[openwrt/openwrt] rockchip: configure WAN port LED of Radxa E20C

[LEDE Commits]

dangole pushed a commit to openwrt/openwrt.git, branch openwrt-25.12:
https://git.openwrt.org/ee7acbc0ed56af00a985ae2480d8b0f76b7e3c62

commit ee7acbc0ed56af00a985ae2480d8b0f76b7e3c62
Author: Chukun Pan <amadeus at jmu.edu.cn>
AuthorDate: Mon Dec 15 21:08:05 2025 +0800

    rockchip: configure WAN port LED of Radxa E20C
    
    The WAN(eth1) port LED on the Radxa E20C is completely off.
    Since the r8169 driver supports configuring LEDs, using it.
    
    Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
    (cherry picked from commit dccfc109575eb8a7444e8bb5e6bcda2507230446)
---
 target/linux/rockchip/armv8/base-files/etc/board.d/01_leds | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/target/linux/rockchip/armv8/base-files/etc/board.d/01_leds b/target/linux/rockchip/armv8/base-files/etc/board.d/01_leds
index 6b3d62d31f..b37eaef9c9 100644
--- a/target/linux/rockchip/armv8/base-files/etc/board.d/01_leds
+++ b/target/linux/rockchip/armv8/base-files/etc/board.d/01_leds
@@ -35,11 +35,16 @@ friendlyarm,nanopi-r6s)
 	ucidef_set_led_netdev "lan1" "LAN1" "green:lan-1" "eth2"
 	ucidef_set_led_netdev "lan2" "LAN2" "green:lan-2" "eth0"
 	;;
-friendlyarm,nanopi-r76s|\
-radxa,e20c)
+friendlyarm,nanopi-r76s)
 	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
 	ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
 	;;
+radxa,e20c)
+	ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+	ucidef_set_led_netdev "wan-0" "WAN-0" "eth1-0::lan" "eth1" "link_100"
+	ucidef_set_led_netdev "wan-1" "WAN-1" "eth1-1::lan" "eth1" "link_1000"
+	;;
 radxa,e52c)
 	ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
 	ucidef_set_led_netdev "lan" "LAN" "green:lan" "lan"