[LEDE-DEV] can not install luci
Outback Dingo
outbackdingo at gmail.com
Tue Dec 27 06:20:26 PST 2016
On Tue, Dec 27, 2016 at 8:57 AM, B. Cook <bsdwebsol at gmail.com> wrote:
> I was ddwrt 24 hours ago.. was convinced to try openwrt; Simply amazed how
> much fast the same router was.
>
> Shot myself in the foot by being greedy and wanting to try lede..
>
> root at lede:~# uname -a
> Linux lede 4.4.39 #0 Sat Dec 24 13:55:45 2016 mips GNU/Linux
>
> root at lede:~# df -h
> Filesystem Size Used Available Use% Mounted on
> /dev/root 2.0M 2.0M 0 100% /rom
> tmpfs 61.2M 528.0K 60.7M 1% /tmp
> /dev/mtdblock8 28.4M 812.0K 27.6M 3% /overlay
> overlayfs:/overlay 28.4M 812.0K 27.6M 3% /
> tmpfs 512.0K 0 512.0K 0% /dev
>
> (looks like I got it installed after bricking and tftp recovering openwrt..)
>
> I run opkg update it puts things in /var/opkg-lists/ (great)
> root at lede:/tmp/opkg-lists# grep -ri luci *
> root at lede:/tmp/opkg-lists#
>
> root at lede:/tmp/opkg-lists# cat /proc/cpuinfo
> system type : Atheros AR7161 rev 2
> machine : Buffalo WZR-HP-AG300H/WZR-600DHP
> processor : 0
> cpu model : MIPS 24Kc V7.4
> BogoMIPS : 452.19
> wait instruction : yes
> microsecond timers : yes
> tlb_entries : 16
> extra interrupt vector : yes
> hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc,
> 0x0ffb, 0x0ffb]
> isa : mips1 mips2 mips32r1 mips32r2
> ASEs implemented : mips16
> shadow register sets : 1
> kscratch registers : 0
> package : 0
> core : 0
> VCED exceptions : not available
> VCEI exceptions : not available
>
> Thanks in advance..
make sure the luci feed is tuned on in opkg.conf and run it again
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
More information about the Lede-dev
mailing list