[LEDE-DEV] [PATCH] ramips: Rename TP-Link Archer C50 LEDs

[p.wassi at gmx.at]

From: P.Wassi <p.wassi at gmx.at>

Rename LEDs in TP-Link Archer C50 from [manufacturer name]
to [board name] ("tp-link" -> "c50")

Signed-off-by: P.Wassi <p.wassi at gmx.at>
---
Change done according to information in
https://lists.infradead.org/pipermail/lede-dev/2016-July/002050.html

linux/ramips/base-files/etc/board.d/01_leds |   10 +++++-----
linux/ramips/dts/ArcherC50.dts              |   10 +++++-----
2 files changed, 10 insertions(+), 10 deletions(-)

diff -rupN a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -79,11 +79,11 @@ broadway)
 	set_wifi_led "$board:red:wps_active"
 	;;
 c50)
-	ucidef_set_led_default "power" "power" "tp-link:blue:power" "0"
-	ucidef_set_led_netdev "lan" "lan" "tp-link:blue:lan" "eth0.2"
-	set_usb_led "tp-link:blue:usb"
-	ucidef_set_led_wlan "wlan2g" "wlan2g" "tp-link:blue:wlan2g" "phy1radio"
-	ucidef_set_led_wlan "wlan5g" "wlan5g" "tp-link:blue:wlan5g" "phy0radio"
+	ucidef_set_led_default "power" "power" "$board:blue:power" "0"
+	ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" "eth0.2"
+	set_usb_led "$board:blue:usb"
+	ucidef_set_led_wlan "wlan2g" "wlan2g" "$board:blue:wlan2g" "phy1radio"
+	ucidef_set_led_wlan "wlan5g" "wlan5g" "$board:blue:wlan5g" "phy0radio"
 	;;
 cf-wr800n)
 	ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1
diff -rupN a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts
--- a/target/linux/ramips/dts/ArcherC50.dts
+++ b/target/linux/ramips/dts/ArcherC50.dts
@@ -14,27 +14,27 @@
 		compatible = "gpio-leds";
 
 		lan {
-			label = "tp-link:blue:lan";
+			label = "c50:blue:lan";
 			gpios = <&gpio0 1 1>;
 		};
 
 		power {
-			label = "tp-link:blue:power";
+			label = "c50:blue:power";
 			gpios = <&gpio0 7 0>;
 		};
 
 		usb {
-			label = "tp-link:blue:usb";
+			label = "c50:blue:usb";
 			gpios = <&gpio0 9 1>;
 		};
 
 		wlan5g {
-			label = "tp-link:blue:wlan5g";
+			label = "c50:blue:wlan5g";
 			gpios = <&gpio0 11 1>;
 		};
 
 		wlan2g {
-			label = "tp-link:blue:wlan2g";
+			label = "c50:blue:wlan2g";
 			gpios = <&gpio3 0 1>;
 		};
 	};