[openwrt/openwrt] ramips: mt7621: add support for Cudy AP1300 Outdoor v1
LEDE Commits
lede-commits at lists.infradead.org
Fri Nov 28 16:22:06 PST 2025
hauke pushed a commit to openwrt/openwrt.git, branch openwrt-24.10:
https://git.openwrt.org/c6e59d06afca02ccb2541631cacc769ae4d6569f
commit c6e59d06afca02ccb2541631cacc769ae4d6569f
Author: Luis Mita <luis at luismita.com>
AuthorDate: Wed Oct 1 18:42:58 2025 -0400
ramips: mt7621: add support for Cudy AP1300 Outdoor v1
Hardware:
- SoC: MediaTek MT7621DAT
- Flash: 16 MiB XM25QH128C
- RAM: 128 MiB
- WLAN: 2.4 GHz (MT7603E, 11n), 5 GHz (MediaTek MT7613BEN, 11ac)
- Ethernet: 1x10/100/1000 Mbps LAN
- Buttons: 1 Reset button, 1 WPS button
- LEDs: 5x Green
- Serial Console: unpopulated header 115200 8n1 (silkscreen on PCB)
- Power: POE 802.3af (37-57V DC)
MAC addresses:
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| LAN | 80:af:ca:xx:xx:x0 | label |
| WLAN 2g | 80:af:ca:xx:xx:x0 | label |
| WLAN 5g | 82:af:ca:xx:xx:x1 | +1 |
+---------+-------------------+-----------+
Installation:
The factory firmware is locked: you can only work with Cudy signed firmware.
Download a intermediate firmware signed by Cudy here:
https://www.cudy.com/blogs/faq/openwrt-software-download
After that, login to the router (192.168.10.254, password "admin") and install the intermediate firmware.
If you can reach LuCI or SSH now on the intermediate firmware, just use the sysupgrade image with the 'Keep settings' option turned off.
Special thanks to Daniel de Kock for starting the porting work at #16265.
Signed-off-by: Luis Mita <luis at luismita.com>
Co-Authored-By: Daniel de Kock <daniel at riot.network>
Co-Authored-By: Hauke Mehrtens <hauke at hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/20268
(cherry picked from commit 8fb644e9e8416df0d7051d8e35b57b06a030c05e)
Link: https://github.com/openwrt/openwrt/pull/20710
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../ramips/dts/mt7621_cudy_ap1300-outdoor-v1.dts | 213 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 14 ++
.../ramips/mt7621/base-files/etc/board.d/01_leds | 3 +
.../mt7621/base-files/etc/board.d/02_network | 1 +
4 files changed, 231 insertions(+)
diff --git a/target/linux/ramips/dts/mt7621_cudy_ap1300-outdoor-v1.dts b/target/linux/ramips/dts/mt7621_cudy_ap1300-outdoor-v1.dts
new file mode 100644
index 0000000000..f6dbd17a87
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_cudy_ap1300-outdoor-v1.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "cudy,ap1300-outdoor-v1", "mediatek,mt7621-soc";
+ model = "Cudy AP1300 Outdoor v1";
+
+ aliases {
+ led-boot = &led_sys;
+ led-failsafe = &led_sys;
+ led-running = &led_sys;
+ led-upgrade = &led_sys;
+ label-mac-device = &gmac0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led_sys:status {
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ internet {
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN_ONLINE;
+ };
+
+ lan {
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ wifi2g {
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN_2GHZ;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi5g {
+ gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN_5GHZ;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms seems to be around 30s for this device*/
+ hw_margin_ms = <10000>;
+ always-running;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom at 0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_factory_8000: eeprom at 8000 {
+ reg = <0x8000 0x4da8>;
+ };
+ };
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition at fd0000 {
+ label = "debug";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition at fe0000 {
+ label = "backup";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition at ff0000 {
+ label = "bdinfo";
+ reg = <0xff0000 0x10000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_bdinfo_de00: macaddr at de00 {
+ compatible = "mac-base";
+ reg = <0xde00 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00 1>;
+ nvmem-cell-names = "eeprom", "mac-address";
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+};
+
+&pcie1 {
+ wifi at 1,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00 2>;
+ nvmem-cell-names = "eeprom", "mac-address";
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_bdinfo_de00 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ ports {
+ port at 4 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "wdt", "i2c", "jtag";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 03761edc94..fcef42bfb9 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -702,6 +702,20 @@ define Device/confiabits_mt7621-v1
endef
TARGET_DEVICES += confiabits_mt7621-v1
+define Device/cudy_ap1300-outdoor-v1
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := AP1300 Outdoor
+ DEVICE_VARIANT := v1
+ IMAGE_SIZE := 15872k
+ UIMAGE_NAME := R39
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+ -uboot-envtools
+ SUPPORTED_DEVICES += R39
+endef
+TARGET_DEVICES += cudy_ap1300-outdoor-v1
+
define Device/cudy_m1300-v2
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 5d92006d66..94f36c1f6e 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -58,6 +58,9 @@ wifire,s1500-nbn)
belkin,rt1800)
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
;;
+cudy,ap1300-outdoor-v1)
+ ucidef_set_led_netdev "lan" "lan" "green:lan" "lan"
+ ;;
confiabits,mt7621-v1|\
genexis,pulse-ex400|\
netis,n6)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 337d3ad904..9d2f119c7e 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -40,6 +40,7 @@ ramips_setup_interfaces()
arcadyan,we410443|\
asus,rp-ac56|\
asus,rp-ac87|\
+ cudy,ap1300-outdoor-v1|\
dlink,dap-1620-b1|\
dlink,dap-x1860-a1|\
dlink,dra-1360-a1|\
More information about the lede-commits
mailing list