[LEDE-DEV] [PATCH] [ramips] Added NixCore X1 target V3

[Drew from NixCore]

I have no problem with a common dtsi, can I get these changes in first 
and then do the dtsi as I continue work?

Drew

On 06/09/2016 03:12 PM, Karl Palsson wrote:
> If the 8 and 16 meg files only differ in their memory, should
> they perhaps just have a common .dtsi file for them both? instead
> of duplicating the entire dts? I've snipped the only differences
> between them below...
>
> Sincerely,
> Karl P
>
>
> Drew from NixCore <drew at nixcores.com> wrote:
>> Added NixCore X1 ramips target http://nixcores.com. This builds
>> 8M and 16M images. V3 updates the dts to support LEDE updated
>> format
>>
>> Signed-off-by: Drew Gaylo <drew at nixcores.com>
>> diff --git
>> diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts
>> b/target/linux/ramips/dts/NIXCOREX1-16M.dts new file mode
>> 100644 index 0000000..1e1a205
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> snip
>
>> +        partition at 50000 {
>> +            label = "firmware";
>> +            reg = <0x50000 0xfb0000>;
>> +        };
>> +    };
>> +};
>> +
>> diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts
>> b/target/linux/ramips/dts/NIXCOREX1-8M.dts new file mode 100644
>> index 0000000..c514860
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> snip
>
>> +        partition at 50000 {
>> +            label = "firmware";
>> +            reg = <0x50000 0x7b0000>;
>> +        };
>> +    };
>> +};
>> +
>>
>>
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev