[openwrt/openwrt] ramips: add support for D-Link DIR-1360 A1
LEDE Commits
lede-commits at lists.infradead.org
Sun Feb 1 10:11:51 PST 2026
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/7a8e2efed587104328fad4fc9a03e8af9c02f65f
commit 7a8e2efed587104328fad4fc9a03e8af9c02f65f
Author: Aryaman Srivastava <aryamansrivastava895 at gmail.com>
AuthorDate: Thu Jan 15 23:13:47 2026 +0530
ramips: add support for D-Link DIR-1360 A1
The D-Link DIR-1360 A1 is an AC1300 router based on the MT7621AT SoC.
Specifications :-
* SoC: MediaTek MT7621AT
* RAM: 256 MB DDR3
* Flash: 128 MB SPI NAND (Winbond W29N01HV)
* WiFi: MT7615D (2.4 GHz + 5 GHz DBDC)
* Ethernet: 5x 10/100/1000 Mbps (1x WAN, 4x LAN)
* USB: 1x USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (White/Orange), Internet (White/Orange), USB, 2.4G/5G WLAN
MAC addresses are retrieved from the 'factory' partition via NVMEM.
LAN: 0xe000 (gmac0)
WAN: 0xe006 (gmac1)
WLAN: 0xe00c (pcie0)
Flash Instruction :-
1-Set a static IP on your PC (e.g., 192.168.0.10, Gateway 192.168.0.1).
2- Power off the router and connect your PC to a LAN port.
3- Hold the Reset button and power on the router; continue holding for 5 seconds.
4- Access the Recovery UI at http://192.168.0.1 in your browser.
5- Upload the OpenWrt factory.bin image and wait for the reboot.
With these definitions in place, the DIR-1360 A1 boots reliably, exposes all hardware features correctly, and can be flashed via both the OEM recovery interface and standard OpenWrt upgrade paths.
Signed-off-by: Aryaman Srivastava <aryamansrivastava895 at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21616
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../linux/ramips/dts/mt7621_dlink_dir-1360-a1.dts | 249 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 13 ++
.../ramips/mt7621/base-files/etc/board.d/01_leds | 4 +
.../mt7621/base-files/etc/board.d/02_network | 3 +
.../mt7621/base-files/lib/upgrade/platform.sh | 1 +
5 files changed, 270 insertions(+)
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-1360-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-1360-a1.dts
new file mode 100644
index 0000000000..e6011c5b5f
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-1360-a1.dts
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "dlink,dir-1360-a1", "mediatek,mt7621-soc";
+ model = "D-Link DIR-1360 A1";
+
+ aliases {
+ label-mac-device = &gmac0;
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_white;
+ led-running = &led_power_white;
+ led-upgrade = &led_power_orange;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_orange: power_orange {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_ORANGE>;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_white: power_white {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_internet_orange: internet_orange {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_internet_white: internet_white {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "netdev";
+ device-name = "wan";
+ modes = "link tx rx";
+ };
+
+ usb_white {
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2g {
+ function = LED_FUNCTION_WLAN_2GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0radio";
+ };
+
+ wlan5g {
+ function = LED_FUNCTION_WLAN_5GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1radio";
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition at 80000 {
+ label = "config";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ factory: partition at 100000 {
+ label = "factory";
+ reg = <0x100000 0x40000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom at 0 {
+ reg = <0x0 0x4da8>;
+ };
+
+ macaddr_factory_e000: macaddr at e000 {
+ compatible = "mac-base";
+ reg = <0xe000 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_factory_e006: macaddr at e006 {
+ reg = <0xe006 0x6>;
+ };
+ };
+ };
+
+ partition at 140000 {
+ label = "config2";
+ reg = <0x140000 0x40000>;
+ read-only;
+ };
+
+ partition at 180000 {
+ label = "firmware";
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,padding = <96>;
+ reg = <0x180000 0x2800000>;
+ };
+
+ partition at 2980000 {
+ label = "private";
+ reg = <0x2980000 0x2000000>;
+ read-only;
+ };
+
+ partition at 4980000 {
+ label = "firmware2";
+ reg = <0x4980000 0x2800000>;
+ };
+
+ partition at 7180000 {
+ label = "mydlink";
+ reg = <0x7180000 0x600000>;
+ read-only;
+ };
+
+ partition at 7780000 {
+ label = "reserved";
+ reg = <0x7780000 0x880000>;
+ read-only;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+
+ band at 0 {
+ reg = <0>;
+ nvmem-cells = <&macaddr_factory_e000 2>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ band at 1 {
+ reg = <1>;
+ nvmem-cells = <&macaddr_factory_e000 1>;
+ nvmem-cell-names = "mac-address";
+ };
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ nvmem-cells = <&macaddr_factory_e000 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy4>;
+
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+ðphy4 {
+ /delete-property/ interrupts;
+};
+
+&switch0 {
+ ports {
+ port at 0 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port at 1 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port at 2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port at 3 {
+ status = "okay";
+ label = "lan1";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "uart2", "uart3", "jtag", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 24a4b87f0a..adf131f55e 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -948,6 +948,19 @@ define Device/dlink_dir_nand_128m
check-size
endef
+define Device/dlink_dir-1360-a1
+ $(Device/dlink_dir_nand_128m)
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DIR-1360
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport
+ IMAGE_SIZE := 40960k
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := $$(IMAGE/recovery.bin)
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += dlink_dir-1360-a1
+
define Device/dlink_dir-1935-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-1935
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 989fe17af8..dbefbccc17 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -99,6 +99,10 @@ dlink,dap-x1860-a1)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimedium" "wlan1" "51" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "76" "100"
;;
+dlink,dir-1360-a1)
+ ucidef_set_led_default "power" "Power" "white:power" "1"
+ ucidef_set_led_netdev "internet" "Internet" "white:wan" "wan"
+ ;;
dlink,dir-1960-a1|\
dlink,dir-2055-a1|\
dlink,dir-2150-a1|\
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 2c66ffb652..091c8d2813 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -46,6 +46,9 @@ ramips_setup_interfaces()
cudy,ap1300-outdoor-v1|\
dlink,dap-1620-b1|\
dlink,dap-x1860-a1|\
+ dlink,dir-1360-a1)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+ ;;
dlink,dra-1360-a1|\
edimax,re23s|\
linksys,re7000|\
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 360dc261a4..a737d2f08b 100644
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -84,6 +84,7 @@ platform_do_upgrade() {
belkin,rt1800|\
dlink,covr-x1860-a1|\
dlink,dap-x1860-a1|\
+ dlink,dir-1360-a1|\
dlink,dir-1960-a1|\
dlink,dir-2055-a1|\
dlink,dir-2150-a1|\
More information about the lede-commits
mailing list