[LEDE-DEV] [PATCH v2] kernel: adm6996: set carrier status

[Mathias Kresin]

Due to the missing carrier status set, the interface wasn't usable on a
BTHOMEHUB2B after ip link down and up as it is done in preinit.

Signed-off-by: Mathias Kresin <dev at kresin.me>
---

 Changes in v2:
  - removed unreachable code

 target/linux/generic/files/drivers/net/phy/adm6996.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/target/linux/generic/files/drivers/net/phy/adm6996.c b/target/linux/generic/files/drivers/net/phy/adm6996.c
index a2ff2b0..2fe2ee7 100644
--- a/target/linux/generic/files/drivers/net/phy/adm6996.c
+++ b/target/linux/generic/files/drivers/net/phy/adm6996.c
@@ -1052,6 +1052,11 @@ static int adm6996_read_status(struct phy_device *phydev)
 	phydev->speed = SPEED_100;
 	phydev->duplex = DUPLEX_FULL;
 	phydev->link = 1;
+
+	phydev->state = PHY_RUNNING;
+	netif_carrier_on(phydev->attached_dev);
+	phydev->adjust_link(phydev->attached_dev);
+
 	return 0;
 }
 
-- 
2.7.4