[LEDE-DEV] fstools testing help

[Josua Mayer]

Hi John,

Am 08.07.2016 um 07:47 schrieb John Crispin:
> 
> On 07/07/2016 21:36, Josua Mayer wrote:
>> Hi John,
>>
>> Could you please point me at where you merged my 2 patches? I want to
>> ensure I am testing the same code that was causing segfaults.
>>
>> br
>> Josua Mayer
>>
> 
> I already dropped them.
: >_<
> 
> 	John
> 

Well short story: given following setup:
mmclko0p1: fat32 (zImage, dtb)
mmcblk0p2: ext4 (rootfs)
bootargs root=/dev/mmcblk0p2 ro
no segfaults when running mount_root
no memleaks reported by valgrind

Any ideas what might be going wrong?

>> Am 05.07.2016 um 14:33 schrieb Álvaro Fernández Rojas:
>>> Hi Josua
>>>
>>> Not mounted rw.
>>> Unfortunately I didn't have time to check it thoroughly and I didn't see any remarkable messages.
>>>
>>> – Álvaro.
>>>
>>> El 5/7/16 a las 14:31, Josua Mayer escribió:
>>>> Hi Álvaro,
>>>>
>>>> Am 05.07.2016 um 14:17 schrieb Álvaro Fernández Rojas:
>>>>> It fails when trying to boot a Raspberry Pi, and then it segfaults when calling mount_root without any parameters.\
>>>> How do you see it fail when it boots? Messages? / not mounted rw?
>>>>>
>>>>> – Álvaro
>>>>>
>>>>> El 5/7/16 a las 14:14, Josua Mayer escribió:
>>>>>> Hi John,
>>>>>>
>>>>>> Am 05.07.2016 um 09:44 schrieb John Crispin:
>>>>>>> On 30/06/2016 09:23, Álvaro Fernández Rojas wrote:
>>>>>>>> I will try to test it on RPi tonight.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Álvaro.
>>>>>>>>
>>>>>>>> El 30/6/16 a las 9:21, John Crispin escribió:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> i have just merged to fstools patches into my staging tree that address
>>>>>>>>> a double mount issue and add back ext4 support. the ext4 patch
>>>>>>>>> previously broke rPi and other ext4 targets, but i thini with josua's
>>>>>>>>> patch applied it should work. i have done some basic testing already my
>>>>>>>>> end but would like further etst coverage to make sure there are no
>>>>>>>>> hidden regressions
>>>>>>>>>
>>>>>>>>> things that should be tested are
>>>>>>>>>
>>>>>>>>> * does ext4 mount work on eMMC
>>>>>>>>> * does rootfs mount work on rPi
>>>>>>>>> * does extroot still work with flat mounts
>>>>>>>>> * does extroot still work with flat overlay mounts
>>>>>>>>>
>>>>>>>>> i have only tested the last one so far.
>>>>>>>>>
>>>>>>>>> 	John
>>>>>>>>>
>>>>>>> Hi Josua,
>>>>>>>
>>>>>>> after applying your patches, users of flat ext4 are seeing segfaults
>>>>>>> when calling mount_root
>>>>>> when manually calling mount_root? With which parameters?
>>>>>> I will certainly look into it though.
>>>>>>> 	John
>>>>
>>
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev
>>