[LEDE-DEV] [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq

[Daniel Niasoff]

Hi Mathias,

 ADSL works fine on chaos calmer and I cannot reproduce the issue, so it looks like it's a recently introduced issue.

Thanks for the idea, it should make it easier to pinpoint

Any idea's where the issue might be?

Thanks

Daniel

-----Original Message-----
From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On Behalf Of Daniel Niasoff
Sent: 09 August 2016 15:23
To: Mathias Kresin <dev at kresin.me>
Cc: openwrt-devel at lists.openwrt.org; lede-dev at lists.infradead.org
Subject: Re: [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq

Thanks Mathias, will generate a build.

Last time I tried chaos chalmer, I couldn't get VDSL to work (I personally use VDSL), it wouldn't get line sync, but I'll try  again and use different firmware if required.

Thanks

Daniel

-----Original Message-----
From: Mathias Kresin [mailto:dev at kresin.me] 
Sent: 09 August 2016 14:58
To: Daniel Niasoff <daniel at redactus.co.uk>
Subject: Re: [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq

Hey Daniel,


2016-08-09 10:17 GMT+02:00 Daniel Niasoff <daniel at redactus.co.uk>:
> Hi Martin/John,
>
> Can you give us an idea where to look. If I use an external modem in bridge mode and run PPPoE on the router then it works fine.

Can you reproduce the issue using the TD-W8970 chaos calmer image?
Beside the wireless, the image should work fine on the TD-W8980.

Just to make sure it isn't a recently introduced issue.

Mathias
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel