[openwrt/openwrt] rockchip: backport dts changes for Rockchip RK358x
LEDE Commits
lede-commits at lists.infradead.org
Sun Sep 7 05:41:31 PDT 2025
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/3adb68ef756f56c99f0305a807a6a365b028549b
commit 3adb68ef756f56c99f0305a807a6a365b028549b
Author: FUKAUMI Naoki <naoki at radxa.com>
AuthorDate: Tue Sep 2 02:42:38 2025 +0000
rockchip: backport dts changes for Rockchip RK358x
Backport dts changes up to Linux v6.17 for Rockchip RK358x.
Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
Link: https://github.com/openwrt/openwrt/pull/19867
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
...-rockchip-Split-up-RK3588-s-PCIe-pinctrls.patch | 444 +++++++++++++++++++++
...m64-dts-rockchip-Add-HDMI0-node-to-rk3588.patch | 61 +++
...ockchip-Use-dma-noncoherent-in-base-RK358.patch | 51 +++
...ockchip-Enable-HDMI0-PHY-clk-provider-on-.patch | 28 ++
...ockchip-Add-HDMI0-PHY-PLL-clock-source-to.patch | 38 ++
...ockchip-Fix-label-name-of-hdptxphy-for-RK.patch | 44 ++
...ockchip-Add-PHY-node-for-HDMI1-TX-port-on.patch | 52 +++
...m64-dts-rockchip-Add-HDMI1-node-on-RK3588.patch | 63 +++
...ockchip-Enable-HDMI1-PHY-clk-provider-on-.patch | 27 ++
...ockchip-Add-HDMI1-PHY-PLL-clock-source-to.patch | 48 +++
...ockchip-Add-HDMI-audio-outputs-for-rk3588.patch | 91 +++++
...ockchip-Add-GPU-power-domain-regulator-de.patch | 46 +++
...ockchip-Add-device-tree-support-for-HDMI-.patch | 88 ++++
...arm64-dts-rockchip-Add-rng-node-to-RK3588.patch | 2 +-
...ockchip-change-rng-reset-id-back-to-its-c.patch | 2 +-
...ockchip-lower-mmc-speed-for-Radxa-Rock-5A.patch | 2 +-
16 files changed, 1084 insertions(+), 3 deletions(-)
diff --git a/target/linux/rockchip/patches-6.12/000-01-v6.13-arm64-dts-rockchip-Split-up-RK3588-s-PCIe-pinctrls.patch b/target/linux/rockchip/patches-6.12/000-01-v6.13-arm64-dts-rockchip-Split-up-RK3588-s-PCIe-pinctrls.patch
new file mode 100644
index 0000000000..9a58adf4cd
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-01-v6.13-arm64-dts-rockchip-Split-up-RK3588-s-PCIe-pinctrls.patch
@@ -0,0 +1,444 @@
+From 4294e32111781b3de4d73b944cbd1bc1662a9a7a Mon Sep 17 00:00:00 2001
+From: Sam Edwards <cfsworks at gmail.com>
+Date: Wed, 11 Sep 2024 19:50:30 -0700
+Subject: arm64: dts: rockchip: Split up RK3588's PCIe pinctrls
+
+These pinctrls manage the low-speed PCIe signals:
+- CLKREQ#: An output on the RK3588 (both RC or EP modes), used to
+ request that external clock-generation circuitry provide a clock.
+- PERST#: An input on the RK3588 in EP mode, used to detect a reset
+ signal from the RC. In RC mode, the hardware does not use this signal:
+ Linux itself generates it by putting the pin in GPIO mode.
+- WAKE#: In EP mode, this is an output; in RC mode, this is an input.
+
+Each of these signals serves a distinct purpose, and more importantly,
+PERST# should not be muxed when the RK3588 is in the RC role. Bundling
+them together in pinctrl groups prevents proper use: indeed, almost none
+of the current board-specific .dts files make any use of them.
+(Exception: Rock 5A recently had a patch land that misuses _pins; this
+ patch corrects that.)
+
+However, on some RK3588 boards, the PCIe 3 controller will indefinitely
+stall the boot if CLKREQ# is not muxed (details in the next patch).
+This patch unbundles the signals to allow them to be used.
+
+Signed-off-by: Sam Edwards <CFSworks at gmail.com>
+Link: https://lore.kernel.org/r/20240912025034.180233-2-CFSworks@gmail.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
+@@ -1612,23 +1612,43 @@
+
+ pcie20x1 {
+ /omit-if-no-ref/
+- pcie20x1m0_pins: pcie20x1m0-pins {
++ pcie20x1m0_clkreqn: pcie20x1m0-clkreqn {
+ rockchip,pins =
+ /* pcie20x1_2_clkreqn_m0 */
+- <3 RK_PC7 4 &pcfg_pull_none>,
++ <3 RK_PC7 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie20x1m0_perstn: pcie20x1m0-perstn {
++ rockchip,pins =
+ /* pcie20x1_2_perstn_m0 */
+- <3 RK_PD1 4 &pcfg_pull_none>,
++ <3 RK_PD1 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie20x1m0_waken: pcie20x1m0-waken {
++ rockchip,pins =
+ /* pcie20x1_2_waken_m0 */
+ <3 RK_PD0 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie20x1m1_pins: pcie20x1m1-pins {
++ pcie20x1m1_clkreqn: pcie20x1m1-clkreqn {
+ rockchip,pins =
+ /* pcie20x1_2_clkreqn_m1 */
+- <4 RK_PB7 4 &pcfg_pull_none>,
++ <4 RK_PB7 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie20x1m1_perstn: pcie20x1m1-perstn {
++ rockchip,pins =
+ /* pcie20x1_2_perstn_m1 */
+- <4 RK_PC1 4 &pcfg_pull_none>,
++ <4 RK_PC1 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie20x1m1_waken: pcie20x1m1-waken {
++ rockchip,pins =
+ /* pcie20x1_2_waken_m1 */
+ <4 RK_PC0 4 &pcfg_pull_none>;
+ };
+@@ -1654,52 +1674,127 @@
+
+ pcie30x1 {
+ /omit-if-no-ref/
+- pcie30x1m0_pins: pcie30x1m0-pins {
++ pcie30x1m0_0_clkreqn: pcie30x1m0-0-clkreqn {
+ rockchip,pins =
+ /* pcie30x1_0_clkreqn_m0 */
+- <0 RK_PC0 12 &pcfg_pull_none>,
++ <0 RK_PC0 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m0_0_perstn: pcie30x1m0-0-perstn {
++ rockchip,pins =
+ /* pcie30x1_0_perstn_m0 */
+- <0 RK_PC5 12 &pcfg_pull_none>,
++ <0 RK_PC5 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m0_0_waken: pcie30x1m0-0-waken {
++ rockchip,pins =
+ /* pcie30x1_0_waken_m0 */
+- <0 RK_PC4 12 &pcfg_pull_none>,
++ <0 RK_PC4 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m0_1_clkreqn: pcie30x1m0-1-clkreqn {
++ rockchip,pins =
+ /* pcie30x1_1_clkreqn_m0 */
+- <0 RK_PB5 12 &pcfg_pull_none>,
++ <0 RK_PB5 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m0_1_perstn: pcie30x1m0-1-perstn {
++ rockchip,pins =
+ /* pcie30x1_1_perstn_m0 */
+- <0 RK_PB7 12 &pcfg_pull_none>,
++ <0 RK_PB7 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m0_1_waken: pcie30x1m0-1-waken {
++ rockchip,pins =
+ /* pcie30x1_1_waken_m0 */
+ <0 RK_PB6 12 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie30x1m1_pins: pcie30x1m1-pins {
++ pcie30x1m1_0_clkreqn: pcie30x1m1-0-clkreqn {
+ rockchip,pins =
+ /* pcie30x1_0_clkreqn_m1 */
+- <4 RK_PA3 4 &pcfg_pull_none>,
++ <4 RK_PA3 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m1_0_perstn: pcie30x1m1-0-perstn {
++ rockchip,pins =
+ /* pcie30x1_0_perstn_m1 */
+- <4 RK_PA5 4 &pcfg_pull_none>,
++ <4 RK_PA5 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m1_0_waken: pcie30x1m1-0-waken {
++ rockchip,pins =
+ /* pcie30x1_0_waken_m1 */
+- <4 RK_PA4 4 &pcfg_pull_none>,
++ <4 RK_PA4 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m1_1_clkreqn: pcie30x1m1-1-clkreqn {
++ rockchip,pins =
+ /* pcie30x1_1_clkreqn_m1 */
+- <4 RK_PA0 4 &pcfg_pull_none>,
++ <4 RK_PA0 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m1_1_perstn: pcie30x1m1-1-perstn {
++ rockchip,pins =
+ /* pcie30x1_1_perstn_m1 */
+- <4 RK_PA2 4 &pcfg_pull_none>,
++ <4 RK_PA2 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m1_1_waken: pcie30x1m1-1-waken {
++ rockchip,pins =
+ /* pcie30x1_1_waken_m1 */
+ <4 RK_PA1 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie30x1m2_pins: pcie30x1m2-pins {
++ pcie30x1m2_0_clkreqn: pcie30x1m2-0-clkreqn {
+ rockchip,pins =
+ /* pcie30x1_0_clkreqn_m2 */
+- <1 RK_PB5 4 &pcfg_pull_none>,
++ <1 RK_PB5 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m2_0_perstn: pcie30x1m2-0-perstn {
++ rockchip,pins =
+ /* pcie30x1_0_perstn_m2 */
+- <1 RK_PB4 4 &pcfg_pull_none>,
++ <1 RK_PB4 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m2_0_waken: pcie30x1m2-0-waken {
++ rockchip,pins =
+ /* pcie30x1_0_waken_m2 */
+- <1 RK_PB3 4 &pcfg_pull_none>,
++ <1 RK_PB3 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m2_1_clkreqn: pcie30x1m2-1-clkreqn {
++ rockchip,pins =
+ /* pcie30x1_1_clkreqn_m2 */
+- <1 RK_PA0 4 &pcfg_pull_none>,
++ <1 RK_PA0 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m2_1_perstn: pcie30x1m2-1-perstn {
++ rockchip,pins =
+ /* pcie30x1_1_perstn_m2 */
+- <1 RK_PA7 4 &pcfg_pull_none>,
++ <1 RK_PA7 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x1m2_1_waken: pcie30x1m2-1-waken {
++ rockchip,pins =
+ /* pcie30x1_1_waken_m2 */
+ <1 RK_PA1 4 &pcfg_pull_none>;
+ };
+@@ -1721,45 +1816,85 @@
+
+ pcie30x2 {
+ /omit-if-no-ref/
+- pcie30x2m0_pins: pcie30x2m0-pins {
++ pcie30x2m0_clkreqn: pcie30x2m0-clkreqn {
+ rockchip,pins =
+ /* pcie30x2_clkreqn_m0 */
+- <0 RK_PD1 12 &pcfg_pull_none>,
++ <0 RK_PD1 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x2m0_perstn: pcie30x2m0-perstn {
++ rockchip,pins =
+ /* pcie30x2_perstn_m0 */
+- <0 RK_PD4 12 &pcfg_pull_none>,
++ <0 RK_PD4 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x2m0_waken: pcie30x2m0-waken {
++ rockchip,pins =
+ /* pcie30x2_waken_m0 */
+ <0 RK_PD2 12 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie30x2m1_pins: pcie30x2m1-pins {
++ pcie30x2m1_clkreqn: pcie30x2m1-clkreqn {
+ rockchip,pins =
+ /* pcie30x2_clkreqn_m1 */
+- <4 RK_PA6 4 &pcfg_pull_none>,
++ <4 RK_PA6 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x2m1_perstn: pcie30x2m1-perstn {
++ rockchip,pins =
+ /* pcie30x2_perstn_m1 */
+- <4 RK_PB0 4 &pcfg_pull_none>,
++ <4 RK_PB0 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x2m1_waken: pcie30x2m1-waken {
++ rockchip,pins =
+ /* pcie30x2_waken_m1 */
+ <4 RK_PA7 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie30x2m2_pins: pcie30x2m2-pins {
++ pcie30x2m2_clkreqn: pcie30x2m2-clkreqn {
+ rockchip,pins =
+ /* pcie30x2_clkreqn_m2 */
+- <3 RK_PD2 4 &pcfg_pull_none>,
++ <3 RK_PD2 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x2m2_perstn: pcie30x2m2-perstn {
++ rockchip,pins =
+ /* pcie30x2_perstn_m2 */
+- <3 RK_PD4 4 &pcfg_pull_none>,
++ <3 RK_PD4 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x2m2_waken: pcie30x2m2-waken {
++ rockchip,pins =
+ /* pcie30x2_waken_m2 */
+ <3 RK_PD3 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie30x2m3_pins: pcie30x2m3-pins {
++ pcie30x2m3_clkreqn: pcie30x2m3-clkreqn {
+ rockchip,pins =
+ /* pcie30x2_clkreqn_m3 */
+- <1 RK_PD7 4 &pcfg_pull_none>,
++ <1 RK_PD7 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x2m3_perstn: pcie30x2m3-perstn {
++ rockchip,pins =
+ /* pcie30x2_perstn_m3 */
+- <1 RK_PB7 4 &pcfg_pull_none>,
++ <1 RK_PB7 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x2m3_waken: pcie30x2m3-waken {
++ rockchip,pins =
+ /* pcie30x2_waken_m3 */
+ <1 RK_PB6 4 &pcfg_pull_none>;
+ };
+@@ -1774,45 +1909,85 @@
+
+ pcie30x4 {
+ /omit-if-no-ref/
+- pcie30x4m0_pins: pcie30x4m0-pins {
++ pcie30x4m0_clkreqn: pcie30x4m0-clkreqn {
+ rockchip,pins =
+ /* pcie30x4_clkreqn_m0 */
+- <0 RK_PC6 12 &pcfg_pull_none>,
++ <0 RK_PC6 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x4m0_perstn: pcie30x4m0-perstn {
++ rockchip,pins =
+ /* pcie30x4_perstn_m0 */
+- <0 RK_PD0 12 &pcfg_pull_none>,
++ <0 RK_PD0 12 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x4m0_waken: pcie30x4m0-waken {
++ rockchip,pins =
+ /* pcie30x4_waken_m0 */
+ <0 RK_PC7 12 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie30x4m1_pins: pcie30x4m1-pins {
++ pcie30x4m1_clkreqn: pcie30x4m1-clkreqn {
+ rockchip,pins =
+ /* pcie30x4_clkreqn_m1 */
+- <4 RK_PB4 4 &pcfg_pull_none>,
++ <4 RK_PB4 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x4m1_perstn: pcie30x4m1-perstn {
++ rockchip,pins =
+ /* pcie30x4_perstn_m1 */
+- <4 RK_PB6 4 &pcfg_pull_none>,
++ <4 RK_PB6 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x4m1_waken: pcie30x4m1-waken {
++ rockchip,pins =
+ /* pcie30x4_waken_m1 */
+ <4 RK_PB5 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie30x4m2_pins: pcie30x4m2-pins {
++ pcie30x4m2_clkreqn: pcie30x4m2-clkreqn {
+ rockchip,pins =
+ /* pcie30x4_clkreqn_m2 */
+- <3 RK_PC4 4 &pcfg_pull_none>,
++ <3 RK_PC4 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x4m2_perstn: pcie30x4m2-perstn {
++ rockchip,pins =
+ /* pcie30x4_perstn_m2 */
+- <3 RK_PC6 4 &pcfg_pull_none>,
++ <3 RK_PC6 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x4m2_waken: pcie30x4m2-waken {
++ rockchip,pins =
+ /* pcie30x4_waken_m2 */
+ <3 RK_PC5 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+- pcie30x4m3_pins: pcie30x4m3-pins {
++ pcie30x4m3_clkreqn: pcie30x4m3-clkreqn {
+ rockchip,pins =
+ /* pcie30x4_clkreqn_m3 */
+- <1 RK_PB0 4 &pcfg_pull_none>,
++ <1 RK_PB0 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x4m3_perstn: pcie30x4m3-perstn {
++ rockchip,pins =
+ /* pcie30x4_perstn_m3 */
+- <1 RK_PB2 4 &pcfg_pull_none>,
++ <1 RK_PB2 4 &pcfg_pull_none>;
++ };
++
++ /omit-if-no-ref/
++ pcie30x4m3_waken: pcie30x4m3-waken {
++ rockchip,pins =
+ /* pcie30x4_waken_m3 */
+ <1 RK_PB1 4 &pcfg_pull_none>;
+ };
+--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+@@ -310,7 +310,7 @@
+ };
+
+ &pcie2x1l2 {
+- pinctrl-0 = <&pcie20x1m0_pins>;
++ pinctrl-0 = <&pcie2_reset>, <&pcie20x1m0_clkreqn>, <&pcie20x1m0_waken>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_wf>;
+@@ -328,6 +328,10 @@
+ pow_en: pow-en {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
++
++ pcie2_reset: pcie2-reset {
++ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
+ };
+
+ power {
diff --git a/target/linux/rockchip/patches-6.12/000-02-v6.13-arm64-dts-rockchip-Add-HDMI0-node-to-rk3588.patch b/target/linux/rockchip/patches-6.12/000-02-v6.13-arm64-dts-rockchip-Add-HDMI0-node-to-rk3588.patch
new file mode 100644
index 0000000000..135e79342f
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-02-v6.13-arm64-dts-rockchip-Add-HDMI0-node-to-rk3588.patch
@@ -0,0 +1,61 @@
+From d7bb71e69f58c1b3665a9f926bf8d3855111bf8e Mon Sep 17 00:00:00 2001
+From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Date: Sat, 19 Oct 2024 13:12:10 +0300
+Subject: arm64: dts: rockchip: Add HDMI0 node to rk3588
+
+Add support for the HDMI0 output port found on RK3588 SoC.
+
+Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Link: https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v2-1-466cd80e8ff9@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+@@ -1369,6 +1369,47 @@
+ status = "disabled";
+ };
+
++ hdmi0: hdmi at fde80000 {
++ compatible = "rockchip,rk3588-dw-hdmi-qp";
++ reg = <0x0 0xfde80000 0x0 0x20000>;
++ clocks = <&cru PCLK_HDMITX0>,
++ <&cru CLK_HDMITX0_EARC>,
++ <&cru CLK_HDMITX0_REF>,
++ <&cru MCLK_I2S5_8CH_TX>,
++ <&cru CLK_HDMIHDP0>,
++ <&cru HCLK_VO1>;
++ clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
++ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>;
++ interrupt-names = "avp", "cec", "earc", "main", "hpd";
++ phys = <&hdptxphy_hdmi0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd
++ &hdmim0_tx0_scl &hdmim0_tx0_sda>;
++ power-domains = <&power RK3588_PD_VO1>;
++ resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMIHDP0>;
++ reset-names = "ref", "hdp";
++ rockchip,grf = <&sys_grf>;
++ rockchip,vo-grf = <&vo1_grf>;
++ status = "disabled";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hdmi0_in: port at 0 {
++ reg = <0>;
++ };
++
++ hdmi0_out: port at 1 {
++ reg = <1>;
++ };
++ };
++ };
++
+ qos_gpu_m0: qos at fdf35000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf35000 0x0 0x20>;
diff --git a/target/linux/rockchip/patches-6.12/000-03-v6.15-arm64-dts-rockchip-Use-dma-noncoherent-in-base-RK358.patch b/target/linux/rockchip/patches-6.12/000-03-v6.15-arm64-dts-rockchip-Use-dma-noncoherent-in-base-RK358.patch
new file mode 100644
index 0000000000..0f3a564413
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-03-v6.15-arm64-dts-rockchip-Use-dma-noncoherent-in-base-RK358.patch
@@ -0,0 +1,51 @@
+From 33b561eb66f1e271f2899e103c857d20425076f4 Mon Sep 17 00:00:00 2001
+From: Dragan Simic <dsimic at manjaro.org>
+Date: Wed, 8 Jan 2025 05:26:45 +0100
+Subject: arm64: dts: rockchip: Use "dma-noncoherent" in base RK3588 SoC dtsi
+
+The preferred way to denote hardware with non-coherent DMA is to use the
+"dma-noncoherent" DT property, at both the GIC redistributor and the GIC ITS
+levels, [1] instead of relying on the compatibles to handle hardware errata,
+in this case the Rockchip 3588001 errata. [2]
+
+Let's have the preferred way employed in the base Rockchip RK3588 SoC dtsi,
+which also goes along with adding initial support for the Rockchip RK3582 SoC
+variant, with its separate compatible. [2][3]
+
+[1] Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+[2] https://lore.kernel.org/linux-rockchip/86msgoozqa.wl-maz@kernel.org/
+[3] https://lore.kernel.org/linux-rockchip/20241222030355.2246-4-naoki@radxa.com/
+
+Cc: Marc Zyngier <maz at kernel.org>
+Cc: FUKAUMI Naoki <naoki at radxa.com>
+Acked-by: Marc Zyngier <maz at kernel.org>
+Signed-off-by: Dragan Simic <dsimic at manjaro.org>
+Link: https://lore.kernel.org/r/fa1a672dae3644bb3caa58f03216d0ca349db88b.1736279094.git.dsimic@manjaro.org
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+@@ -2020,6 +2020,7 @@
+ <0x0 0xfe680000 0 0x100000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-controller;
++ dma-noncoherent;
+ mbi-alias = <0x0 0xfe610000>;
+ mbi-ranges = <424 56>;
+ msi-controller;
+@@ -2031,6 +2032,7 @@
+ its0: msi-controller at fe640000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0xfe640000 0x0 0x20000>;
++ dma-noncoherent;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+@@ -2038,6 +2040,7 @@
+ its1: msi-controller at fe660000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0xfe660000 0x0 0x20000>;
++ dma-noncoherent;
+ msi-controller;
+ #msi-cells = <1>;
+ };
diff --git a/target/linux/rockchip/patches-6.12/000-04-v6.15-arm64-dts-rockchip-Enable-HDMI0-PHY-clk-provider-on-.patch b/target/linux/rockchip/patches-6.12/000-04-v6.15-arm64-dts-rockchip-Enable-HDMI0-PHY-clk-provider-on-.patch
new file mode 100644
index 0000000000..4a6c2ab64c
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-04-v6.15-arm64-dts-rockchip-Enable-HDMI0-PHY-clk-provider-on-.patch
@@ -0,0 +1,28 @@
+From d0f17738778c12be629ba77ff00c43c3e9eb8428 Mon Sep 17 00:00:00 2001
+From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Date: Tue, 4 Feb 2025 14:40:07 +0200
+Subject: arm64: dts: rockchip: Enable HDMI0 PHY clk provider on RK3588
+
+Since commit c4b09c562086 ("phy: phy-rockchip-samsung-hdptx: Add clock
+provider support"), the HDMI PHY PLL can be used as an alternative and
+more accurate pixel clock source for VOP2 to improve display modes
+handling on RK3588 SoC.
+
+Add the missing #clock-cells property to allow using the clock provider
+functionality of HDMI0 PHY.
+
+Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Tested-by: FUKAUMI Naoki <naoki at radxa.com>
+Link: https://lore.kernel.org/r/20250204-vop2-hdmi0-disp-modes-v3-4-d71c6a196e58@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+@@ -2813,6 +2813,7 @@
+ reg = <0x0 0xfed60000 0x0 0x2000>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
+ clock-names = "ref", "apb";
++ #clock-cells = <0>;
+ #phy-cells = <0>;
+ resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>,
+ <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>,
diff --git a/target/linux/rockchip/patches-6.12/000-05-v6.15-arm64-dts-rockchip-Add-HDMI0-PHY-PLL-clock-source-to.patch b/target/linux/rockchip/patches-6.12/000-05-v6.15-arm64-dts-rockchip-Add-HDMI0-PHY-PLL-clock-source-to.patch
new file mode 100644
index 0000000000..9fc343efd4
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-05-v6.15-arm64-dts-rockchip-Add-HDMI0-PHY-PLL-clock-source-to.patch
@@ -0,0 +1,38 @@
+From eb4262203d7d85eb7b6f2696816db272e41f5464 Mon Sep 17 00:00:00 2001
+From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Date: Tue, 4 Feb 2025 14:40:08 +0200
+Subject: arm64: dts: rockchip: Add HDMI0 PHY PLL clock source to VOP2 on
+ RK3588
+
+VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and
+more accurate pixel clock source to improve handling of display modes up
+to 4K at 60Hz on video ports 0, 1 and 2.
+
+For now only HDMI0 output is supported, hence add the related PLL clock.
+
+Tested-by: FUKAUMI Naoki <naoki at radxa.com>
+Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Link: https://lore.kernel.org/r/20250204-vop2-hdmi0-disp-modes-v3-5-d71c6a196e58@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+@@ -1261,14 +1261,16 @@
+ <&cru DCLK_VOP1>,
+ <&cru DCLK_VOP2>,
+ <&cru DCLK_VOP3>,
+- <&cru PCLK_VOP_ROOT>;
++ <&cru PCLK_VOP_ROOT>,
++ <&hdptxphy_hdmi0>;
+ clock-names = "aclk",
+ "hclk",
+ "dclk_vp0",
+ "dclk_vp1",
+ "dclk_vp2",
+ "dclk_vp3",
+- "pclk_vop";
++ "pclk_vop",
++ "pll_hdmiphy0";
+ iommus = <&vop_mmu>;
+ power-domains = <&power RK3588_PD_VOP>;
+ rockchip,grf = <&sys_grf>;
diff --git a/target/linux/rockchip/patches-6.12/000-06-v6.15-arm64-dts-rockchip-Fix-label-name-of-hdptxphy-for-RK.patch b/target/linux/rockchip/patches-6.12/000-06-v6.15-arm64-dts-rockchip-Fix-label-name-of-hdptxphy-for-RK.patch
new file mode 100644
index 0000000000..6decd6e33f
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-06-v6.15-arm64-dts-rockchip-Fix-label-name-of-hdptxphy-for-RK.patch
@@ -0,0 +1,44 @@
+From 2efdb041019fd6c58abefba3eb6fdc4d659e576c Mon Sep 17 00:00:00 2001
+From: Damon Ding <damon.ding at rock-chips.com>
+Date: Thu, 6 Feb 2025 11:03:30 +0800
+Subject: arm64: dts: rockchip: Fix label name of hdptxphy for RK3588
+
+The hdptxphy is a combo transmit-PHY for HDMI2.1 TMDS Link, FRL Link, DP
+and eDP Link. Therefore, it is better to name it hdptxphy0 other than
+hdptxphy_hdmi0, which will be referenced by both hdmi0 and edp0 nodes.
+
+Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
+Link: https://lore.kernel.org/r/20250206030330.680424-3-damon.ding@rock-chips.com
+[added armsom-sige7, where hdmi-support was added recently and also
+ the hdptxphy0-as-dclk source I just added]
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+@@ -1262,7 +1262,7 @@
+ <&cru DCLK_VOP2>,
+ <&cru DCLK_VOP3>,
+ <&cru PCLK_VOP_ROOT>,
+- <&hdptxphy_hdmi0>;
++ <&hdptxphy0>;
+ clock-names = "aclk",
+ "hclk",
+ "dclk_vp0",
+@@ -1387,7 +1387,7 @@
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "avp", "cec", "earc", "main", "hpd";
+- phys = <&hdptxphy_hdmi0>;
++ phys = <&hdptxphy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd
+ &hdmim0_tx0_scl &hdmim0_tx0_sda>;
+@@ -2810,7 +2810,7 @@
+ #dma-cells = <1>;
+ };
+
+- hdptxphy_hdmi0: phy at fed60000 {
++ hdptxphy0: phy at fed60000 {
+ compatible = "rockchip,rk3588-hdptx-phy";
+ reg = <0x0 0xfed60000 0x0 0x2000>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
diff --git a/target/linux/rockchip/patches-6.12/000-07-v6.15-arm64-dts-rockchip-Add-PHY-node-for-HDMI1-TX-port-on.patch b/target/linux/rockchip/patches-6.12/000-07-v6.15-arm64-dts-rockchip-Add-PHY-node-for-HDMI1-TX-port-on.patch
new file mode 100644
index 0000000000..62371943f0
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-07-v6.15-arm64-dts-rockchip-Add-PHY-node-for-HDMI1-TX-port-on.patch
@@ -0,0 +1,52 @@
+From ea97212a0f66b7bd71c23c12f781f1770dd6fcff Mon Sep 17 00:00:00 2001
+From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Date: Wed, 11 Dec 2024 01:06:15 +0200
+Subject: arm64: dts: rockchip: Add PHY node for HDMI1 TX port on RK3588
+
+In preparation to enable the second HDMI output port found on RK3588
+SoC, add the related PHY node. This requires a GRF, hence add the
+dependent node as well.
+
+Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Tested-by: Jagan Teki <jagan at edgeble.ai> # edgeble-6tops-modules
+Tested-by: Alexandre ARNOUD <aarnoud at me.com>
+Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-2-02cdca22ff68@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+@@ -67,6 +67,11 @@
+ };
+ };
+
++ hdptxphy1_grf: syscon at fd5e4000 {
++ compatible = "rockchip,rk3588-hdptxphy-grf", "syscon";
++ reg = <0x0 0xfd5e4000 0x0 0x100>;
++ };
++
+ i2s8_8ch: i2s at fddc8000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfddc8000 0x0 0x1000>;
+@@ -395,6 +400,22 @@
+ };
+ };
+
++ hdptxphy1: phy at fed70000 {
++ compatible = "rockchip,rk3588-hdptx-phy";
++ reg = <0x0 0xfed70000 0x0 0x2000>;
++ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX1>;
++ clock-names = "ref", "apb";
++ #phy-cells = <0>;
++ resets = <&cru SRST_HDPTX1>, <&cru SRST_P_HDPTX1>,
++ <&cru SRST_HDPTX1_INIT>, <&cru SRST_HDPTX1_CMN>,
++ <&cru SRST_HDPTX1_LANE>, <&cru SRST_HDPTX1_ROPLL>,
++ <&cru SRST_HDPTX1_LCPLL>;
++ reset-names = "phy", "apb", "init", "cmn", "lane", "ropll",
++ "lcpll";
++ rockchip,grf = <&hdptxphy1_grf>;
++ status = "disabled";
++ };
++
+ usbdp_phy1: phy at fed90000 {
+ compatible = "rockchip,rk3588-usbdp-phy";
+ reg = <0x0 0xfed90000 0x0 0x10000>;
diff --git a/target/linux/rockchip/patches-6.12/000-08-v6.15-arm64-dts-rockchip-Add-HDMI1-node-on-RK3588.patch b/target/linux/rockchip/patches-6.12/000-08-v6.15-arm64-dts-rockchip-Add-HDMI1-node-on-RK3588.patch
new file mode 100644
index 0000000000..26672d90b4
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-08-v6.15-arm64-dts-rockchip-Add-HDMI1-node-on-RK3588.patch
@@ -0,0 +1,63 @@
+From bed6964e779b5853de042da14320edf9f79506fe Mon Sep 17 00:00:00 2001
+From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Date: Wed, 11 Dec 2024 01:06:16 +0200
+Subject: arm64: dts: rockchip: Add HDMI1 node on RK3588
+
+Add support for the second HDMI TX port found on RK3588 SoC.
+
+Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Tested-by: Jagan Teki <jagan at edgeble.ai> # edgeble-6tops-modules
+Tested-by: Alexandre ARNOUD <aarnoud at me.com>
+Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-3-02cdca22ff68@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+@@ -140,6 +140,47 @@
+ status = "disabled";
+ };
+
++ hdmi1: hdmi at fdea0000 {
++ compatible = "rockchip,rk3588-dw-hdmi-qp";
++ reg = <0x0 0xfdea0000 0x0 0x20000>;
++ clocks = <&cru PCLK_HDMITX1>,
++ <&cru CLK_HDMITX1_EARC>,
++ <&cru CLK_HDMITX1_REF>,
++ <&cru MCLK_I2S6_8CH_TX>,
++ <&cru CLK_HDMIHDP1>,
++ <&cru HCLK_VO1>;
++ clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
++ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
++ interrupt-names = "avp", "cec", "earc", "main", "hpd";
++ phys = <&hdptxphy1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd
++ &hdmim1_tx1_scl &hdmim1_tx1_sda>;
++ power-domains = <&power RK3588_PD_VO1>;
++ resets = <&cru SRST_HDMITX1_REF>, <&cru SRST_HDMIHDP1>;
++ reset-names = "ref", "hdp";
++ rockchip,grf = <&sys_grf>;
++ rockchip,vo-grf = <&vo1_grf>;
++ status = "disabled";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hdmi1_in: port at 0 {
++ reg = <0>;
++ };
++
++ hdmi1_out: port at 1 {
++ reg = <1>;
++ };
++ };
++ };
++
+ pcie3x4: pcie at fe150000 {
+ compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+ #address-cells = <3>;
diff --git a/target/linux/rockchip/patches-6.12/000-09-v6.15-arm64-dts-rockchip-Enable-HDMI1-PHY-clk-provider-on-.patch b/target/linux/rockchip/patches-6.12/000-09-v6.15-arm64-dts-rockchip-Enable-HDMI1-PHY-clk-provider-on-.patch
new file mode 100644
index 0000000000..3503f1a6e9
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-09-v6.15-arm64-dts-rockchip-Enable-HDMI1-PHY-clk-provider-on-.patch
@@ -0,0 +1,27 @@
+From aadaa27956e3430217d9e6b8af5880e39b05b961 Mon Sep 17 00:00:00 2001
+From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Date: Sun, 23 Feb 2025 11:31:39 +0200
+Subject: arm64: dts: rockchip: Enable HDMI1 PHY clk provider on RK3588
+
+Since commit c4b09c562086 ("phy: phy-rockchip-samsung-hdptx: Add clock
+provider support"), the HDMI PHY PLL can be used as an alternative and
+more accurate pixel clock source for VOP2 to improve display modes
+handling on RK3588 SoC.
+
+Add the missing #clock-cells property to allow using the clock provider
+functionality of HDMI1 PHY.
+
+Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-3-f4cec5e06fbe@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+@@ -446,6 +446,7 @@
+ reg = <0x0 0xfed70000 0x0 0x2000>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX1>;
+ clock-names = "ref", "apb";
++ #clock-cells = <0>;
+ #phy-cells = <0>;
+ resets = <&cru SRST_HDPTX1>, <&cru SRST_P_HDPTX1>,
+ <&cru SRST_HDPTX1_INIT>, <&cru SRST_HDPTX1_CMN>,
diff --git a/target/linux/rockchip/patches-6.12/000-10-v6.15-arm64-dts-rockchip-Add-HDMI1-PHY-PLL-clock-source-to.patch b/target/linux/rockchip/patches-6.12/000-10-v6.15-arm64-dts-rockchip-Add-HDMI1-PHY-PLL-clock-source-to.patch
new file mode 100644
index 0000000000..eec7d0ad10
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-10-v6.15-arm64-dts-rockchip-Add-HDMI1-PHY-PLL-clock-source-to.patch
@@ -0,0 +1,48 @@
+From b2e668a60ed866ba960acb5310d1fb6bf81d154f Mon Sep 17 00:00:00 2001
+From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Date: Sun, 23 Feb 2025 11:31:40 +0200
+Subject: arm64: dts: rockchip: Add HDMI1 PHY PLL clock source to VOP2 on
+ RK3588
+
+VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and
+more accurate pixel clock source to improve handling of display modes up
+to 4K at 60Hz on video ports 0, 1 and 2.
+
+The HDMI1 PHY PLL clock source cannot be added directly to vop node in
+rk3588-base.dtsi, along with the HDMI0 related one, because HDMI1 is an
+optional feature and its PHY node belongs to a separate (extra) DT file.
+
+Therefore, add the HDMI1 PHY PLL clock source to VOP2 by overwriting its
+clocks & clock-names properties in the extra DT file.
+
+Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
+Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-4-f4cec5e06fbe@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+@@ -509,3 +509,24 @@
+ status = "disabled";
+ };
+ };
++
++&vop {
++ clocks = <&cru ACLK_VOP>,
++ <&cru HCLK_VOP>,
++ <&cru DCLK_VOP0>,
++ <&cru DCLK_VOP1>,
++ <&cru DCLK_VOP2>,
++ <&cru DCLK_VOP3>,
++ <&cru PCLK_VOP_ROOT>,
++ <&hdptxphy0>,
++ <&hdptxphy1>;
++ clock-names = "aclk",
++ "hclk",
++ "dclk_vp0",
++ "dclk_vp1",
++ "dclk_vp2",
++ "dclk_vp3",
++ "pclk_vop",
++ "pll_hdmiphy0",
++ "pll_hdmiphy1";
++};
diff --git a/target/linux/rockchip/patches-6.12/000-11-v6.15-arm64-dts-rockchip-Add-HDMI-audio-outputs-for-rk3588.patch b/target/linux/rockchip/patches-6.12/000-11-v6.15-arm64-dts-rockchip-Add-HDMI-audio-outputs-for-rk3588.patch
new file mode 100644
index 0000000000..3e4ba5bf10
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-11-v6.15-arm64-dts-rockchip-Add-HDMI-audio-outputs-for-rk3588.patch
@@ -0,0 +1,91 @@
+From b8c6c136971c0e9750eec89f367529b2854d3a3c Mon Sep 17 00:00:00 2001
+From: Detlev Casanova <detlev.casanova at collabora.com>
+Date: Mon, 17 Feb 2025 16:47:41 -0500
+Subject: arm64: dts: rockchip: Add HDMI audio outputs for rk3588
+
+For hdmi0_sound, use the simple-audio-card driver with the hdmi0 QP node
+as CODEC and the i2s5 device as CPU.
+
+Similarly for hdmi1_sound, the CODEC is the hdmi1 node and the CPU is
+i2s6, but only added in the rk3588-extra.dtsi device tree as the second
+TX HDMI port is not available on base versions of the SoC.
+
+The simple-audio-card,mclk-fs value is set to 128 as it is done in
+the downstream driver.
+
+The #sound-dai-cells value is set to 0 in the hdmi0 and hdmi1 nodes so
+that they can be used as audio codec nodes.
+
+Tested-by: Quentin Schulz <quentin.schulz at cherry.de> # RK3588 Tiger Haikou
+Signed-off-by: Detlev Casanova <detlev.casanova at collabora.com>
+Fixes: 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node")
+Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
+Link: https://lore.kernel.org/r/20250217215641.372723-3-detlev.casanova@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+@@ -382,6 +382,22 @@
+ };
+ };
+
++ hdmi0_sound: hdmi0-sound {
++ compatible = "simple-audio-card";
++ simple-audio-card,format = "i2s";
++ simple-audio-card,mclk-fs = <128>;
++ simple-audio-card,name = "hdmi0";
++ status = "disabled";
++
++ simple-audio-card,codec {
++ sound-dai = <&hdmi0>;
++ };
++
++ simple-audio-card,cpu {
++ sound-dai = <&i2s5_8ch>;
++ };
++ };
++
+ pmu-a55 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>;
+@@ -1396,6 +1412,7 @@
+ reset-names = "ref", "hdp";
+ rockchip,grf = <&sys_grf>;
+ rockchip,vo-grf = <&vo1_grf>;
++ #sound-dai-cells = <0>;
+ status = "disabled";
+
+ ports {
+--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+@@ -7,6 +7,22 @@
+ #include "rk3588-extra-pinctrl.dtsi"
+
+ / {
++ hdmi1_sound: hdmi1-sound {
++ compatible = "simple-audio-card";
++ simple-audio-card,format = "i2s";
++ simple-audio-card,mclk-fs = <128>;
++ simple-audio-card,name = "hdmi1";
++ status = "disabled";
++
++ simple-audio-card,codec {
++ sound-dai = <&hdmi1>;
++ };
++
++ simple-audio-card,cpu {
++ sound-dai = <&i2s6_8ch>;
++ };
++ };
++
+ usb_host1_xhci: usb at fc400000 {
+ compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
+ reg = <0x0 0xfc400000 0x0 0x400000>;
+@@ -165,6 +181,7 @@
+ reset-names = "ref", "hdp";
+ rockchip,grf = <&sys_grf>;
+ rockchip,vo-grf = <&vo1_grf>;
++ #sound-dai-cells = <0>;
+ status = "disabled";
+
+ ports {
diff --git a/target/linux/rockchip/patches-6.12/000-12-v6.15-arm64-dts-rockchip-Add-GPU-power-domain-regulator-de.patch b/target/linux/rockchip/patches-6.12/000-12-v6.15-arm64-dts-rockchip-Add-GPU-power-domain-regulator-de.patch
new file mode 100644
index 0000000000..5ad1c88d6d
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-12-v6.15-arm64-dts-rockchip-Add-GPU-power-domain-regulator-de.patch
@@ -0,0 +1,46 @@
+From f94500eb7328b35f3d0927635b1aba26c85ea4b0 Mon Sep 17 00:00:00 2001
+From: Sebastian Reichel <sebastian.reichel at collabora.com>
+Date: Thu, 20 Feb 2025 19:58:11 +0100
+Subject: arm64: dts: rockchip: Add GPU power domain regulator dependency for
+ RK3588
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Enabling the GPU power domain requires that the GPU regulator is
+enabled. The regulator is enabled at boot time, but gets disabled
+automatically when there are no users.
+
+This means the system might run into a failure state hanging the
+whole system for the following use cases:
+
+ * if the GPU driver is being probed late (e.g. build as a
+ module and firmware is not in initramfs), the regulator
+ might already have been disabled. In that case the power
+ domain is enabled before the regulator.
+ * unbinding the GPU driver will disable the PM domain and
+ the regulator. When the driver is bound again, the PM
+ domain will be enabled before the regulator and error
+ appears.
+
+Avoid this by adding an explicit regulator dependency to the
+power domain.
+
+Tested-by: Heiko Stuebner <heiko at sntech.de>
+Reported-by: Adrián Martínez Larumbe <adrian.larumbe at collabora.com>
+Tested-by: Adrian Larumbe <adrian.larumbe at collabora.com> # On Rock 5B
+Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
+Link: https://lore.kernel.org/r/20250220-rk3588-gpu-pwr-domain-regulator-v6-8-a4f9c24e5b81@kernel.org
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+@@ -880,7 +880,7 @@
+ };
+ };
+ /* These power domains are grouped by VD_GPU */
+- power-domain at RK3588_PD_GPU {
++ pd_gpu: power-domain at RK3588_PD_GPU {
+ reg = <RK3588_PD_GPU>;
+ clocks = <&cru CLK_GPU>,
+ <&cru CLK_GPU_COREGROUP>,
diff --git a/target/linux/rockchip/patches-6.12/000-13-v6.15-arm64-dts-rockchip-Add-device-tree-support-for-HDMI-.patch b/target/linux/rockchip/patches-6.12/000-13-v6.15-arm64-dts-rockchip-Add-device-tree-support-for-HDMI-.patch
new file mode 100644
index 0000000000..f269185be5
--- /dev/null
+++ b/target/linux/rockchip/patches-6.12/000-13-v6.15-arm64-dts-rockchip-Add-device-tree-support-for-HDMI-.patch
@@ -0,0 +1,88 @@
+From 0327238991ba2d1de25e1116b1c064f433e45b8d Mon Sep 17 00:00:00 2001
+From: Shreeya Patel <shreeya.patel at collabora.com>
+Date: Fri, 7 Mar 2025 12:18:56 +0300
+Subject: arm64: dts: rockchip: Add device tree support for HDMI RX Controller
+
+Add device tree support for Synopsys DesignWare HDMI RX
+Controller.
+
+Reviewed-by: Dmitry Osipenko <dmitry.osipenko at collabora.com>
+Tested-by: Dmitry Osipenko <dmitry.osipenko at collabora.com>
+Co-developed-by: Dingxian Wen <shawn.wen at rock-chips.com>
+Signed-off-by: Dingxian Wen <shawn.wen at rock-chips.com>
+Signed-off-by: Shreeya Patel <shreeya.patel at collabora.com>
+Signed-off-by: Dmitry Osipenko <dmitry.osipenko at collabora.com>
+Link: https://lore.kernel.org/r/20250307091857.646581-2-dmitry.osipenko@collabora.com
+Signed-off-by: Heiko Stuebner <heiko at sntech.de>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+@@ -23,6 +23,30 @@
+ };
+ };
+
++ reserved-memory {
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++
++ /*
++ * The 4k HDMI capture controller works only with 32bit
++ * phys addresses and doesn't support IOMMU. HDMI RX CMA
++ * must be reserved below 4GB.
++ * The size of 160MB was determined as follows:
++ * (3840 * 2160 pixels) * (4 bytes/pixel) * (2 frames/buffer) / 10^6 = 66MB
++ * To ensure sufficient support for practical use-cases,
++ * we doubled the 66MB value.
++ */
++ hdmi_receiver_cma: hdmi-receiver-cma {
++ compatible = "shared-dma-pool";
++ alloc-ranges = <0x0 0x0 0x0 0xffffffff>;
++ size = <0x0 (160 * 0x100000)>; /* 160MiB */
++ alignment = <0x0 0x40000>; /* 64K */
++ no-map;
++ status = "disabled";
++ };
++ };
++
+ usb_host1_xhci: usb at fc400000 {
+ compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
+ reg = <0x0 0xfc400000 0x0 0x400000>;
+@@ -198,6 +222,37 @@
+ };
+ };
+
++ hdmi_receiver: hdmi_receiver at fdee0000 {
++ compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx";
++ reg = <0x0 0xfdee0000 0x0 0x6000>;
++ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>,
++ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
++ interrupt-names = "cec", "hdmi", "dma";
++ clocks = <&cru ACLK_HDMIRX>,
++ <&cru CLK_HDMIRX_AUD>,
++ <&cru CLK_CR_PARA>,
++ <&cru PCLK_HDMIRX>,
++ <&cru CLK_HDMIRX_REF>,
++ <&cru PCLK_S_HDMIRX>,
++ <&cru HCLK_VO1>;
++ clock-names = "aclk",
++ "audio",
++ "cr_para",
++ "pclk",
++ "ref",
++ "hclk_s_hdmirx",
++ "hclk_vo1";
++ memory-region = <&hdmi_receiver_cma>;
++ power-domains = <&power RK3588_PD_VO1>;
++ resets = <&cru SRST_A_HDMIRX>, <&cru SRST_P_HDMIRX>,
++ <&cru SRST_HDMIRX_REF>, <&cru SRST_A_HDMIRX_BIU>;
++ reset-names = "axi", "apb", "ref", "biu";
++ rockchip,grf = <&sys_grf>;
++ rockchip,vo1-grf = <&vo1_grf>;
++ status = "disabled";
++ };
++
+ pcie3x4: pcie at fe150000 {
+ compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+ #address-cells = <3>;
diff --git a/target/linux/rockchip/patches-6.12/057-09-v6.15-arm64-dts-rockchip-Add-rng-node-to-RK3588.patch b/target/linux/rockchip/patches-6.12/057-09-v6.15-arm64-dts-rockchip-Add-rng-node-to-RK3588.patch
index db2dcd27b7..880c30d812 100644
--- a/target/linux/rockchip/patches-6.12/057-09-v6.15-arm64-dts-rockchip-Add-rng-node-to-RK3588.patch
+++ b/target/linux/rockchip/patches-6.12/057-09-v6.15-arm64-dts-rockchip-Add-rng-node-to-RK3588.patch
@@ -17,7 +17,7 @@ Signed-off-by: Heiko Stuebner <heiko at sntech.de>
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
-@@ -1878,6 +1878,14 @@
+@@ -1938,6 +1938,14 @@
status = "disabled";
};
diff --git a/target/linux/rockchip/patches-6.12/057-10-v6.15-arm64-dts-rockchip-change-rng-reset-id-back-to-its-c.patch b/target/linux/rockchip/patches-6.12/057-10-v6.15-arm64-dts-rockchip-change-rng-reset-id-back-to-its-c.patch
index bc6865475f..91045bc80e 100644
--- a/target/linux/rockchip/patches-6.12/057-10-v6.15-arm64-dts-rockchip-change-rng-reset-id-back-to-its-c.patch
+++ b/target/linux/rockchip/patches-6.12/057-10-v6.15-arm64-dts-rockchip-change-rng-reset-id-back-to-its-c.patch
@@ -14,7 +14,7 @@ Signed-off-by: Heiko Stuebner <heiko at sntech.de>
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
-@@ -1883,7 +1883,7 @@
+@@ -1943,7 +1943,7 @@
reg = <0x0 0xfe378000 0x0 0x200>;
interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&scmi_clk SCMI_HCLK_SECURE_NS>;
diff --git a/target/linux/rockchip/patches-6.12/117-arm64-dts-rockchip-lower-mmc-speed-for-Radxa-Rock-5A.patch b/target/linux/rockchip/patches-6.12/117-arm64-dts-rockchip-lower-mmc-speed-for-Radxa-Rock-5A.patch
index e69407f6ef..c6fc2b21eb 100644
--- a/target/linux/rockchip/patches-6.12/117-arm64-dts-rockchip-lower-mmc-speed-for-Radxa-Rock-5A.patch
+++ b/target/linux/rockchip/patches-6.12/117-arm64-dts-rockchip-lower-mmc-speed-for-Radxa-Rock-5A.patch
@@ -15,7 +15,7 @@ Signed-off-by: Tianling Shen <cnsztl at gmail.com>
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
-@@ -383,7 +383,7 @@
+@@ -387,7 +387,7 @@
max-frequency = <150000000>;
no-sdio;
no-mmc;
More information about the lede-commits
mailing list