[LEDE-DEV] [PATCH] [ramips] Added NixCore X1 target V2
John Crispin
john at phrozen.org
Mon Jun 6 22:12:59 PDT 2016
Hi Drew,
this patch seems to use the old devicetree layout and image building
code. do you think you could rebase this and make it work ontop of
latest source.git or do you need help to do that ? this patch wont apply
as is.
another question, did you build this yourself or is this a rebranded
whitelabel product ? i think we already support this board (or one that
looks almost identical, need to see if i can find it in my router zoo today)
John
On 07/06/2016 02:16, Drew from NixCore wrote:
> Added NixCore X1 ramips target http://nixcores.com. This builds 8M and 16M
> images
>
> Signed-off-by: Drew Gaylo <drew at nixcores.com>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index 4728c75..69c0125 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -77,6 +77,7 @@ ramips_setup_interfaces()
> mt7628|\
> mzk-750dhp|\
> mzk-w300nh2|\
> + nixcore|\
> oy-0001|\
> pbr-m1|\
> psg1208|\
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index cbe455d..76f0e43 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -316,6 +316,9 @@ ramips_board_detect() {
> *"NCS601W")
> name="ncs601w"
> ;;
> + *"NixcoreX1")
> + name="nixcore-x1"
> + ;;
> *"NW718")
> name="nw718"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index 91c9997..0094568 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -94,6 +94,7 @@ platform_check_image() {
> mzk-w300nh2|\
> mzk-wdpr|\
> nbg-419n|\
> + nixcore|\
> nw718|\
> oy-0001|\
> pbr-m1|\
> diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts
> b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> new file mode 100644
> index 0000000..c7ec410
> --- /dev/null
> +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts
> @@ -0,0 +1,186 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> + compatible = "NixcoreX1", "ralink,rt5350-soc";
> + model = "NixcoreX1";
> +
> + palmbus at 10000000 {
> + /* Re-enable the gpio1 ports */
> + gpio1: gpio at 660 {
> + status = "okay";
> + };
> +
> + i2c at 900 {
> + status = "okay";
> + };
> + uart at 500 {
> + status = "okay";
> + /* Mix of uart and gpio */
> + reset-names = "gpio uartf";
> + };
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "s25fl064k";
> + reg = <0>;
> + linux,modalias = "m25p80", "s25fl064k";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "uboot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "uboot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0x7b0000>;
> + };
> + };
> +
> + spidev at 1 {
> + compatible = "linux,spidev";
> + spi-max-frequency = <10000000>;
> + reg = <1>;
> + };
> + };
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + /* Associate the tjag, uartf and led groups with gpio */
> + ralink,group = "jtag", "led", "spi_cs1";
> + /* How do we set individual pins? */
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + ethernet at 10100000 {
> + mtd-mac-address = <&factory 0x4>;
> + };
> +
> + esw at 10110000 {
> + ralink,portmap = <0x17>;
> + };
> +
> + wmac at 10180000 {
> + ralink,mtd-eeprom = <&factory 0>;
> + };
> +
> + ehci at 101c0000 {
> + status = "okay";
> + };
> +
> + ohci at 101c1000 {
> + status = "okay";
> + };
> +
> + chosen {
> + bootargs = "console=ttyS1,57600";
> + };
> + gpio-export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> +
> + gpio0 {
> + gpio-export,name = "gpio0";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 0 0>;
> + };
> +
> + /* GPIOs 1-6 are I2C,SPI */
> +
> + /* GPIO 7-14 are uart1 */
> +
> + /* GPIOs 15 & 16 are uart2 */
> +
> + /* JTAG */
> + gpio17 {
> + /* JTAG_TDO */
> + gpio-export,name = "gpio17";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 17 0>;
> + };
> + gpio18 {
> + /* JTAG_TDI */
> + gpio-export,name = "gpio18";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 18 0>;
> + };
> + gpio19 {
> + /* JTAG_TMS */
> + gpio-export,name = "gpio19";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 19 0>;
> + };
> + gpio20 {
> + /* JTAG_TCLK */
> + gpio-export,name = "gpio20";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 20 0>;
> + };
> + gpio21 {
> + /* JTAG_TRST_N */
> + gpio-export,name = "gpio21";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 21 0>;
> + };
> +
> + /* ETH LEDs */
> + /*
> + gpio22 {
> + gpio-export,name = "gpio22";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 0 0>;
> + };
> + gpio23 {
> + gpio-export,name = "gpio23";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 1 0>;
> + };
> + gpio24 {
> + gpio-export,name = "gpio24";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 2 0>;
> + };
> + gpio25 {
> + gpio-export,name = "gpio25";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 3 0>;
> + };
> + */
> + gpio26 {
> + /* ETH4_LED */
> + gpio-export,name = "gpio26";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 4 0>;
> + };
> +
> + gpio27 {
> + /* spi_cs1 */
> + gpio-export,name = "gpio27";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 5 0>;
> + };
> + };
> +
> +};
> diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts
> b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> new file mode 100644
> index 0000000..c7ec410
> --- /dev/null
> +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts
> @@ -0,0 +1,186 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> + compatible = "NixcoreX1", "ralink,rt5350-soc";
> + model = "NixcoreX1";
> +
> + palmbus at 10000000 {
> + /* Re-enable the gpio1 ports */
> + gpio1: gpio at 660 {
> + status = "okay";
> + };
> +
> + i2c at 900 {
> + status = "okay";
> + };
> + uart at 500 {
> + status = "okay";
> + /* Mix of uart and gpio */
> + reset-names = "gpio uartf";
> + };
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "s25fl064k";
> + reg = <0>;
> + linux,modalias = "m25p80", "s25fl064k";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "uboot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "uboot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0x7b0000>;
> + };
> + };
> +
> + spidev at 1 {
> + compatible = "linux,spidev";
> + spi-max-frequency = <10000000>;
> + reg = <1>;
> + };
> + };
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + /* Associate the tjag, uartf and led groups with gpio */
> + ralink,group = "jtag", "led", "spi_cs1";
> + /* How do we set individual pins? */
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + ethernet at 10100000 {
> + mtd-mac-address = <&factory 0x4>;
> + };
> +
> + esw at 10110000 {
> + ralink,portmap = <0x17>;
> + };
> +
> + wmac at 10180000 {
> + ralink,mtd-eeprom = <&factory 0>;
> + };
> +
> + ehci at 101c0000 {
> + status = "okay";
> + };
> +
> + ohci at 101c1000 {
> + status = "okay";
> + };
> +
> + chosen {
> + bootargs = "console=ttyS1,57600";
> + };
> + gpio-export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> +
> + gpio0 {
> + gpio-export,name = "gpio0";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 0 0>;
> + };
> +
> + /* GPIOs 1-6 are I2C,SPI */
> +
> + /* GPIO 7-14 are uart1 */
> +
> + /* GPIOs 15 & 16 are uart2 */
> +
> + /* JTAG */
> + gpio17 {
> + /* JTAG_TDO */
> + gpio-export,name = "gpio17";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 17 0>;
> + };
> + gpio18 {
> + /* JTAG_TDI */
> + gpio-export,name = "gpio18";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 18 0>;
> + };
> + gpio19 {
> + /* JTAG_TMS */
> + gpio-export,name = "gpio19";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 19 0>;
> + };
> + gpio20 {
> + /* JTAG_TCLK */
> + gpio-export,name = "gpio20";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 20 0>;
> + };
> + gpio21 {
> + /* JTAG_TRST_N */
> + gpio-export,name = "gpio21";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio0 21 0>;
> + };
> +
> + /* ETH LEDs */
> + /*
> + gpio22 {
> + gpio-export,name = "gpio22";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 0 0>;
> + };
> + gpio23 {
> + gpio-export,name = "gpio23";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 1 0>;
> + };
> + gpio24 {
> + gpio-export,name = "gpio24";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 2 0>;
> + };
> + gpio25 {
> + gpio-export,name = "gpio25";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 3 0>;
> + };
> + */
> + gpio26 {
> + /* ETH4_LED */
> + gpio-export,name = "gpio26";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 4 0>;
> + };
> +
> + gpio27 {
> + /* spi_cs1 */
> + gpio-export,name = "gpio27";
> + gpio-export,direction_may_change = <1>;
> + gpios = <&gpio1 5 0>;
> + };
> + };
> +
> +};
> diff --git a/target/linux/ramips/image/rt305x.mk
> b/target/linux/ramips/image/rt305x.mk
> index da7fc46..db12a8e 100644
> --- a/target/linux/ramips/image/rt305x.mk
> +++ b/target/linux/ramips/image/rt305x.mk
> @@ -100,6 +100,21 @@ define BuildFirmware/HLKRM04/initramfs
> mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call
> imgname,$(1),$(2))-factory.bin;
> endef
>
> +# This is called to build the nixcore image. Build both 8MB and 16MB
> +nixcore_8mb_mtd_size=8060928
> +nixcore_16mb_mtd_size=16449536
> +define BuildFirmware/NIXCOREX1/squashfs
> +# Args are XXX, nixcore-mM and NIXCOREX1-xM
> + $(call
> BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(nixcore_8mb_mtd_size))
>
> + $(call
> BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(nixcore_16mb_mtd_size))
>
> + # Can do somethings here after the build?
> +endef
> +define BuildFirmware/NIXCOREX1/initramfs
> +# Args are XXXX, nixcore-mM and NIXCOREX1-xM
> + $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
> + $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
> +endef
> +
> vocore_8mb_mtd_size=8060928
> vocore_16mb_mtd_size=16449536
> define BuildFirmware/VOCORE/squashfs
> @@ -257,6 +272,7 @@ Image/Build/Profile/NBG-419N=$(call
> BuildFirmware/Default4M/$(1),$(1),nbg-419n,N
> Image/Build/Profile/MZKW300NH2=$(call
> BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
>
> Image/Build/Profile/MZKWDPR=$(call
> BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR)
> Image/Build/Profile/NCS601W=$(call
> BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
> +Image/Build/Profile/NIXCOREX1=$(call
> BuildFirmware/NIXCOREX1/$(1),$(1),nixcorex1,NIXCOREX1)
> nw718_mtd_size=3801088
> Image/Build/Profile/NW718=$(call
> BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
>
> Image/Build/Profile/M2M=$(call
> BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
> @@ -353,6 +369,7 @@ define Image/Build/Profile/Default
> $(call Image/Build/Profile/MZKWDPR,$(1))
> $(call Image/Build/Profile/NBG-419N,$(1))
> $(call Image/Build/Profile/NCS601W,$(1))
> + $(call Image/Build/Profile/NIXCOREX1,$(1))
> $(call Image/Build/Profile/NW718,$(1))
> $(call Image/Build/Profile/MINIEMBWIFI,$(1))
> $(call Image/Build/Profile/MINIEMBPLUG,$(1))
> diff --git a/target/linux/ramips/rt305x/profiles/nixcore.mk
> b/target/linux/ramips/rt305x/profiles/nixcore.mk
> new file mode 100644
> index 0000000..22dee9b
> --- /dev/null
> +++ b/target/linux/ramips/rt305x/profiles/nixcore.mk
> @@ -0,0 +1,20 @@
> +#
> +# Copyright (C) 2014 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/NIXCOREX1
> + NAME:=NixcoreX1
> + PACKAGES:=\
> + kmod-usb-core kmod-usb-ohci kmod-usb2 \
> + kmod-i2c-core kmod-i2c-ralink \
> + kmod-spi-dev
> +endef
> +
> +define Profile/NIXCOREX1/Description
> + Package set for Nixcore X1 board
> +endef
> +
> +$(eval $(call Profile,NIXCOREX1))
>
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
More information about the Lede-dev
mailing list