[openwrt/openwrt] realtek: phy: fix RTL8214FC fibre/copper initialization

[LEDE Commits]

robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/372f2563f602363c0b68d5263039c5649490a175

commit 372f2563f602363c0b68d5263039c5649490a175
Author: Markus Stockhausen <markus.stockhausen at gmx.de>
AuthorDate: Sun Jan 18 22:09:00 2026 +0100

    realtek: phy: fix RTL8214FC fibre/copper initialization
    
    A phy is configured in two stages
    
    - phy_probe() for setup of structures
    - config_init() for device setup (after reset)
    
    RTL8214FC is a combo phy and the currently active port can be switched
    with the SFP helper functions that are triggered during SFP insertion
    and removal. In case a fibre SFP is inserted while booting the SFP
    trigger is run between the above mentioned stages. During the final
    setup in config_init() the phy is reset to the copper port. Thus no
    link is available on fibre and the SFP must be reinserted for normal
    operation.
    
    For a consistent behaviour the fibre/copper port setup must run before
    the SFP probing and not afterwards. Move the setup code from config_init()
    into phy_probe().
    
    Fixes: 10ae743 ("realtek: phy: simplify RTL8214FC configuration")
    Signed-off-by: Markus Stockhausen <markus.stockhausen at gmx.de>
    Link: https://github.com/openwrt/openwrt/pull/21582
    Signed-off-by: Robert Marko <robimarko at gmail.com>
---
 .../files-6.12/drivers/net/phy/rtl83xx-phy.c       | 33 +++++++++++-----------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/target/linux/realtek/files-6.12/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-6.12/drivers/net/phy/rtl83xx-phy.c
index b47e88aa98..4eb4d138a1 100644
--- a/target/linux/realtek/files-6.12/drivers/net/phy/rtl83xx-phy.c
+++ b/target/linux/realtek/files-6.12/drivers/net/phy/rtl83xx-phy.c
@@ -863,45 +863,45 @@ static int rtl8218b_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int rtl8214fc_config_init(struct phy_device *phydev)
+static int rtl8214fc_phy_probe(struct phy_device *phydev)
 {
 	static int regs[] = {16, 19, 20, 21};
 	int ret;
 
+	rtl821x_package_join(phydev, 4);
+
+	/*
+	 * Normally phy_probe() only initializes PHY structures and setup is run in
+	 * config_init(). The RTL8214FC needs configuration before SFP probing while
+	 * the preferred media is still copper. This way all SFP events (even before
+	 * the first config_init()) will find a consistent port state.
+	 */
+
 	/* Step 1 - package setup: Due to similar design reuse RTL8218B coding */
 	ret = rtl8218b_config_init(phydev);
 	if (ret)
 		return ret;
 
 	if (phydev->mdio.addr % 8 == 0) {
-		for (int port = 0; port < 4; port++) {
-			phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, 0x8);
-			/* setup basic fiber control in base phy and default to copper */
-			phy_write_paged(phydev, 0x266, regs[port], 0x0f95);
-			phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, 0x0);
-		}
+		/* Force all ports to copper */
+		phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL);
+		for (int port = 0; port < 4; port++)
+			phy_modify_paged(phydev, 0x266, regs[port], 0, GENMASK(11, 10));
 	}
 
 	/* Step 2 - port setup */
-	phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, 0x3);
+	phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
 	/* set fiber SerDes RX to negative edge */
 	phy_modify_paged(phydev, 0x8, 0x17, 0, BIT(14));
 	/* auto negotiation disable link on */
 	phy_modify_paged(phydev, 0x8, 0x14, 0, BIT(2));
 	/* disable fiber 100MBit */
 	phy_modify_paged(phydev, 0x8, 0x11, BIT(5), 0);
-	phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, 0x0);
+	phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
 
 	/* Disable EEE. 0xa5d/0x10 is the same as MDIO_MMD_AN / MDIO_AN_EEE_ADV */
 	phy_write_paged(phydev, 0xa5d, 0x10, 0x0000);
 
-	return 0;
-}
-
-static int rtl8214fc_phy_probe(struct phy_device *phydev)
-{
-	rtl821x_package_join(phydev, 4);
-
 	return phy_sfp_probe(phydev, &rtl8214fc_sfp_ops);
 }
 
@@ -920,7 +920,6 @@ static struct phy_driver rtl83xx_phy_driver[] = {
 		.match_phy_device = rtl8214fc_match_phy_device,
 		.name		= "Realtek RTL8214FC",
 		.config_aneg	= rtl8214fc_config_aneg,
-		.config_init	= rtl8214fc_config_init,
 		.get_features	= rtl8214fc_get_features,
 		.get_tunable    = rtl8214fc_get_tunable,
 		.probe		= rtl8214fc_phy_probe,