[openwrt/openwrt] econet: Add basic USB support with Mass Storage

Thu Sep 18 13:38:13 PDT 2025

hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/c43925313e7179aec7a93aa24a03532f0c1fbaea

commit c43925313e7179aec7a93aa24a03532f0c1fbaea
Author: Caleb James DeLisle <cjd at cjdns.fr>
AuthorDate: Sun Sep 14 17:23:47 2025 +0000

    econet: Add basic USB support with Mass Storage
    
    The EN751221 has an XHCI that is compatible with MT7621.
    While there is setup logic in the vendor code for both
    EN751221 and MT7621, but MT7621 does not use it in mainline
    or OpenWRT, and it appears to work correctly with EN751221.
    
    Include SCSI / Mass Storage because many EcoNet devices
    contain a builtin USB SD-Card reader.
    
    Signed-off-by: Caleb James DeLisle <cjd at cjdns.fr>
    Link: https://github.com/openwrt/openwrt/pull/20050
    [Remove usb storage kmod from smartfiber_xp8421-b]
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 package/kernel/linux/modules/usb.mk                 |  1 +
 target/linux/econet/Makefile                        |  5 ++++-
 target/linux/econet/dts/en751221.dtsi               | 14 ++++++++++++++
 target/linux/econet/en751221/config-6.12            |  4 ++++
 target/linux/econet/image/en751221.mk               |  1 +
 .../patches-6.12/310-usb-enable-econet-usb.patch    | 21 +++++++++++++++++++++
 6 files changed, 45 insertions(+), 1 deletion(-)

diff --git a/package/kernel/linux/modules/usb.mk b/package/kernel/linux/modules/usb.mk
index 8bf070a047..121e3aed51 100644
--- a/package/kernel/linux/modules/usb.mk
+++ b/package/kernel/linux/modules/usb.mk
@@ -1845,6 +1845,7 @@ define KernelPackage/usb3
 	+TARGET_bcm53xx:kmod-usb-bcma \
 	+TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
 	+TARGET_ramips_mt7621:kmod-usb-xhci-mtk \
+	+TARGET_econet_en751221:kmod-usb-xhci-mtk \
 	+TARGET_mediatek:kmod-usb-xhci-mtk
   KCONFIG:= \
 	CONFIG_USB_PCI=y \
diff --git a/target/linux/econet/Makefile b/target/linux/econet/Makefile
index e2c15f0a85..28b8ab33ad 100644
--- a/target/linux/econet/Makefile
+++ b/target/linux/econet/Makefile
@@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk
 ARCH:=mips
 BOARD:=econet
 BOARDNAME:=EcoNet EN75xx MIPS
-FEATURES:=dt source-only squashfs nand
+FEATURES:=dt source-only squashfs nand usb
 SUBTARGETS:=en751221
 
 KERNEL_PATCHVER:=6.12
@@ -19,4 +19,7 @@ endef
 # include the profiles
 include $(INCLUDE_DIR)/target.mk
 
+# nand-utils is used by base-files/sbin/en75_chboot
+DEFAULT_PACKAGES += nand-utils
+
 $(eval $(call BuildTarget))
diff --git a/target/linux/econet/dts/en751221.dtsi b/target/linux/econet/dts/en751221.dtsi
index 4ef907c57a..d512d0425a 100644
--- a/target/linux/econet/dts/en751221.dtsi
+++ b/target/linux/econet/dts/en751221.dtsi
@@ -56,6 +56,20 @@
 		econet,shadow-interrupts = <7 2>, <8 3>, <13 12>, <30 29>;
 	};
 
+    usb: usb at 1fb90000 {
+            compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
+            reg = <0x1fb90000 0x4000>,
+                  <0x1fa80700 0x100>;
+            reg-names = "mac", "ippc";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            interrupt-parent = <&intc>;
+            interrupts = <17>;
+            usb3-lpm-capable;
+    };
+
 	uart: serial at 1fbf0000 {
 		compatible = "ns16550";
 		reg = <0x1fbf0000 0x30>;
diff --git a/target/linux/econet/en751221/config-6.12 b/target/linux/econet/en751221/config-6.12
index 80bb91957d..653019f9c5 100644
--- a/target/linux/econet/en751221/config-6.12
+++ b/target/linux/econet/en751221/config-6.12
@@ -39,6 +39,8 @@ CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_ZSTD=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_ZBOOT=y
+CONFIG_DMA_NEED_SYNC=y
+CONFIG_DMA_NONCOHERENT=y
 CONFIG_DTB_ECONET_NONE=y
 # CONFIG_DTB_ECONET_SMARTFIBER_XP8421_B is not set
 CONFIG_DTC=y
@@ -110,6 +112,7 @@ CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=13
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_SRCU_NMI_SAFE=y
 CONFIG_NET_EGRESS=y
 CONFIG_NET_FLOW_LIMIT=y
@@ -168,6 +171,7 @@ CONFIG_TIMER_PROBE=y
 CONFIG_TREE_RCU=y
 CONFIG_TREE_SRCU=y
 CONFIG_UBIFS_FS=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
 CONFIG_USE_OF=y
 CONFIG_XPS=y
diff --git a/target/linux/econet/image/en751221.mk b/target/linux/econet/image/en751221.mk
index 801af349e0..69d6cebd6c 100644
--- a/target/linux/econet/image/en751221.mk
+++ b/target/linux/econet/image/en751221.mk
@@ -4,6 +4,7 @@ define Device/smartfiber_xp8421-b
   DEVICE_DTS := en751221_smartfiber_xp8421-b
   IMAGES := tclinux.trx
   IMAGE/tclinux.trx := append-kernel | lzma | tclinux-trx
+  DEVICE_PACKAGES := kmod-usb3
 endef
 TARGET_DEVICES += smartfiber_xp8421-b
 
diff --git a/target/linux/econet/patches-6.12/310-usb-enable-econet-usb.patch b/target/linux/econet/patches-6.12/310-usb-enable-econet-usb.patch
new file mode 100644
index 0000000000..15deffaa0c
--- /dev/null
+++ b/target/linux/econet/patches-6.12/310-usb-enable-econet-usb.patch
@@ -0,0 +1,21 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -392,6 +392,7 @@ config ECONET
+ 	bool "EcoNet MIPS family"
+ 	select BOOT_RAW
+ 	select CPU_BIG_ENDIAN
++	select DMA_NONCOHERENT
+ 	select DEBUG_ZBOOT if DEBUG_KERNEL
+ 	select EARLY_PRINTK_8250
+ 	select ECONET_EN751221_TIMER
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -71,7 +71,7 @@ config USB_XHCI_HISTB
+ config USB_XHCI_MTK
+ 	tristate "xHCI support for MediaTek SoCs"
+ 	select MFD_SYSCON
+-	depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
++	depends on (MIPS && SOC_MT7621) || ECONET || ARCH_MEDIATEK || COMPILE_TEST
+ 	help
+ 	  Say 'Y' to enable the support for the xHCI host controller
+ 	  found in MediaTek SoCs.


