[LEDE-DEV] [PATCH 4/4] arc770: Introduce images for SD-cards
Alexey Brodkin
Alexey.Brodkin at synopsys.com
Wed Aug 24 07:48:12 PDT 2016
Historically on ARC we started from initramfs-based images because:
a) It was much easier to debug especially when toolchain and other
components were changing quite dynamically
b) It was our usual approach for embedded Linux
But now with ARC port of Lede/OpenWRT getting more stable and mature
we're ready for more real-life scenarios with FS permanently stored
on SD-card. This essentially benefits from ability to setup devices
that survive reboots with all settings and extra packages kept in place.
Still we keep an ability to build images with initramfs.
This allows us to use storage-less simulators for testing still.
Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
Cc: John Crispin <john at phrozen.org>
Cc: Jo-Philipp Wich <jo at mein.io>
---
target/linux/arc770/generic/profiles/01-minimal.mk | 15 ----
target/linux/arc770/generic/profiles/02-axs101.mk | 16 -----
.../linux/arc770/generic/profiles/03-nsim_700.mk | 15 ----
target/linux/arc770/generic/target.mk | 2 +-
target/linux/arc770/image/Config.in | 5 ++
target/linux/arc770/image/Makefile | 82 +++++++++++++++-------
target/linux/arc770/image/gen_axs10x_sdcard_img.sh | 33 +++++++++
target/linux/arc770/image/uEnv.txt | 7 ++
8 files changed, 102 insertions(+), 73 deletions(-)
delete mode 100644 target/linux/arc770/generic/profiles/01-minimal.mk
delete mode 100644 target/linux/arc770/generic/profiles/02-axs101.mk
delete mode 100644 target/linux/arc770/generic/profiles/03-nsim_700.mk
create mode 100644 target/linux/arc770/image/Config.in
create mode 100755 target/linux/arc770/image/gen_axs10x_sdcard_img.sh
create mode 100644 target/linux/arc770/image/uEnv.txt
diff --git a/target/linux/arc770/generic/profiles/01-minimal.mk b/target/linux/arc770/generic/profiles/01-minimal.mk
deleted file mode 100644
index c8968da..0000000
--- a/target/linux/arc770/generic/profiles/01-minimal.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Minimal
- NAME:=Minimal Profile (no drivers)
-endef
-
-define Profile/Minimal/Description
- Minimal package set compatible with most boards.
-endef
-$(eval $(call Profile,Minimal))
diff --git a/target/linux/arc770/generic/profiles/02-axs101.mk b/target/linux/arc770/generic/profiles/02-axs101.mk
deleted file mode 100644
index 3fb6526..0000000
--- a/target/linux/arc770/generic/profiles/02-axs101.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/axs101
- NAME:=Synopsys DesignWare AXS101
- PACKAGES:= kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ath9k-htc wpad-mini
-endef
-
-define Profile/axs101/Description
- Package set compatible with hardware using Synopsys DesignWare AXS101 boards.
-endef
-$(eval $(call Profile,axs101))
diff --git a/target/linux/arc770/generic/profiles/03-nsim_700.mk b/target/linux/arc770/generic/profiles/03-nsim_700.mk
deleted file mode 100644
index 843a342..0000000
--- a/target/linux/arc770/generic/profiles/03-nsim_700.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/nsim_700
- NAME:=Synopsys nSIM
-endef
-
-define Profile/nsim_700/Description
- Package set compatible with hardware using Synopsys nSIM 700 boards.
-endef
-$(eval $(call Profile,nsim_700))
diff --git a/target/linux/arc770/generic/target.mk b/target/linux/arc770/generic/target.mk
index eba5c3c..15f598e 100644
--- a/target/linux/arc770/generic/target.mk
+++ b/target/linux/arc770/generic/target.mk
@@ -1,5 +1,5 @@
BOARDNAME:=Generic
-FEATURES += ramdisk usb
+FEATURES += ramdisk usb ext4
define Target/Description
Build firmware images for generic ARC 770D based boards.
diff --git a/target/linux/arc770/image/Config.in b/target/linux/arc770/image/Config.in
new file mode 100644
index 0000000..52f68ba
--- /dev/null
+++ b/target/linux/arc770/image/Config.in
@@ -0,0 +1,5 @@
+config AXS10X_SD_BOOT_PARTSIZE
+ int "Boot (SD Card) filesystem partition size (in MB)"
+ depends on TARGET_arc770
+ default 20
+
diff --git a/target/linux/arc770/image/Makefile b/target/linux/arc770/image/Makefile
index 79ce71e..f5e43f5 100644
--- a/target/linux/arc770/image/Makefile
+++ b/target/linux/arc770/image/Makefile
@@ -11,46 +11,76 @@ include $(INCLUDE_DIR)/image.mk
# in memory from build to built. Thus we need to extract EP from vmlinux
# every time before generation of uImage.
define Build/calculate-ep
- $(eval KERNEL_ENTRY=$(shell $(KERNEL_CROSS)readelf -h $(LINUX_DIR)/vmlinux | grep "Entry point address" | grep -o 0x.*))
+ $(eval KERNEL_ENTRY=$(shell $(KERNEL_CROSS)readelf -h $(1) | grep "Entry point address" | grep -o 0x.*))
endef
-define Build/patch-dtb
- $(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb)
- $(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
+define Build/build-dtb
+ $(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$(DTS_DIR)/$(DEVICE_DTS).dtb)
endef
-# Shared device definition: applies to every defined device
-define Device/Default
- PROFILES = Default $$(DEVICE_PROFILE)
- KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
- DEVICE_PROFILE :=
+define Build/patch-dtb
+ $(STAGING_DIR_HOST)/bin/patch-dtb $@ $(DTS_DIR)/$(DEVICE_DTS).dtb
endef
-DEVICE_VARS += DEVICE_PROFILE
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+# Root FS built-in
define Device/vmlinux
- KERNEL_SUFFIX := .elf
- KERNEL_INITRAMFS := kernel-bin | patch-dtb
- KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
-endef
-
-define Device/uImage
- KERNEL_SUFFIX := -uImage
- KERNEL_INITRAMFS := kernel-bin | patch-dtb | calculate-ep | uImage none
- KERNEL_LOADADDR := 0x80000000
+ KERNEL_SUFFIX := .elf
+ KERNEL := kernel-bin | build-dtb | patch-dtb
+ KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
endef
-define Device/axs101
- $(call Device/uImage)
- DEVICE_PROFILE := axs101
- DEVICE_DTS := axs101
-endef
-TARGET_DEVICES += axs101
-
define Device/nsim
$(call Device/vmlinux)
DEVICE_PROFILE := nsim
DEVICE_DTS := nsim_700
endef
TARGET_DEVICES += nsim
+endif
+
+# Root FS on SD-card
+KERNEL_LOADADDR := 0x80000000
+DEVICE_DTS_LIST:= axs101
+FAT32_BLOCK_SIZE=1024
+FAT32_BLOCKS=$(shell echo $$(($(CONFIG_AXS10X_SD_BOOT_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
+
+define Image/Build/SDCard
+ rm -f $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img
+ mkdosfs $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img -C $(FAT32_BLOCKS)
+ mkimage -C none -A arc -T script -d uEnv.txt $(BIN_DIR)/uEnv.scr
+ mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(BIN_DIR)/uEnv.scr ::boot.scr
+ mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(DTS_DIR)/*.dtb ::
+ mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(BIN_DIR)/$(IMG_PREFIX)-uImage ::uImage
+
+ ./gen_axs10x_sdcard_img.sh \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-sdcard-vfat-$(1).img \
+ $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img \
+ $(KDIR)/root.$(1) \
+ $(CONFIG_AXS10X_SD_BOOT_PARTSIZE) \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE)
+
+ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
+ gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-sdcard-vfat-$(1).img
+endif
+endef
+
+define Image/BuildKernel
+ # Build unified uImage
+ $(call Build/calculate-ep, $(KDIR)/vmlinux.elf)
+ $(call Image/BuildKernel/MkuImage, \
+ none, $(KERNEL_LOADADDR), $(KERNEL_ENTRY), \
+ $(KDIR)/vmlinux, \
+ $(BIN_DIR)/$(IMG_PREFIX)-uImage \
+ )
+
+ # Build .dtb for all boards we may run on
+ $(foreach DEVICE_DTS,$(shell echo $(DEVICE_DTS_LIST)), $(call Build/build-dtb))
+endef
+
+define Image/Build
+ $(call Image/Build/$(1),$(1))
+ $(call Image/Build/SDCard,$(1))
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+endef
$(eval $(call BuildImage))
diff --git a/target/linux/arc770/image/gen_axs10x_sdcard_img.sh b/target/linux/arc770/image/gen_axs10x_sdcard_img.sh
new file mode 100755
index 0000000..9a6f93d
--- /dev/null
+++ b/target/linux/arc770/image/gen_axs10x_sdcard_img.sh
@@ -0,0 +1,33 @@
+#!/usr/bin/env bash
+
+#
+# Copyright (C) 2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+set -x
+[ $# -eq 5 ] || {
+ echo "SYNTAX: $0 <file> <bootfs image> <rootfs image> <bootfs size> <rootfs size>"
+ exit 1
+}
+
+OUTPUT="$1"
+BOOTFS="$2"
+ROOTFS="$3"
+BOOTFSSIZE="$4"
+ROOTFSSIZE="$5"
+
+head=4
+sect=63
+
+set `ptgen -o $OUTPUT -h $head -s $sect -l 1024 -t c -p ${BOOTFSSIZE}M -t 83 -p ${ROOTFSSIZE}M`
+
+BOOTOFFSET="$(($1 / 512))"
+BOOTSIZE="$(($2 / 512))"
+ROOTFSOFFSET="$(($3 / 512))"
+ROOTFSSIZE="$(($4 / 512))"
+
+dd bs=512 if="$BOOTFS" of="$OUTPUT" seek="$BOOTOFFSET" conv=notrunc
+dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFSOFFSET" conv=notrunc
diff --git a/target/linux/arc770/image/uEnv.txt b/target/linux/arc770/image/uEnv.txt
new file mode 100644
index 0000000..35549cb
--- /dev/null
+++ b/target/linux/arc770/image/uEnv.txt
@@ -0,0 +1,7 @@
+setenv kernel_addr_r 0x82000000
+setenv fdt_addr_r 0x83000000
+setenv loadkernel fatload mmc 0 \$(kernel_addr_r) uImage
+setenv loaddtb fatload mmc 0 \$(fdt_addr_r) \$(dts)
+setenv bootargs earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 root=/dev/mmcblk0p2 rootwait print-fatal-signals=1
+setenv uenvcmd run loadkernel\; run loaddtb\; bootm \$(kernel_addr_r) - \$(fdt_addr_r)
+run uenvcmd
--
2.7.4
More information about the Lede-dev
mailing list