";
> + model = "NixcoreX1";
> +
> + chosen{
> + bootargs = "console=ttyS1,57600";
> + };
> +
> + gpio-export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> +
> + gpio0 {
> + gpio-export,name = "gpio0";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 0 0>;
> + };
> + /* GPIOs 1-6 are I2C,SPI */
> +
> + /* GPIO 7-14 are uart1 */
> +
> + /* GPIOs 15 & 16 are uart2 */
> +
> + /* JTAG */
> + gpio17 {
> + /* JTAG_TDO */
> + gpio-export,name = "gpio17";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 17 0>;
> + };
> + gpio18 {
> + /* JTAG_TDI */
> + gpio-export,name = "gpio18";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 18 0>;
> + };
> + gpio19 {
> + /* JTAG_TMS */
> + gpio-export,name = "gpio19";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 19 0>;
> + };
> + gpio20 {
> + /* JTAG_TCLK */
> + gpio-export,name = "gpio20";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 20 0>;
> + };
> + gpio21 {
> + /* JTAG_TRST_N */
> + gpio-export,name = "gpio21";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 21 0>;
> + };
> +
> + /* ETH LEDs */
> + /*
> + gpio22 {
> + gpio-export,name = "gpio22";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 0 0>;
> + };
> + gpio23 {
> + gpio-export,name = "gpio23";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 1 0>;
> + };
> + gpio24 {
> + gpio-export,name = "gpio24";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 2 0>;
> + };
> + gpio25 {
> + gpio-export,name = "gpio25";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 3 0>;
> + };
> + */
> +
> + gpio26 {
> + /* ETH4_LED */
> + gpio-export,name = "gpio26";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 4 0>;
> + };
> +
> + gpio27 {
> + /* spi_cs1 */
> + gpio-export,name = "gpio27";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 5 0>;
> + };
> + };
> +
> +};
> +
> +&gpio0{
> + status = "okay";
> +};
> +
> +&gpio1{
> + status = "okay";
> +};
> +
> +&i2c{
> + status = "okay";
> +};
> +&uart{
> + status = "okay";
> + /* Mix of uart and gpio */
> + reset-names = "gpio uartf";
> +};
> +&spi0{
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "s25fl064k";
> + reg = <0>;
> + linux,modalias = "m25p80", "s25fl064k";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "uboot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "uboot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xfb0000>;
> + };
> + };
> +};
> +
> +&pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + /* Associate the tjag, uartf and led groups with gpio */
> + ralink,group = "jtag", "led", "spi_cs1";
> + /* How do we set individual pins? */
> + ralink,function = "gpio";
> + };
> + };
> +};
> +
> +ðernet {
> + mtd-mac-address = <&factory 0x4>;
> +};
> +
> +&esw {
> + ralink,portmap = <0x17>;
> +};
> +
> +&wmac {
> + ralink,mtd-eeprom = <&factory 0>;
> +};
> +
> +&ehci {
> + status = "okay";
> +};
> +
> +&ohci {
> + status = "okay";
> +};
> diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts
> b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> new file mode 100644
> index 0000000..c514860
> --- /dev/null
> +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> @@ -0,0 +1,183 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> + compatible = "NixcoreX1", "ralink,rt5350-soc";
> + model = "NixcoreX1";
> +
> + chosen{
> + bootargs = "console=ttyS1,57600";
> + };
> +
> + gpio-export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> +
> + gpio0 {
> + gpio-export,name = "gpio0";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 0 0>;
> + };
> + /* GPIOs 1-6 are I2C,SPI */
> +
> + /* GPIO 7-14 are uart1 */
> +
> + /* GPIOs 15 & 16 are uart2 */
> +
> + /* JTAG */
> + gpio17 {
> + /* JTAG_TDO */
> + gpio-export,name = "gpio17";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 17 0>;
> + };
> + gpio18 {
> + /* JTAG_TDI */
> + gpio-export,name = "gpio18";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 18 0>;
> + };
> + gpio19 {
> + /* JTAG_TMS */
> + gpio-export,name = "gpio19";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 19 0>;
> + };
> + gpio20 {
> + /* JTAG_TCLK */
> + gpio-export,name = "gpio20";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 20 0>;
> + };
> + gpio21 {
> + /* JTAG_TRST_N */
> + gpio-export,name = "gpio21";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 21 0>;
> + };
> +
> + /* ETH LEDs */
> + /*
> + gpio22 {
> + gpio-export,name = "gpio22";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 0 0>;
> + };
> + gpio23 {
> + gpio-export,name = "gpio23";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 1 0>;
> + };
> + gpio24 {
> + gpio-export,name = "gpio24";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 2 0>;
> + };
> + gpio25 {
> + gpio-export,name = "gpio25";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 3 0>;
> + };
> + */
> +
> + gpio26 {
> + /* ETH4_LED */
> + gpio-export,name = "gpio26";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 4 0>;
> + };
> +
> + gpio27 {
> + /* spi_cs1 */
> + gpio-export,name = "gpio27";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 5 0>;
> + };
> + };
> +
> +};
> +
> +&gpio0{
> + status = "okay";
> +};
> +
> +&gpio1{
> + status = "okay";
> +};
> +
> +&i2c{
> + status = "okay";
> +};
> +&uart{
> + status = "okay";
> + /* Mix of uart and gpio */
> + reset-names = "gpio uartf";
> +};
> +&spi0{
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "s25fl064k";
> + reg = <0>;
> + linux,modalias = "m25p80", "s25fl064k";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "uboot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "uboot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0x7b0000>;
> + };
> + };
> +};
> +
> +&pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + /* Associate the tjag, uartf and led groups with gpio */
> + ralink,group = "jtag", "led", "spi_cs1";
> + /* How do we set individual pins? */
> + ralink,function = "gpio";
> + };
> + };
> +};
> +
> +ðernet {
> + mtd-mac-address = <&factory 0x4>;
> +};
> +
> +&esw {
> + ralink,portmap = <0x17>;
> +};
> +
> +&wmac {
> + ralink,mtd-eeprom = <&factory 0>;
> +};
> +
> +&ehci {
> + status = "okay";
> +};
> +
> +&ohci {
> + status = "okay";
> +};
> +
> diff --git a/target/linux/ramips/image/rt305x.mk
> b/target/linux/ramips/image/rt305x.mk
> index da7fc46..db12a8e 100644
> --- a/target/linux/ramips/image/rt305x.mk
> +++ b/target/linux/ramips/image/rt305x.mk
> @@ -100,6 +100,21 @@ define BuildFirmware/HLKRM04/initramfs
> mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call
> imgname,$(1),$(2))-factory.bin;
> endef
>
> +# This is called to build the nixcore image. Build both 8MB and 16MB
> +nixcore_8mb_mtd_size=8060928
> +nixcore_16mb_mtd_size=16449536
> +define BuildFirmware/NIXCOREX1/squashfs
> +# Args are XXX, nixcore-mM and NIXCOREX1-xM
> + $(call
> BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(nixcore_8mb_mtd_size))
> + $(call
> BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(nixcore_16mb_mtd_size))
> + # Can do somethings here after the build?
> +endef
> +define BuildFirmware/NIXCOREX1/initramfs
> +# Args are XXXX, nixcore-mM and NIXCOREX1-xM
> + $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
> + $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
> +endef
> +
> vocore_8mb_mtd_size=8060928
> vocore_16mb_mtd_size=16449536
> define BuildFirmware/VOCORE/squashfs
> @@ -257,6 +272,7 @@ Image/Build/Profile/NBG-419N=$(call
> BuildFirmware/Default4M/$(1),$(1),nbg-419n,N
> Image/Build/Profile/MZKW300NH2=$(call
> BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
> Image/Build/Profile/MZKWDPR=$(call
> BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR)
> Image/Build/Profile/NCS601W=$(call
> BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
> +Image/Build/Profile/NIXCOREX1=$(call
> BuildFirmware/NIXCOREX1/$(1),$(1),nixcorex1,NIXCOREX1)
> nw718_mtd_size=3801088
> Image/Build/Profile/NW718=$(call
> BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
> Image/Build/Profile/M2M=$(call
> BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
> @@ -353,6 +369,7 @@ define Image/Build/Profile/Default
> $(call Image/Build/Profile/MZKWDPR,$(1))
> $(call Image/Build/Profile/NBG-419N,$(1))
> $(call Image/Build/Profile/NCS601W,$(1))
> + $(call Image/Build/Profile/NIXCOREX1,$(1))
> $(call Image/Build/Profile/NW718,$(1))
> $(call Image/Build/Profile/MINIEMBWIFI,$(1))
> $(call Image/Build/Profile/MINIEMBPLUG,$(1))
> diff --git a/target/linux/ramips/rt305x/profiles/nixcore.mk
> b/target/linux/ramips/rt305x/profiles/nixcore.mk
> new file mode 100644
> index 0000000..22dee9b
> --- /dev/null
> +++ b/target/linux/ramips/rt305x/profiles/nixcore.mk
> @@ -0,0 +1,20 @@
> +#
> +# Copyright (C) 2014 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public
> License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/NIXCOREX1
> + NAME:=NixcoreX1
> + PACKAGES:=\
> + kmod-usb-core kmod-usb-ohci kmod-usb2 \
> + kmod-i2c-core kmod-i2c-ralink \
> + kmod-spi-dev
> +endef
> +
> +define Profile/NIXCOREX1/Description
> + Package set for Nixcore X1 board
> +endef
> +
> +$(eval $(call Profile,NIXCOREX1))
>
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
More information about the Lede-dev
mailing list