[openwrt/openwrt] realtek: rtl838x: fix lan9 and lan10 on Netgear GS110TUP

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/b2c0182f26da795d70381ab0ebf6bdbc76cc8908

commit b2c0182f26da795d70381ab0ebf6bdbc76cc8908
Author: Jacob Potter <jacob at j4cbo.com>
AuthorDate: Wed Dec 31 14:45:31 2025 -0500

    realtek: rtl838x: fix lan9 and lan10 on Netgear GS110TUP
    
    The GS110TUP's lan9 port is connected via a QSGMII PHY to SERDES 2, and
    therefore should use the SWITCH_PORT_SDS macro instead of SWITCH_PORT. This
    was missed in e956adfe because the GS110TUP is not particularly well
    documented and the old code was confusing.
    
    lan10 is an SFP and doesn't have an onboard PHY, so also remove its
    associated PHY references and update it to match other devices' SFP ports.
    
    Fixes: https://github.com/openwrt/openwrt/issues/21324
    Signed-off-by: Jacob Potter <jacob at j4cbo.com>
    Link: https://github.com/openwrt/openwrt/pull/21346
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 target/linux/realtek/dts/rtl8380_netgear_gs110tup-v1.dts | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs110tup-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs110tup-v1.dts
index b46aa57226..f2f7afabbd 100644
--- a/target/linux/realtek/dts/rtl8380_netgear_gs110tup-v1.dts
+++ b/target/linux/realtek/dts/rtl8380_netgear_gs110tup-v1.dts
@@ -47,24 +47,19 @@
 
 &mdio_bus0 {
 	EXTERNAL_PHY(16)
-	EXTERNAL_PHY(24)
 };
 
 &switch0 {
 	ports {
-		SWITCH_PORT(16, 9, qsgmii)
+		SWITCH_PORT_SDS(16, 9, 2, qsgmii)
 
-		/* TODO: fixed link SFP is not right */
-		port24: port at 24 {
+		port at 24 {
 			reg = <24>;
-			label = SWITCH_PORT_LABEL(10);
+			label = "lan10";
 			pcs-handle = <&serdes4>;
-			phy-handle = <&phy24>;
 			phy-mode = "1000base-x";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
+			managed = "in-band-status";
+			/* i2c and gpios not yet identified */
 		};
 	};
 };