[LEDE-DEV] restore or compile config backup from openwrt

[Yousong Zhou]

On 7 August 2016 at 19:36, Jochen Demmer <jochen at winteltosh.de> wrote:
> I'm sorry if my questions seems to stupid for you to answer, but I would
> have to ask again.
> I build with buildroot, flash to device, but everything I put in ./env/files
> won't get to the devices filesystem where I expect it to be.
> What I got is only default configuration files there.
>
> That procedure of putting files into ./env/files worked fine with openwrt's
> buildroot. Did you change default behaviour?
>
> Jochen
>

I am only aware of path `files/` (in toplevel dir, not `env/`) for
this purpose.  Does it work for you?

                yousong

>
> Am 11.07.16 um 10:10 schrieb Jochen Demmer:
>
>> Hi,
>>
>> would I have to expect problems when restoring a configuration backup from
>> a Chaos Calmer device?
>> I plan to upgrade some devices to lede but don't want to reconfigure them
>> manually.
>>
>> Also: What if I compile myself a lede firmware with buildroot and also use
>> old configuration files (/etc/config) from a openwrt based system? I would
>> put them into the corresponding files subdirectory of the buildroot path.
>> I just tried it with a Archer C7 v2 and the vlan configuration doesn't
>> seem to work.
>>
>> Thank you
>>
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev
>
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev