[LEDE-DEV] [RFC/RFT 7/7] ath25: switch to generic failsafe iface setup

[Jonas Gorski]

We don't ship vconfig anymore and board.d sets up the lan interfaces
accordingly, so just drop the local version.

Signed-off-by: Jonas Gorski <jonas.gorski at gmail.com>
---
 .../lib/preinit/15_preinit_iface_atheros           | 35 ----------------------
 1 file changed, 35 deletions(-)
 delete mode 100644 target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros

diff --git a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
deleted file mode 100644
index 434103e..0000000
--- a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-
-# reset button only supported on ar5315+ at the moment
-preinit_ip() {
-	if [ -z "$pi_ifname" ]; then
-		grep -q 'Atheros AR231[567]' /proc/cpuinfo && {
-			if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
-			     -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
-				vconfig set_name_type DEV_PLUS_VID_NO_PAD
-				ifconfig eth0 up		
-				vconfig add eth0 1
-				ifname=eth0.1
-			else
-				ifname=eth0
-			fi
-			pi_ifname=$ifname
-		}
-	fi
-	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-		ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
-    	}
-}
-
-
-# reset button only supported on ar5315+ at the moment
-
-preinit_ip_deconfig() {
-	if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
-	        -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
-		vconfig rem eth0.1 2>/dev/null
-		ifconfig $pi_ifname down
-	elif [ -n "$pi_ifname" ]; then
-		ifconfig $pi_ifname 0.0.0.0
-	fi
-}
-- 
2.1.4