[LEDE-DEV] [PATCH] [ramips] Added NixCore X1 target V3
Drew from NixCore
drew at nixcores.com
Tue Jun 14 11:56:55 PDT 2016
John,
I originally was working on a git clone of the repo master branch from
June 5th. https://github.com/nixcore/lede-fork1 Rather than do a git
pull request I just generated the patch for the mailing list. I've
applied the same patch (via git apply) to the current HEAD of source.git
repo and while there appear to be some whitespace warnings the patch
applies correctly from the .patch file. Maybe the formatting got messed
up in the submit.
Drew
On 06/10/2016 02:38 AM, John Crispin wrote:
>
> On 09/06/2016 23:36, Drew from NixCore wrote:
>> I have no problem with a common dtsi, can I get these changes in first
>> and then do the dtsi as I continue work?
>>
>> Drew
>>
>> On 06/09/2016 03:12 PM, Karl Palsson wrote:
>>> If the 8 and 16 meg files only differ in their memory, should
>>> they perhaps just have a common .dtsi file for them both? instead
>>> of duplicating the entire dts? I've snipped the only differences
>>> between them below...
>>>
>>> Sincerely,
>>> Karl P
>>>
>>>
>>> Drew from NixCore <drew at nixcores.com> wrote:
>>>> Added NixCore X1 ramips target http://nixcores.com. This builds
>>>> 8M and 16M images. V3 updates the dts to support LEDE updated
>>>> format
> Hi Drew,
>
> i just wanted to fix the dtsi stuff myself however the patch is
> whitespace broken and does not apply. i went on to manually fix the
> whitespace breakage to find that you did not generate this patch against
> our latest source.git and that it wont apply.
>
> which tree at what rev did you use to generate the patch ?
>
> John
>
>
>
>
>
>
>
>
>>>> Signed-off-by: Drew Gaylo <drew at nixcores.com>
>>>> diff --git
>>>> diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts
>>>> b/target/linux/ramips/dts/NIXCOREX1-16M.dts new file mode
>>>> 100644 index 0000000..1e1a205
>>>> --- /dev/null
>>>> +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts
>>> snip
>>>
>>>> + partition at 50000 {
>>>> + label = "firmware";
>>>> + reg = <0x50000 0xfb0000>;
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts
>>>> b/target/linux/ramips/dts/NIXCOREX1-8M.dts new file mode 100644
>>>> index 0000000..c514860
>>>> --- /dev/null
>>>> +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts
>>> snip
>>>
>>>> + partition at 50000 {
>>>> + label = "firmware";
>>>> + reg = <0x50000 0x7b0000>;
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>>
>>>>
>>>> _______________________________________________
>>>> Lede-dev mailing list
>>>> Lede-dev at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/lede-dev
>>
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
More information about the Lede-dev
mailing list