[openwrt/openwrt] kernel: net: phy: realtek: replace patches with upstream backports
LEDE Commits
lede-commits at lists.infradead.org
Fri Jan 9 04:57:59 PST 2026
dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/2a7d374dcd52e3dce9fdfdcbd70602f3a75ff03b
commit 2a7d374dcd52e3dce9fdfdcbd70602f3a75ff03b
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Thu Jan 8 16:43:26 2026 +0000
kernel: net: phy: realtek: replace patches with upstream backports
Replace downstream patches with backports of commits accepted upstream.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
...-mmd_phy_read-and-mmd_phy_write-to-phyli.patch} | 20 +-
...ltek-fix-whitespace-in-struct-phy_driver-.patch | 229 +++++++++++++++++++++
...realtek-implement-configuring-in-band-an.patch} | 98 ++++-----
...tek-use-paged-access-for-MDIO_MMD_VEND2-.patch} | 82 ++++----
...ltek-get-rid-of-magic-number-in-rtlgen_re.patch | 30 +++
...altek-use-genphy_soft_reset-for-2.5G-PHYs.patch | 62 +++---
.../720-04-net-phy-realtek-setup-aldps.patch | 4 +-
...ltek-support-interrupt-also-for-C22-varia.patch | 20 +-
8 files changed, 409 insertions(+), 136 deletions(-)
diff --git a/target/linux/generic/pending-6.12/715-net-phy-export-mmd_phy_-functions.patch b/target/linux/generic/backport-6.12/750-v7.0-net-phy-move-mmd_phy_read-and-mmd_phy_write-to-phyli.patch
similarity index 71%
rename from target/linux/generic/pending-6.12/715-net-phy-export-mmd_phy_-functions.patch
rename to target/linux/generic/backport-6.12/750-v7.0-net-phy-move-mmd_phy_read-and-mmd_phy_write-to-phyli.patch
index 864dde0cef..5d6e0acfd1 100644
--- a/target/linux/generic/pending-6.12/715-net-phy-export-mmd_phy_-functions.patch
+++ b/target/linux/generic/backport-6.12/750-v7.0-net-phy-move-mmd_phy_read-and-mmd_phy_write-to-phyli.patch
@@ -1,16 +1,20 @@
+From 65de36f5eae1c540115bf8f705f853718e9b6451 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel at makrotopia.org>
-Date: Mon, 5 Jan 2026 14:51:47 +0000
-Subject: [PATCH] net: phy: export mmd_phy_read and mmd_phy_write to phylib.h
+Date: Mon, 5 Jan 2026 16:38:29 +0000
+Subject: [PATCH 3/5] net: phy: move mmd_phy_read and mmd_phy_write to phylib.h
Helper functions mmd_phy_read and mmd_phy_write are useful for PHYs
which require custom MMD access functions for some but not all MMDs.
+Move mmd_phy_read and mmd_phy_write function prototypes from
+phylib-internal.h to phylib.h to make them available for PHY drivers.
-This patch replaces pending upstream patch
-"net: phy: move mmd_phy_read and mmd_phy_write to phylib.h"
-for Linux 6.12.
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Andrew Lunn <andrew at lunn.ch>
+Link: https://patch.msgid.link/79169cd624a3572d426e42c7b13cd2654a35d0cb.1767630451.git.daniel@makrotopia.org
+Signed-off-by: Paolo Abeni <pabeni at redhat.com>
-See also
-https://patchwork.kernel.org/project/netdevbpf/patch/79169cd624a3572d426e42c7b13cd2654a35d0cb.1767630451.git.daniel@makrotopia.org/
+Note that this patch replaces the commit above as neither phylink.h nor
+phylink-internal.h exist in Linux 6.12.
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -542,8 +542,8 @@ static void mmd_phy_indirect(struct mii_
@@ -47,7 +51,7 @@ https://patchwork.kernel.org/project/netdevbpf/patch/79169cd624a3572d426e42c7b13
* __phy_read_mmd - Convenience function for reading a register
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -2054,6 +2054,11 @@ extern struct phy_driver genphy_c45_driv
+@@ -2027,6 +2027,11 @@ extern struct phy_driver genphy_c45_driv
/* The gen10g_* functions are the old Clause 45 stub */
int gen10g_config_aneg(struct phy_device *phydev);
diff --git a/target/linux/generic/backport-6.12/788-v7.0-net-phy-realtek-fix-whitespace-in-struct-phy_driver-.patch b/target/linux/generic/backport-6.12/788-v7.0-net-phy-realtek-fix-whitespace-in-struct-phy_driver-.patch
new file mode 100644
index 0000000000..e577166e90
--- /dev/null
+++ b/target/linux/generic/backport-6.12/788-v7.0-net-phy-realtek-fix-whitespace-in-struct-phy_driver-.patch
@@ -0,0 +1,229 @@
+From 50326b48f0cfbd9324668c5d2e08b39b59dc199f Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 5 Jan 2026 16:37:54 +0000
+Subject: [PATCH 1/5] net: phy: realtek: fix whitespace in struct phy_driver
+ initializers
+
+Consistently use tabs instead of spaces in struct phy_driver
+initializers.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
+Link: https://patch.msgid.link/42b0fac53c5c5646707ce3f3a6dacd2bc082a5b2.1767630451.git.daniel@makrotopia.org
+Signed-off-by: Paolo Abeni <pabeni at redhat.com>
+---
+ drivers/net/phy/realtek/realtek_main.c | 146 ++++++++++++-------------
+ 1 file changed, 73 insertions(+), 73 deletions(-)
+
+--- a/drivers/net/phy/realtek/realtek_main.c
++++ b/drivers/net/phy/realtek/realtek_main.c
+@@ -1976,7 +1976,7 @@ static irqreturn_t rtl8221b_handle_inter
+ static struct phy_driver realtek_drvs[] = {
+ {
+ PHY_ID_MATCH_EXACT(0x00008201),
+- .name = "RTL8201CP Ethernet",
++ .name = "RTL8201CP Ethernet",
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+@@ -2102,7 +2102,7 @@ static struct phy_driver realtek_drvs[]
+ .name = "RTL8226B_RTL8221B 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+- .config_init = rtl822xb_config_init,
++ .config_init = rtl822xb_config_init,
+ .get_rate_matching = rtl822xb_get_rate_matching,
+ .read_status = rtl822xb_read_status,
+ .suspend = genphy_suspend,
+@@ -2111,112 +2111,112 @@ static struct phy_driver realtek_drvs[]
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc838),
+- .name = "RTL8226-CG 2.5Gbps PHY",
+- .soft_reset = rtl822x_c45_soft_reset,
+- .get_features = rtl822x_c45_get_features,
+- .config_aneg = rtl822x_c45_config_aneg,
+- .config_init = rtl822x_config_init,
+- .read_status = rtl822xb_c45_read_status,
+- .suspend = genphy_c45_pma_suspend,
+- .resume = rtlgen_c45_resume,
++ .name = "RTL8226-CG 2.5Gbps PHY",
++ .soft_reset = rtl822x_c45_soft_reset,
++ .get_features = rtl822x_c45_get_features,
++ .config_aneg = rtl822x_c45_config_aneg,
++ .config_init = rtl822x_config_init,
++ .read_status = rtl822xb_c45_read_status,
++ .suspend = genphy_c45_pma_suspend,
++ .resume = rtlgen_c45_resume,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc848),
+- .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+- .get_features = rtl822x_get_features,
+- .config_aneg = rtl822x_config_aneg,
+- .config_init = rtl822xb_config_init,
++ .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
++ .get_features = rtl822x_get_features,
++ .config_aneg = rtl822x_config_aneg,
++ .config_init = rtl822xb_config_init,
+ .get_rate_matching = rtl822xb_get_rate_matching,
+- .read_status = rtl822xb_read_status,
+- .suspend = genphy_suspend,
+- .resume = rtlgen_resume,
+- .read_page = rtl821x_read_page,
+- .write_page = rtl821x_write_page,
++ .read_status = rtl822xb_read_status,
++ .suspend = genphy_suspend,
++ .resume = rtlgen_resume,
++ .read_page = rtl821x_read_page,
++ .write_page = rtl821x_write_page,
+ }, {
+ .match_phy_device = rtl8221b_vb_cg_c22_match_phy_device,
+- .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
++ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
+ .probe = rtl822x_probe,
+- .get_features = rtl822x_get_features,
+- .config_aneg = rtl822x_config_aneg,
+- .config_init = rtl822xb_config_init,
++ .get_features = rtl822x_get_features,
++ .config_aneg = rtl822x_config_aneg,
++ .config_init = rtl822xb_config_init,
+ .get_rate_matching = rtl822xb_get_rate_matching,
+- .read_status = rtl822xb_read_status,
+- .suspend = genphy_suspend,
+- .resume = rtlgen_resume,
+- .read_page = rtl821x_read_page,
+- .write_page = rtl821x_write_page,
++ .read_status = rtl822xb_read_status,
++ .suspend = genphy_suspend,
++ .resume = rtlgen_resume,
++ .read_page = rtl821x_read_page,
++ .write_page = rtl821x_write_page,
+ }, {
+ .match_phy_device = rtl8221b_vb_cg_c45_match_phy_device,
+- .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
++ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
+ .config_intr = rtl8221b_config_intr,
+ .handle_interrupt = rtl8221b_handle_interrupt,
+ .probe = rtl822x_probe,
+- .config_init = rtl822xb_config_init,
++ .config_init = rtl822xb_config_init,
+ .get_rate_matching = rtl822xb_get_rate_matching,
+- .get_features = rtl822x_c45_get_features,
+- .config_aneg = rtl822x_c45_config_aneg,
+- .read_status = rtl822xb_c45_read_status,
+- .suspend = genphy_c45_pma_suspend,
+- .resume = rtlgen_c45_resume,
++ .get_features = rtl822x_c45_get_features,
++ .config_aneg = rtl822x_c45_config_aneg,
++ .read_status = rtl822xb_c45_read_status,
++ .suspend = genphy_c45_pma_suspend,
++ .resume = rtlgen_c45_resume,
+ }, {
+ .match_phy_device = rtl8221b_vm_cg_c22_match_phy_device,
+- .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
++ .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
+ .probe = rtl822x_probe,
+- .get_features = rtl822x_get_features,
+- .config_aneg = rtl822x_config_aneg,
+- .config_init = rtl822xb_config_init,
++ .get_features = rtl822x_get_features,
++ .config_aneg = rtl822x_config_aneg,
++ .config_init = rtl822xb_config_init,
+ .get_rate_matching = rtl822xb_get_rate_matching,
+- .read_status = rtl822xb_read_status,
+- .suspend = genphy_suspend,
+- .resume = rtlgen_resume,
+- .read_page = rtl821x_read_page,
+- .write_page = rtl821x_write_page,
++ .read_status = rtl822xb_read_status,
++ .suspend = genphy_suspend,
++ .resume = rtlgen_resume,
++ .read_page = rtl821x_read_page,
++ .write_page = rtl821x_write_page,
+ }, {
+ .match_phy_device = rtl8221b_vm_cg_c45_match_phy_device,
+- .name = "RTL8221B-VM-CG 2.5Gbps PHY (C45)",
++ .name = "RTL8221B-VM-CG 2.5Gbps PHY (C45)",
+ .config_intr = rtl8221b_config_intr,
+ .handle_interrupt = rtl8221b_handle_interrupt,
+ .probe = rtl822x_probe,
+- .config_init = rtl822xb_config_init,
++ .config_init = rtl822xb_config_init,
+ .get_rate_matching = rtl822xb_get_rate_matching,
+- .get_features = rtl822x_c45_get_features,
+- .config_aneg = rtl822x_c45_config_aneg,
+- .read_status = rtl822xb_c45_read_status,
+- .suspend = genphy_c45_pma_suspend,
+- .resume = rtlgen_c45_resume,
++ .get_features = rtl822x_c45_get_features,
++ .config_aneg = rtl822x_c45_config_aneg,
++ .read_status = rtl822xb_c45_read_status,
++ .suspend = genphy_c45_pma_suspend,
++ .resume = rtlgen_c45_resume,
+ }, {
+ .match_phy_device = rtl8251b_c45_match_phy_device,
+- .name = "RTL8251B 5Gbps PHY",
++ .name = "RTL8251B 5Gbps PHY",
+ .probe = rtl822x_probe,
+- .get_features = rtl822x_get_features,
+- .config_aneg = rtl822x_config_aneg,
+- .read_status = rtl822x_read_status,
+- .suspend = genphy_suspend,
+- .resume = rtlgen_resume,
+- .read_page = rtl821x_read_page,
+- .write_page = rtl821x_write_page,
++ .get_features = rtl822x_get_features,
++ .config_aneg = rtl822x_config_aneg,
++ .read_status = rtl822x_read_status,
++ .suspend = genphy_suspend,
++ .resume = rtlgen_resume,
++ .read_page = rtl821x_read_page,
++ .write_page = rtl821x_write_page,
+ }, {
+ .match_phy_device = rtl_internal_nbaset_match_phy_device,
+- .name = "Realtek Internal NBASE-T PHY",
++ .name = "Realtek Internal NBASE-T PHY",
+ .flags = PHY_IS_INTERNAL,
+ .probe = rtl822x_probe,
+- .get_features = rtl822x_get_features,
+- .config_aneg = rtl822x_config_aneg,
+- .read_status = rtl822x_read_status,
+- .suspend = genphy_suspend,
+- .resume = rtlgen_resume,
+- .read_page = rtl821x_read_page,
+- .write_page = rtl821x_write_page,
++ .get_features = rtl822x_get_features,
++ .config_aneg = rtl822x_config_aneg,
++ .read_status = rtl822x_read_status,
++ .suspend = genphy_suspend,
++ .resume = rtlgen_resume,
++ .read_page = rtl821x_read_page,
++ .write_page = rtl821x_write_page,
+ .read_mmd = rtl822x_read_mmd,
+ .write_mmd = rtl822x_write_mmd,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001ccad0),
+ .name = "RTL8224 2.5Gbps PHY",
+ .flags = PHY_POLL_CABLE_TEST,
+- .get_features = rtl822x_c45_get_features,
+- .config_aneg = rtl822x_c45_config_aneg,
+- .read_status = rtl822x_c45_read_status,
+- .suspend = genphy_c45_pma_suspend,
+- .resume = rtlgen_c45_resume,
++ .get_features = rtl822x_c45_get_features,
++ .config_aneg = rtl822x_c45_config_aneg,
++ .read_status = rtl822x_c45_read_status,
++ .suspend = genphy_c45_pma_suspend,
++ .resume = rtlgen_c45_resume,
+ .cable_test_start = rtl8224_cable_test_start,
+ .cable_test_get_status = rtl8224_cable_test_get_status,
+ }, {
+@@ -2235,7 +2235,7 @@ static struct phy_driver realtek_drvs[]
+ }, {
+ PHY_ID_MATCH_EXACT(0x001ccb00),
+ .name = "RTL9000AA_RTL9000AN Ethernet",
+- .features = PHY_BASIC_T1_FEATURES,
++ .features = PHY_BASIC_T1_FEATURES,
+ .config_init = rtl9000a_config_init,
+ .config_aneg = rtl9000a_config_aneg,
+ .read_status = rtl9000a_read_status,
diff --git a/target/linux/generic/pending-6.12/720-02-net-phy-realtek-implement-configuring-in-band-an.patch b/target/linux/generic/backport-6.12/789-v7.0-net-phy-realtek-implement-configuring-in-band-an.patch
similarity index 59%
rename from target/linux/generic/pending-6.12/720-02-net-phy-realtek-implement-configuring-in-band-an.patch
rename to target/linux/generic/backport-6.12/789-v7.0-net-phy-realtek-implement-configuring-in-band-an.patch
index b0b56ac6e8..16e6de29a7 100644
--- a/target/linux/generic/pending-6.12/720-02-net-phy-realtek-implement-configuring-in-band-an.patch
+++ b/target/linux/generic/backport-6.12/789-v7.0-net-phy-realtek-implement-configuring-in-band-an.patch
@@ -1,22 +1,24 @@
-From 43a4dfb71e2d23bae10ae13b7314d0641321d35e Mon Sep 17 00:00:00 2001
+From 10fbd71fc5f9bef5018a35103d493307683ddca1 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel at makrotopia.org>
-Date: Sat, 3 Jan 2026 02:53:59 +0000
-Subject: [PATCH 2/2] net: phy: realtek: implement configuring in-band an
+Date: Mon, 5 Jan 2026 16:38:12 +0000
+Subject: [PATCH 2/5] net: phy: realtek: implement configuring in-band an
Implement the inband_caps() and config_inband() PHY driver methods to
allow configuring the use of in-band-status with SGMII and 2500Base-X on
RTL8226 and RTL8221B 2.5GE PHYs.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Link: https://patch.msgid.link/82a78a06d67be19e856d646cf880b2021ea9d837.1767630451.git.daniel@makrotopia.org
+Signed-off-by: Paolo Abeni <pabeni at redhat.com>
---
drivers/net/phy/realtek/realtek_main.c | 67 ++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -135,6 +135,15 @@
- #define RTL822X_VND2_TO_PAGE_REG(reg) (16 + (((reg) & GENMASK(3, 0)) >> 1))
- #define RTL822X_VND2_C22_REG(reg) (0xa400 + 2 * (reg))
+@@ -131,6 +131,15 @@
+ #define RTL822X_VND1_SERDES_CTRL3_MODE_SGMII 0x02
+ #define RTL822X_VND1_SERDES_CTRL3_MODE_2500BASEX 0x16
+#define RTL822X_VND1_SERDES_CMD 0x7587
+#define RTL822X_VND1_SERDES_CMD_WRITE BIT(1)
@@ -27,10 +29,10 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+#define RTL822X_VND1_SERDES_INBAND_ENABLE 0x70d0
+#define RTL822X_VND1_SERDES_DATA 0x7589
+
- #define RTL8221B_VND2_INER 0xa4d2
- #define RTL8221B_VND2_INER_LINK_STATUS BIT(4)
-
-@@ -1381,6 +1390,50 @@ static int rtl822xb_config_init(struct p
+ /* RTL822X_VND2_XXXXX registers are only accessible when phydev->is_c45
+ * is set, they cannot be accessed by C45-over-C22.
+ */
+@@ -1308,6 +1317,50 @@ static int rtl822xb_config_init(struct p
return rtl822x_set_serdes_option_mode(phydev, false);
}
@@ -67,7 +69,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+}
+
+static unsigned int rtl822x_inband_caps(struct phy_device *phydev,
-+ phy_interface_t interface)
++ phy_interface_t interface)
+{
+ switch (interface) {
+ case PHY_INTERFACE_MODE_2500BASEX:
@@ -81,66 +83,66 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
static int rtl822xb_get_rate_matching(struct phy_device *phydev,
phy_interface_t iface)
{
-@@ -2180,6 +2233,8 @@ static struct phy_driver realtek_drvs[]
+@@ -2103,6 +2156,8 @@ static struct phy_driver realtek_drvs[]
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
- .config_init = rtl822xb_config_init,
+ .config_init = rtl822xb_config_init,
+ .inband_caps = rtl822x_inband_caps,
+ .config_inband = rtl822x_config_inband,
.get_rate_matching = rtl822xb_get_rate_matching,
.read_status = rtl822xb_read_status,
.suspend = genphy_suspend,
-@@ -2195,6 +2250,8 @@ static struct phy_driver realtek_drvs[]
- .get_features = rtl822x_c45_get_features,
- .config_aneg = rtl822x_c45_config_aneg,
- .config_init = rtl822x_config_init,
+@@ -2116,6 +2171,8 @@ static struct phy_driver realtek_drvs[]
+ .get_features = rtl822x_c45_get_features,
+ .config_aneg = rtl822x_c45_config_aneg,
+ .config_init = rtl822x_config_init,
+ .inband_caps = rtl822x_inband_caps,
+ .config_inband = rtl822x_config_inband,
- .read_status = rtl822xb_c45_read_status,
- .suspend = genphy_c45_pma_suspend,
- .resume = rtlgen_c45_resume,
-@@ -2207,6 +2264,8 @@ static struct phy_driver realtek_drvs[]
- .get_features = rtl822x_get_features,
- .config_aneg = rtl822x_config_aneg,
- .config_init = rtl822xb_config_init,
+ .read_status = rtl822xb_c45_read_status,
+ .suspend = genphy_c45_pma_suspend,
+ .resume = rtlgen_c45_resume,
+@@ -2125,6 +2182,8 @@ static struct phy_driver realtek_drvs[]
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .config_init = rtl822xb_config_init,
+ .inband_caps = rtl822x_inband_caps,
+ .config_inband = rtl822x_config_inband,
.get_rate_matching = rtl822xb_get_rate_matching,
- .read_status = rtl822xb_read_status,
- .suspend = genphy_suspend,
-@@ -2223,6 +2282,8 @@ static struct phy_driver realtek_drvs[]
- .get_features = rtl822x_get_features,
- .config_aneg = rtl822x_config_aneg,
- .config_init = rtl822xb_config_init,
+ .read_status = rtl822xb_read_status,
+ .suspend = genphy_suspend,
+@@ -2138,6 +2197,8 @@ static struct phy_driver realtek_drvs[]
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .config_init = rtl822xb_config_init,
+ .inband_caps = rtl822x_inband_caps,
+ .config_inband = rtl822x_config_inband,
.get_rate_matching = rtl822xb_get_rate_matching,
- .read_status = rtl822xb_read_status,
- .suspend = genphy_suspend,
-@@ -2239,6 +2300,8 @@ static struct phy_driver realtek_drvs[]
- .soft_reset = rtl822x_c45_soft_reset,
+ .read_status = rtl822xb_read_status,
+ .suspend = genphy_suspend,
+@@ -2151,6 +2212,8 @@ static struct phy_driver realtek_drvs[]
+ .handle_interrupt = rtl8221b_handle_interrupt,
.probe = rtl822x_probe,
- .config_init = rtl822xb_config_init,
+ .config_init = rtl822xb_config_init,
+ .inband_caps = rtl822x_inband_caps,
+ .config_inband = rtl822x_config_inband,
.get_rate_matching = rtl822xb_get_rate_matching,
- .get_features = rtl822x_c45_get_features,
- .config_aneg = rtl822x_c45_config_aneg,
-@@ -2253,6 +2316,8 @@ static struct phy_driver realtek_drvs[]
- .get_features = rtl822x_get_features,
- .config_aneg = rtl822x_config_aneg,
- .config_init = rtl822xb_config_init,
+ .get_features = rtl822x_c45_get_features,
+ .config_aneg = rtl822x_c45_config_aneg,
+@@ -2164,6 +2227,8 @@ static struct phy_driver realtek_drvs[]
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .config_init = rtl822xb_config_init,
+ .inband_caps = rtl822x_inband_caps,
+ .config_inband = rtl822x_config_inband,
.get_rate_matching = rtl822xb_get_rate_matching,
- .read_status = rtl822xb_read_status,
- .suspend = genphy_suspend,
-@@ -2269,6 +2334,8 @@ static struct phy_driver realtek_drvs[]
- .soft_reset = rtl822x_c45_soft_reset,
+ .read_status = rtl822xb_read_status,
+ .suspend = genphy_suspend,
+@@ -2177,6 +2242,8 @@ static struct phy_driver realtek_drvs[]
+ .handle_interrupt = rtl8221b_handle_interrupt,
.probe = rtl822x_probe,
- .config_init = rtl822xb_config_init,
+ .config_init = rtl822xb_config_init,
+ .inband_caps = rtl822x_inband_caps,
+ .config_inband = rtl822x_config_inband,
.get_rate_matching = rtl822xb_get_rate_matching,
- .get_features = rtl822x_c45_get_features,
- .config_aneg = rtl822x_c45_config_aneg,
+ .get_features = rtl822x_c45_get_features,
+ .config_aneg = rtl822x_c45_config_aneg,
diff --git a/target/linux/generic/pending-6.12/720-00-net-phy-realtek-use-paged-access-for-MDIO_MMD_VEND2-.patch b/target/linux/generic/backport-6.12/790-v7.0-net-phy-realtek-use-paged-access-for-MDIO_MMD_VEND2-.patch
similarity index 66%
rename from target/linux/generic/pending-6.12/720-00-net-phy-realtek-use-paged-access-for-MDIO_MMD_VEND2-.patch
rename to target/linux/generic/backport-6.12/790-v7.0-net-phy-realtek-use-paged-access-for-MDIO_MMD_VEND2-.patch
index 165ec4c229..d84fb6af39 100644
--- a/target/linux/generic/pending-6.12/720-00-net-phy-realtek-use-paged-access-for-MDIO_MMD_VEND2-.patch
+++ b/target/linux/generic/backport-6.12/790-v7.0-net-phy-realtek-use-paged-access-for-MDIO_MMD_VEND2-.patch
@@ -1,25 +1,32 @@
-From a81850660c9fc259d090e9207f81e8e76d9494ce Mon Sep 17 00:00:00 2001
+From 1850ec20d6e71218c02329e5975591075dc972d3 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel at makrotopia.org>
-Date: Sun, 4 Jan 2026 10:13:29 +0000
-Subject: [PATCH] net: phy: realtek: use paged access for MDIO_MMD_VEND2 in C22
- mode
+Date: Mon, 5 Jan 2026 16:38:59 +0000
+Subject: [PATCH 4/5] net: phy: realtek: use paged access for MDIO_MMD_VEND2 in
+ C22 mode
+
+RTL822x cannot access MDIO_MMD_VEND2 via MII_MMD_CTRL/MII_MMD_DATA. A
+mapping to use paged access needs to be used instead. All other MMD
+devices can be accessed as usual.
-RTL822x cannot access MDIO_MMD_VEND2 via MII_MMD_CTRL/MII_MMD_DATA.
-A mapping to use paged access needs to be used instead.
-All other MMD devices can be accessed as usual.
Implement phy_read_mmd and phy_write_mmd using paged access for
MDIO_MMD_VEND2 in Clause-22 mode instead of relying on
-MII_MMD_CTRL/MII_MMD_DATA.
-This allows eg. rtl822x_config_aneg to work as expected in case the
-MDIO bus doesn't support Clause-45 access.
+MII_MMD_CTRL/MII_MMD_DATA. This allows eg. rtl822x_config_aneg to work
+as expected in case the MDIO bus doesn't support Clause-45 access.
Suggested-by: Bevan Weiss <bevan.weiss at gmail.com>
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
+Link: https://patch.msgid.link/25aab7f02dac7c6022171455523e3db1435b0881.1767630451.git.daniel@makrotopia.org
+Signed-off-by: Paolo Abeni <pabeni at redhat.com>
+---
+ drivers/net/phy/realtek/realtek_main.c | 91 +++++++++++++++++++++++++-
+ 1 file changed, 88 insertions(+), 3 deletions(-)
+
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -131,9 +131,8 @@
- #define RTL822X_VND1_SERDES_CTRL3_MODE_SGMII 0x02
- #define RTL822X_VND1_SERDES_CTRL3_MODE_2500BASEX 0x16
+@@ -140,9 +140,8 @@
+ #define RTL822X_VND1_SERDES_INBAND_ENABLE 0x70d0
+ #define RTL822X_VND1_SERDES_DATA 0x7589
-/* RTL822X_VND2_XXXXX registers are only accessible when phydev->is_c45
- * is set, they cannot be accessed by C45-over-C22.
@@ -29,7 +36,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
#define RTL822X_VND2_C22_REG(reg) (0xa400 + 2 * (reg))
#define RTL8221B_VND2_INER 0xa4d2
-@@ -1238,6 +1237,80 @@ static int rtl822x_probe(struct phy_devi
+@@ -1247,6 +1246,79 @@ static int rtl822x_probe(struct phy_devi
return 0;
}
@@ -105,12 +112,11 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+
+ return write_ret;
+}
-+
+
static int rtl822x_set_serdes_option_mode(struct phy_device *phydev, bool gen1)
{
bool has_2500, has_sgmii;
-@@ -2097,6 +2170,8 @@ static struct phy_driver realtek_drvs[]
+@@ -2150,6 +2222,8 @@ static struct phy_driver realtek_drvs[]
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
@@ -119,7 +125,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
}, {
.match_phy_device = rtl8221b_match_phy_device,
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
-@@ -2109,6 +2184,8 @@ static struct phy_driver realtek_drvs[]
+@@ -2164,6 +2238,8 @@ static struct phy_driver realtek_drvs[]
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
@@ -127,40 +133,40 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+ .write_mmd = rtl822xb_write_mmd,
}, {
PHY_ID_MATCH_EXACT(0x001cc838),
- .name = "RTL8226-CG 2.5Gbps PHY",
-@@ -2119,6 +2196,8 @@ static struct phy_driver realtek_drvs[]
- .read_status = rtl822xb_c45_read_status,
- .suspend = genphy_c45_pma_suspend,
- .resume = rtlgen_c45_resume,
+ .name = "RTL8226-CG 2.5Gbps PHY",
+@@ -2176,6 +2252,8 @@ static struct phy_driver realtek_drvs[]
+ .read_status = rtl822xb_c45_read_status,
+ .suspend = genphy_c45_pma_suspend,
+ .resume = rtlgen_c45_resume,
+ .read_mmd = rtl822xb_read_mmd,
+ .write_mmd = rtl822xb_write_mmd,
}, {
PHY_ID_MATCH_EXACT(0x001cc848),
- .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
-@@ -2131,6 +2210,8 @@ static struct phy_driver realtek_drvs[]
- .resume = rtlgen_resume,
- .read_page = rtl821x_read_page,
- .write_page = rtl821x_write_page,
+ .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+@@ -2190,6 +2268,8 @@ static struct phy_driver realtek_drvs[]
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ .read_mmd = rtl822xb_read_mmd,
+ .write_mmd = rtl822xb_write_mmd,
}, {
.match_phy_device = rtl8221b_vb_cg_c22_match_phy_device,
- .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
-@@ -2144,6 +2225,8 @@ static struct phy_driver realtek_drvs[]
- .resume = rtlgen_resume,
- .read_page = rtl821x_read_page,
- .write_page = rtl821x_write_page,
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
+@@ -2205,6 +2285,8 @@ static struct phy_driver realtek_drvs[]
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ .read_mmd = rtl822xb_read_mmd,
+ .write_mmd = rtl822xb_write_mmd,
}, {
.match_phy_device = rtl8221b_vb_cg_c45_match_phy_device,
- .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
-@@ -2170,6 +2253,8 @@ static struct phy_driver realtek_drvs[]
- .resume = rtlgen_resume,
- .read_page = rtl821x_read_page,
- .write_page = rtl821x_write_page,
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
+@@ -2235,6 +2317,8 @@ static struct phy_driver realtek_drvs[]
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ .read_mmd = rtl822xb_read_mmd,
+ .write_mmd = rtl822xb_write_mmd,
}, {
.match_phy_device = rtl8221b_vm_cg_c45_match_phy_device,
- .name = "RTL8221B-VM-CG 2.5Gbps PHY (C45)",
+ .name = "RTL8221B-VM-CG 2.5Gbps PHY (C45)",
diff --git a/target/linux/generic/backport-6.12/791-v7.0-net-phy-realtek-get-rid-of-magic-number-in-rtlgen_re.patch b/target/linux/generic/backport-6.12/791-v7.0-net-phy-realtek-get-rid-of-magic-number-in-rtlgen_re.patch
new file mode 100644
index 0000000000..992e660039
--- /dev/null
+++ b/target/linux/generic/backport-6.12/791-v7.0-net-phy-realtek-get-rid-of-magic-number-in-rtlgen_re.patch
@@ -0,0 +1,30 @@
+From d8489935f5979b72e73de585037fe6fde7088bc3 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel at makrotopia.org>
+Date: Mon, 5 Jan 2026 16:39:26 +0000
+Subject: [PATCH 5/5] net: phy: realtek: get rid of magic number in
+ rtlgen_read_status()
+
+Use newly introduced helper macros RTL822X_VND2_TO_PAGE and
+RTL822X_VND2_TO_PAGE_REG to access RTL_VEND2_PHYSR register over Clause-22
+paged access instead of using magic numbers.
+
+Signed-off-by: Daniel Golle <daniel at makrotopia.org>
+Reviewed-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
+Link: https://patch.msgid.link/a53d4577335fdda4d363db9bc4bf614fd3a56c9b.1767630451.git.daniel@makrotopia.org
+Signed-off-by: Paolo Abeni <pabeni at redhat.com>
+---
+ drivers/net/phy/realtek/realtek_main.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/phy/realtek/realtek_main.c
++++ b/drivers/net/phy/realtek/realtek_main.c
+@@ -1153,7 +1153,8 @@ static int rtlgen_read_status(struct phy
+ if (!phydev->link)
+ return 0;
+
+- val = phy_read_paged(phydev, 0xa43, 0x12);
++ val = phy_read_paged(phydev, RTL822X_VND2_TO_PAGE(RTL_VND2_PHYSR),
++ RTL822X_VND2_TO_PAGE_REG(RTL_VND2_PHYSR));
+ if (val < 0)
+ return val;
+
diff --git a/target/linux/generic/pending-6.12/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch b/target/linux/generic/pending-6.12/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch
index 8ee2628e0d..c1628c14b8 100644
--- a/target/linux/generic/pending-6.12/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch
+++ b/target/linux/generic/pending-6.12/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch
@@ -15,59 +15,59 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
-@@ -2163,6 +2163,7 @@ static struct phy_driver realtek_drvs[]
+@@ -2216,6 +2216,7 @@ static struct phy_driver realtek_drvs[]
}, {
.name = "RTL8226 2.5Gbps PHY",
.match_phy_device = rtl8226_match_phy_device,
-+ .soft_reset = genphy_soft_reset,
++ .soft_reset = genphy_soft_reset,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
-@@ -2175,6 +2176,7 @@ static struct phy_driver realtek_drvs[]
+@@ -2228,6 +2229,7 @@ static struct phy_driver realtek_drvs[]
}, {
.match_phy_device = rtl8221b_match_phy_device,
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
-+ .soft_reset = genphy_soft_reset,
++ .soft_reset = genphy_soft_reset,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
- .config_init = rtl822xb_config_init,
-@@ -2201,6 +2203,7 @@ static struct phy_driver realtek_drvs[]
+ .config_init = rtl822xb_config_init,
+@@ -2258,6 +2260,7 @@ static struct phy_driver realtek_drvs[]
}, {
PHY_ID_MATCH_EXACT(0x001cc848),
- .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
-+ .soft_reset = genphy_soft_reset,
- .get_features = rtl822x_get_features,
- .config_aneg = rtl822x_config_aneg,
- .config_init = rtl822xb_config_init,
-@@ -2215,6 +2218,7 @@ static struct phy_driver realtek_drvs[]
+ .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
++ .soft_reset = genphy_soft_reset,
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .config_init = rtl822xb_config_init,
+@@ -2274,6 +2277,7 @@ static struct phy_driver realtek_drvs[]
}, {
.match_phy_device = rtl8221b_vb_cg_c22_match_phy_device,
- .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
-+ .soft_reset = genphy_soft_reset,
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
++ .soft_reset = genphy_soft_reset,
.probe = rtl822x_probe,
- .get_features = rtl822x_get_features,
- .config_aneg = rtl822x_config_aneg,
-@@ -2232,6 +2236,7 @@ static struct phy_driver realtek_drvs[]
- .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+@@ -2293,6 +2297,7 @@ static struct phy_driver realtek_drvs[]
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
.config_intr = rtl8221b_config_intr,
.handle_interrupt = rtl8221b_handle_interrupt,
-+ .soft_reset = rtl822x_c45_soft_reset,
++ .soft_reset = rtl822x_c45_soft_reset,
.probe = rtl822x_probe,
- .config_init = rtl822xb_config_init,
- .get_rate_matching = rtl822xb_get_rate_matching,
-@@ -2243,6 +2248,7 @@ static struct phy_driver realtek_drvs[]
+ .config_init = rtl822xb_config_init,
+ .inband_caps = rtl822x_inband_caps,
+@@ -2306,6 +2311,7 @@ static struct phy_driver realtek_drvs[]
}, {
.match_phy_device = rtl8221b_vm_cg_c22_match_phy_device,
- .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
-+ .soft_reset = genphy_soft_reset,
+ .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
++ .soft_reset = genphy_soft_reset,
.probe = rtl822x_probe,
- .get_features = rtl822x_get_features,
- .config_aneg = rtl822x_config_aneg,
-@@ -2260,6 +2266,7 @@ static struct phy_driver realtek_drvs[]
- .name = "RTL8221B-VM-CG 2.5Gbps PHY (C45)",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+@@ -2325,6 +2331,7 @@ static struct phy_driver realtek_drvs[]
+ .name = "RTL8221B-VM-CG 2.5Gbps PHY (C45)",
.config_intr = rtl8221b_config_intr,
.handle_interrupt = rtl8221b_handle_interrupt,
-+ .soft_reset = rtl822x_c45_soft_reset,
++ .soft_reset = rtl822x_c45_soft_reset,
.probe = rtl822x_probe,
- .config_init = rtl822xb_config_init,
- .get_rate_matching = rtl822xb_get_rate_matching,
+ .config_init = rtl822xb_config_init,
+ .inband_caps = rtl822x_inband_caps,
diff --git a/target/linux/generic/pending-6.12/720-04-net-phy-realtek-setup-aldps.patch b/target/linux/generic/pending-6.12/720-04-net-phy-realtek-setup-aldps.patch
index 3e6b23f58a..4734c1d30b 100644
--- a/target/linux/generic/pending-6.12/720-04-net-phy-realtek-setup-aldps.patch
+++ b/target/linux/generic/pending-6.12/720-04-net-phy-realtek-setup-aldps.patch
@@ -35,7 +35,7 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
static int rtl821x_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, RTL821x_PAGE_SELECT);
-@@ -1239,6 +1247,18 @@ static int rtl822x_write_mmd(struct phy_
+@@ -1240,6 +1248,18 @@ static int rtl822x_write_mmd(struct phy_
static int rtl822x_probe(struct phy_device *phydev)
{
@@ -55,9 +55,9 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
phydev->phy_id != RTL_GENERIC_PHYID)
return rtl822x_hwmon_init(phydev);
@@ -1320,6 +1340,19 @@ static int rtl822xb_write_mmd(struct phy
+ return write_ret;
}
-
+static int rtl822x_init_phycr1(struct phy_device *phydev, bool no_aldps)
+{
+ struct rtl822x_priv *priv = phydev->priv;
diff --git a/target/linux/generic/pending-6.12/720-09-net-phy-realtek-support-interrupt-also-for-C22-varia.patch b/target/linux/generic/pending-6.12/720-09-net-phy-realtek-support-interrupt-also-for-C22-varia.patch
index af1ecbfb8e..4ec8593a72 100644
--- a/target/linux/generic/pending-6.12/720-09-net-phy-realtek-support-interrupt-also-for-C22-varia.patch
+++ b/target/linux/generic/pending-6.12/720-09-net-phy-realtek-support-interrupt-also-for-C22-varia.patch
@@ -1,11 +1,13 @@
-From 98a5d7606b7bc9136205969418385e4c9bf8ce56 Mon Sep 17 00:00:00 2001
+From 97f093d9c491f066e5c6bb5bd2e3758f61a9fb30 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel at makrotopia.org>
Date: Mon, 5 Jan 2026 16:59:06 +0000
-Subject: [PATCH] net: phy: realtek: support interrupt also for C22 variants
+Subject: [PATCH 1/3] net: phy: realtek: support interrupt also for C22
+ variants
Now that access to MDIO_MMD_VEND2 works transparently also in Clause-22
mode, add interrupt support also for the C22 variants of the
-RTL8221B-VB-CG and RTL8221B-VM-CG.
+RTL8221B-VB-CG and RTL8221B-VM-CG. This results in the C22 and C45
+driver instances now having all the same features implemented.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
@@ -17,18 +19,18 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
@@ -2347,6 +2347,8 @@ static struct phy_driver realtek_drvs[]
}, {
.match_phy_device = rtl8221b_vb_cg_c22_match_phy_device,
- .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
+ .config_intr = rtl8221b_config_intr,
+ .handle_interrupt = rtl8221b_handle_interrupt,
- .soft_reset = genphy_soft_reset,
+ .soft_reset = genphy_soft_reset,
.probe = rtl822x_probe,
- .get_features = rtl822x_get_features,
+ .get_features = rtl822x_get_features,
@@ -2381,6 +2383,8 @@ static struct phy_driver realtek_drvs[]
}, {
.match_phy_device = rtl8221b_vm_cg_c22_match_phy_device,
- .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
+ .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
+ .config_intr = rtl8221b_config_intr,
+ .handle_interrupt = rtl8221b_handle_interrupt,
- .soft_reset = genphy_soft_reset,
+ .soft_reset = genphy_soft_reset,
.probe = rtl822x_probe,
- .get_features = rtl822x_get_features,
+ .get_features = rtl822x_get_features,
More information about the lede-commits
mailing list