[openwrt/openwrt] kirkwood: add support for D-Link DNS-325 A1
LEDE Commits
lede-commits at lists.infradead.org
Tue Nov 25 06:41:45 PST 2025
ansuel pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/7e829b82090ff102d2ce2435737526b8e9e4a86f
commit 7e829b82090ff102d2ce2435737526b8e9e4a86f
Author: Konstantin Meshkov <skyline at mail.ru>
AuthorDate: Tue Nov 25 16:08:26 2025 +0300
kirkwood: add support for D-Link DNS-325 A1
The D-Link DNS-325 A1 is NAS with 2x HDD (3.5 inch) bays, 1x 10/100/1000Base-T port and 1x USB 2.0 port
Device specification:
SoC: Marvell 88F6281-A1 1.2 GHz
RAM: 256 MB (2xSEC K4T1G084QF-HCF7:128Mx8 @400 CL6)
Flash: 128 MB (SAMSUNG 946 K9F1G08U0B PCB0)
SATA: 2x internal SATA II drives
Ethernet: 1x Gigabit (Marvell 88E1116R-NNC1)
LED: 7x (white: Power, white/red: Right SATA Activity, USB Activity, Left SATA Activity)
Key: 3x (Power, Reset, USB Copy/Unmount)
Serial: 5 pin header (RXD,GAP,3.3V,GND,TXD), (115200,8,N,1), 3.3V TTL
USB ports: 1x USB 2.0
Flash instruction:
NOTE: this process uses a serial connection. It will upgrade the bootloader and reset the bootloader environment variables
USB flash stick setup
Format to FAT32 without mbr
Copy these files to USB flash stick: dlink_dns-325-a1-initramfs-uImage dlink_dns-325-a1-squashfs-factory.bin dlink_dns-325-a1-squashfs-sysupgrade.bin u-boot.kwb (from u-boot-dns325 directory)
NAS setup
Connect LAN cable between router and NAS device
Connetc USB flash stick to NAS device
Connect serial to NAS device
Boot from new u-boot and install it
$ kwboot -p -b u-boot.kwb -B115200 -t /dev/ttyUSB0
Power on NAS
After download copleted and booted NAS device with new u-boot stop in bootloader by pressing any key
=> usb start
=> fatload usb 0 0x1000000 /u-boot.kwb
=> nand erase.part u-boot
=> nand write 0x1000000 u-boot ${filesize}
=> reset
Update MAC address in u-boot env
Stop in bootloader by pressing any key
Get your MAC address from label on chassis
=> setenv ethaddr XX:XX:XX:XX:XX:XX
=> saveenv
Install OpenWrt by flashing factory image from u-boot
=> usb start
=> fatload usb 0 0x1000000 /dlink_dns-325-a1-squashfs-factory.bin
=> nand erase.part ubi
=> nand write 0x1000000 ubi ${filesize}
=> reset
Based-on: #9296
Signed-off-by: Konstantin Meshkov <skyline at mail.ru>
[ refresh uboot patches ]
Link: https://github.com/openwrt/openwrt/pull/17924
Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
package/boot/uboot-kirkwood/Makefile | 6 ++
...25-Correct-CONFIG_NR_DRAM_BANKS-parameter.patch | 27 +++++++++
.../boot/uboot-kirkwood/patches/100-dns325.patch | 65 ++++++++++++++++++++++
.../patches/200-openwrt-config.patch | 20 +++++++
.../boot/uboot-tools/uboot-envtools/files/kirkwood | 1 +
.../kirkwood/base-files/etc/board.d/02_network | 1 +
target/linux/kirkwood/image/Makefile | 12 ++++
7 files changed, 132 insertions(+)
diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile
index afeee805a0..d38c5d327f 100644
--- a/package/boot/uboot-kirkwood/Makefile
+++ b/package/boot/uboot-kirkwood/Makefile
@@ -25,6 +25,11 @@ define U-Boot/dns320l
BUILD_DEVICES:=dlink_dns320l
endef
+define U-Boot/dns325
+ NAME:=D-Link DNS-325 A1
+ BUILD_DEVICES:=dlink_dns-325-a1
+endef
+
define U-Boot/dockstar
NAME:=Seagate DockStar
BUILD_DEVICES:=seagate_dockstar
@@ -112,6 +117,7 @@ endef
UBOOT_TARGETS := \
dns320l \
+ dns325 \
dockstar dockstar_second_stage \
goflexhome \
ib62x0 ib62x0_second_stage \
diff --git a/package/boot/uboot-kirkwood/patches/011-arm-kirkwood-dns325-Correct-CONFIG_NR_DRAM_BANKS-parameter.patch b/package/boot/uboot-kirkwood/patches/011-arm-kirkwood-dns325-Correct-CONFIG_NR_DRAM_BANKS-parameter.patch
new file mode 100644
index 0000000000..1140d17326
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/011-arm-kirkwood-dns325-Correct-CONFIG_NR_DRAM_BANKS-parameter.patch
@@ -0,0 +1,27 @@
+From e7e650e8bdb09ac46da017250394f8c589df10bb Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini at konsulko.com>
+Date: Mon, 14 Sep 2020 15:48:47 -0400
+Subject: [PATCH] arm: kirkwood: dns325: Correct CONFIG_NR_DRAM_BANKS parameter
+
+Testing on a DNS-325 NAS has shown that in order for the device to work
+we need to set CONFIG_NR_DRAM_BANKS to 1 and not 2.
+
+Tested-by: Dmitry N. Kolesnikov <dk.diklab at gmail.com>
+Reported-by: Dmitry N. Kolesnikov <dk.diklab at gmail.com>
+Cc: Stefan Herbrechtsmeier <stefan at herbrechtsmeier.net>
+Signed-off-by: Tom Rini <trini at konsulko.com>
+---
+ configs/dns325_defconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/configs/dns325_defconfig
++++ b/configs/dns325_defconfig
+@@ -6,7 +6,7 @@ CONFIG_SYS_TEXT_BASE=0x600000
+ CONFIG_TARGET_DNS325=y
+ CONFIG_ENV_SIZE=0x20000
+ CONFIG_ENV_OFFSET=0xE0000
+-CONFIG_NR_DRAM_BANKS=2
++CONFIG_NR_DRAM_BANKS=1
+ CONFIG_IDENT_STRING="\nD-Link DNS-325"
+ # CONFIG_SYS_MALLOC_F is not set
+ CONFIG_BOOTDELAY=3
diff --git a/package/boot/uboot-kirkwood/patches/100-dns325.patch b/package/boot/uboot-kirkwood/patches/100-dns325.patch
new file mode 100644
index 0000000000..38178da736
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/100-dns325.patch
@@ -0,0 +1,65 @@
+--- a/configs/dns325_defconfig
++++ b/configs/dns325_defconfig
+@@ -27,7 +27,7 @@ CONFIG_CMD_FAT=y
+ CONFIG_CMD_JFFS2=y
+ CONFIG_CMD_MTDPARTS=y
+ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
+-CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)"
++CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000 at 0x0(u-boot),0x20000 at 0xe0000(u-boot-env),- at 0x100000(ubi)"
+ CONFIG_CMD_UBI=y
+ CONFIG_ISO_PARTITION=y
+ CONFIG_OF_CONTROL=y
+--- a/include/configs/dns325.h
++++ b/include/configs/dns325.h
+@@ -66,46 +66,12 @@
+ */
+
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+- "stdin=serial\0" \
+- "stdout=serial\0" \
+- "stderr=serial\0" \
+- "loadaddr=0x800000\0" \
+- "autoload=no\0" \
+- "console=ttyS0,115200\0" \
+- "mtdparts="CONFIG_MTDPARTS_DEFAULT \
+- "optargs=\0" \
+- "bootenv=uEnv.txt\0" \
+- "importbootenv=echo Importing environment ...; " \
+- "env import -t ${loadaddr} ${filesize}\0" \
+- "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
+- "setbootargs=setenv bootargs console=${console} " \
+- "${optargs} " \
+- "${mtdparts} " \
+- "root=${bootenvroot} " \
+- "rootfstype=${bootenvrootfstype}\0" \
+- "subbootcmd=run setbootargs; " \
+- "if run bootenvloadimage; then " \
+- "bootm ${loadaddr};" \
+- "fi;\0" \
+- "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
+- "nandrootfstype=ubifs\0" \
+- "nandloadimage=nand read ${loadaddr} kernel\0" \
+- "setnandbootenv=echo Booting from nand ...; " \
+- "setenv bootenvroot ${nandroot}; " \
+- "setenv bootenvrootfstype ${nandrootfstype}; " \
+- "setenv bootenvloadimage ${nandloadimage}\0"
++ "mtdids="CONFIG_MTDIDS_DEFAULT "\0" \
++ "mtdparts="CONFIG_MTDPARTS_DEFAULT "\0"
+
+ #define CONFIG_BOOTCOMMAND \
+- "if test -n ${bootenv} && usb start; then " \
+- "if run loadbootenv; then " \
+- "echo Loaded environment ${bootenv} from usb;" \
+- "run importbootenv;" \
+- "fi;" \
+- "if test -n ${bootenvcmd}; then " \
+- "echo Running bootenvcmd ...;" \
+- "run bootenvcmd;" \
+- "fi;" \
+- "fi;" \
+- "run setnandbootenv subbootcmd;"
++ "ubi part ubi; " \
++ "ubi read 0x800000 kernel; " \
++ "bootm 0x800000"
+
+ #endif /* _CONFIG_DNS325_H */
diff --git a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
index 00bc29f13e..d07a35e795 100644
--- a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
+++ b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch
@@ -214,3 +214,23 @@
+CONFIG_FIT_VERBOSE=y
CONFIG_LZMA=y
+CONFIG_LZO=y
+--- a/configs/dns325_defconfig
++++ b/configs/dns325_defconfig
+@@ -48,3 +48,8 @@ CONFIG_USB=y
+ CONFIG_DM_USB=y
+ CONFIG_USB_EHCI_HCD=y
+ CONFIG_USB_STORAGE=y
++CONFIG_CMD_BOOTZ=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_LZMA=y
++CONFIG_LZO=y
+--- a/include/configs/dns325.h
++++ b/include/configs/dns325.h
+@@ -74,4 +74,6 @@
+ "ubi read 0x800000 kernel; " \
+ "bootm 0x800000"
+
++#include "openwrt-kirkwood-common.h"
++
+ #endif /* _CONFIG_DNS325_H */
diff --git a/package/boot/uboot-tools/uboot-envtools/files/kirkwood b/package/boot/uboot-tools/uboot-envtools/files/kirkwood
index b6b483ac4f..77e386fd24 100644
--- a/package/boot/uboot-tools/uboot-envtools/files/kirkwood
+++ b/package/boot/uboot-tools/uboot-envtools/files/kirkwood
@@ -16,6 +16,7 @@ checkpoint,l-50|\
cloudengines,pogoe02|\
cloudengines,pogoplugv4|\
dlink,dns320l|\
+dlink,dns-325-a1\
globalscale,sheevaplug|\
iom,ix2-200|\
iom,ix4-200d|\
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
index ff7897fe13..1b3217718d 100644
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -20,6 +20,7 @@ kirkwood_setup_interfaces()
cloudengines,pogoplugv4|\
ctera,c200-v1|\
dlink,dns320l|\
+ dlink,dns-325-a1|\
globalscale,sheevaplug|\
iom,iconnect-1.1|\
iom,ix2-200|\
diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile
index 53899e92b8..0012281334 100644
--- a/target/linux/kirkwood/image/Makefile
+++ b/target/linux/kirkwood/image/Makefile
@@ -189,6 +189,18 @@ define Device/dlink_dns320l
endef
TARGET_DEVICES += dlink_dns320l
+define Device/dlink_dns-325-a1
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DNS-325
+ DEVICE_VARIANT := A1
+ DEVICE_DTS := kirkwood-dns325
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-hwmon-lm75 kmod-hwmon-gpiofan \
+ kmod-thermal kmod-usb-ledtrig-usbport kmod-gpio-button-hotplug block-mount \
+ mdadm kmod-md-linear kmod-usb-storage kmod-fs-ext4 e2fsprogs partx-utils \
+ fdisk kmod-rtc-mv
+endef
+TARGET_DEVICES += dlink_dns-325-a1
+
define Device/endian_4i-edge-200
DEVICE_VENDOR := Endian
DEVICE_MODEL := 4i Edge 200
More information about the lede-commits
mailing list