[LEDE-DEV] mkimage producing FIT images without data files

[J Mo]

Sorry, I forgot to include this stdout from running mkimage manually:

FIT description: LEDE FIT image for TEW827DRU
Created:         Sat Aug  6 16:01:44 2016
  Image 0 (script at 0)
   Description:  u-boot-HTTP firmware update script
   Created:      Sat Aug  6 16:01:44 2016
   Type:         Script
   Compression:  uncompressed
   Data Size:    93 Bytes = 0.09 kB = 0.00 MB
   Hash algo:    crc32
   Hash value:   9641b1ca
  Image 1 (ubi-image at 1)
   Description:  UBI rootfs image
   Created:      Sat Aug  6 16:01:44 2016
   Type:         Firmware
   Compression:  uncompressed
   Data Size:    168 Bytes = 0.16 kB = 0.00 MB
   Architecture: ARM
   Load Address: unavailable
   Hash algo:    crc32
   Hash value:   374daf15


Note the "Data Size: " fields being wrong. The real Image 0 file is 
200KB and Image 1 is 5.7MB.




On 08/06/2016 03:59 PM, J Mo wrote:
> Hello
>
> I am trying to get LEDE to build for a new device, and my device needs 
> a FIT image.
>
> However, mkimage appears to be putting out a FIT file without the 
> actual data files being included. All the rest of the FIT file 
> formatting looks right on cursory inspection, but the data files which 
> were to be included are missing.
>
> Any ideas?
>
> My .its looks like this:
>
>
> /dts-v1/;
> / {
>   description = "LEDE FIT image for TEW827DRU";
>   #address-cells = <1>;
>     images {
>       script at 0 {
>         data = 
> "/home/user/proj/lede/newrouter-ledeproj-try6/target/linux/ipq806x/image/flash-tew827dru.scr";
>         description = "u-boot-HTTP firmware update script";
>         type = "script";
>         compression = "none";
>         arch = "arm";
>         hash at 0 {
>           algo = "crc32";
>         };
>       };
>       ubi-image at 1 {
>         data = 
> "/home/user/proj/lede/newrouter-ledeproj-try6/build_dir/target-arm_cortex-a15+neon-vfpv4_musl-1.1.15_eabi/linux-ipq806x/tmp/lede-ipq806x-TEW827DRU-squashfs-factory.bin";
>         description = "UBI rootfs image";
>         type = "firmware";
>         compression = "none";
>         arch = "arm";
>         hash at 0 {
>           algo = "crc32";
>         };
>       };
>     };
>   };
>
>