[openwrt/openwrt] ath79: asus: convert to nvmem for calibration

LEDE Commits lede-commits at lists.infradead.org
Sat Oct 4 11:47:01 PDT 2025


hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/5263c4b993e729ea8079906215696d7f49f8d4da

commit 5263c4b993e729ea8079906215696d7f49f8d4da
Author: Rosen Penev <rosenp at gmail.com>
AuthorDate: Wed Oct 1 20:07:37 2025 -0700

    ath79: asus: convert to nvmem for calibration
    
    Userspace handling is deprecated.
    
    Also handle 2.4ghz LED in ath9k instead of generic.
    
    Signed-off-by: Rosen Penev <rosenp at gmail.com>
    Link: https://github.com/openwrt/openwrt/pull/20269
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 target/linux/ath79/dts/qca9531_asus_rp-ac51.dts         | 17 +++++++++++------
 target/linux/ath79/dts/qca9563_asus_pl-ac56.dts         | 17 +++++++++++------
 target/linux/ath79/dts/qca9563_asus_rp-ac66.dts         |  7 ++++++-
 .../linux/ath79/generic/base-files/etc/board.d/01_leds  |  2 --
 .../base-files/etc/hotplug.d/firmware/10-ath9k-eeprom   |  5 -----
 5 files changed, 28 insertions(+), 20 deletions(-)

diff --git a/target/linux/ath79/dts/qca9531_asus_rp-ac51.dts b/target/linux/ath79/dts/qca9531_asus_rp-ac51.dts
index b40b1406a3..a33a476407 100644
--- a/target/linux/ath79/dts/qca9531_asus_rp-ac51.dts
+++ b/target/linux/ath79/dts/qca9531_asus_rp-ac51.dts
@@ -55,11 +55,6 @@
 			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		wlan2g {
-			label = "blue:wlan2g";
-			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-		};
-
 		wlan5g {
 			label = "blue:wlan5g";
 			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
@@ -117,6 +112,10 @@
 						reg = <0x0 0x6>;
 					};
 
+					cal_art_1000: calibration at 1000 {
+						reg = <0x1000 0x440>;
+					};
+
 					macaddr_art_1002: macaddr at 1002 {
 						reg = <0x1002 0x6>;
 					};
@@ -153,5 +152,11 @@
 &wmac {
 	status = "okay";
 
-	qca,no-eeprom;
+	nvmem-cells = <&cal_art_1000>;
+	nvmem-cell-names = "calibration";
+
+	led {
+		led-sources = <16>;
+		led-active-low;
+	};
 };
diff --git a/target/linux/ath79/dts/qca9563_asus_pl-ac56.dts b/target/linux/ath79/dts/qca9563_asus_pl-ac56.dts
index a48d14b1d7..0d61a02ec5 100644
--- a/target/linux/ath79/dts/qca9563_asus_pl-ac56.dts
+++ b/target/linux/ath79/dts/qca9563_asus_pl-ac56.dts
@@ -48,11 +48,6 @@
 			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 		};
 
-		wlan2g {
-			label = "green:wlan2g";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-
 		wlan5g {
 			label = "green:wlan5g";
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
@@ -106,6 +101,10 @@
 					#address-cells = <1>;
 					#size-cells = <1>;
 
+					cal_art_1000: calibration at 1000 {
+						reg = <0x1000 0x440>;
+					};
+
 					macaddr_art_1002: macaddr at 1002 {
 						reg = <0x1002 0x6>;
 					};
@@ -168,5 +167,11 @@
 &wmac {
 	status = "okay";
 
-	qca,no-eeprom;
+	nvmem-cells = <&cal_art_1000>;
+	nvmem-cell-names = "calibration";
+
+	led {
+		led-sources = <19>;
+		led-active-low;
+	};
 };
diff --git a/target/linux/ath79/dts/qca9563_asus_rp-ac66.dts b/target/linux/ath79/dts/qca9563_asus_rp-ac66.dts
index 1b8f5acadf..4f00abf7e7 100644
--- a/target/linux/ath79/dts/qca9563_asus_rp-ac66.dts
+++ b/target/linux/ath79/dts/qca9563_asus_rp-ac66.dts
@@ -127,6 +127,10 @@
 					#address-cells = <1>;
 					#size-cells = <1>;
 
+					cal_art_1000: calibration at 1000 {
+						reg = <0x1000 0x440>;
+					};
+
 					macaddr_art_1002: macaddr at 1002 {
 						reg = <0x1002 0x6>;
 					};
@@ -168,5 +172,6 @@
 &wmac {
 	status = "okay";
 
-	qca,no-eeprom;
+	nvmem-cells = <&cal_art_1000>;
+	nvmem-cell-names = "calibration";
 };
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 502b319bd1..870c2c322d 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -81,12 +81,10 @@ alfa-network,tube-2hq)
 	;;
 asus,pl-ac56)
 	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3e"
-	ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan2g" "wlan1" "link"
 	ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan5g" "wlan0" "link"
 	;;
 asus,rp-ac51)
 	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
-	ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2G" "wlan1" "link"
 	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5G" "wlan0" "link"
 	;;
 asus,rp-ac66)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index b04c9499f3..078fbada57 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -9,11 +9,6 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
 	case $board in
-	asus,pl-ac56|\
-	asus,rp-ac51|\
-	asus,rp-ac66)
-		caldata_extract "art" 0x1000 0x440
-		;;
 	avm,fritz1750e|\
 	avm,fritz4020|\
 	avm,fritz450e|\




More information about the lede-commits mailing list