[openwrt/openwrt] bcm4908: 6.12: refresh patches

[LEDE Commits]

ansuel pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/aec7153f14b81f84ad9d083ba07fbdaa1356be11

commit aec7153f14b81f84ad9d083ba07fbdaa1356be11
Author: Stefan Kalscheuer <stefan at stklcode.de>
AuthorDate: Thu Sep 25 14:43:36 2025 +0200

    bcm4908: 6.12: refresh patches
    
    Drop upstreamed patches:
    * 130-arm64-dts-broadcom-bcmbca-bcm4908-set-brcm-wp-not-co.patch
    
    All other patches automatically refreshed.
    
    Signed-off-by: Stefan Kalscheuer <stefan at stklcode.de>
    Link: https://github.com/openwrt/openwrt/pull/20169
    Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 ...roadcom-bcmbca-bcm4908-set-brcm-wp-not-co.patch | 31 ----------------------
 ...sa-bcm_sf2-enable-GPHY-for-switch-probing.patch |  2 +-
 ...-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch |  2 +-
 3 files changed, 2 insertions(+), 33 deletions(-)

diff --git a/target/linux/bcm4908/patches-6.12/130-arm64-dts-broadcom-bcmbca-bcm4908-set-brcm-wp-not-co.patch b/target/linux/bcm4908/patches-6.12/130-arm64-dts-broadcom-bcmbca-bcm4908-set-brcm-wp-not-co.patch
deleted file mode 100644
index a6e174da7c..0000000000
--- a/target/linux/bcm4908/patches-6.12/130-arm64-dts-broadcom-bcmbca-bcm4908-set-brcm-wp-not-co.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal at milecki.pl>
-Date: Thu, 28 Mar 2024 10:24:34 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: set
- brcm,wp-not-connected
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Every described BCM4908 board has WP pin not connected. This caused
-problems for drivers since day 0 but there was no property to describe
-that properly. Projects like OpenWrt were modifying Linux driver to deal
-with it.
-
-It's not clear if that is hardware limitation or just reference design
-being copied over and over but this applies to all known / supported
-BCM4908 boards. Handle it by marking WP as not connected by default.
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
----
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -594,6 +594,7 @@
- 			reg-names = "nand", "nand-int-base";
- 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- 			interrupt-names = "nand_ctlrdy";
-+			brcm,wp-not-connected;
- 			status = "okay";
- 
- 			nandcs: nand at 0 {
diff --git a/target/linux/bcm4908/patches-6.12/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch b/target/linux/bcm4908/patches-6.12/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
index 8961bb298c..b3ccf1623a 100644
--- a/target/linux/bcm4908/patches-6.12/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
+++ b/target/linux/bcm4908/patches-6.12/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch
@@ -29,7 +29,7 @@ Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
 
 --- a/drivers/net/dsa/bcm_sf2.c
 +++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1524,10 +1524,14 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1539,10 +1539,14 @@ static int bcm_sf2_sw_probe(struct platf
  	rev = reg_readl(priv, REG_PHY_REVISION);
  	priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
  
diff --git a/target/linux/bcm4908/patches-6.12/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch b/target/linux/bcm4908/patches-6.12/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
index ff3f44910b..36b1c23946 100644
--- a/target/linux/bcm4908/patches-6.12/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
+++ b/target/linux/bcm4908/patches-6.12/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch
@@ -15,7 +15,7 @@ Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
 
 --- a/drivers/net/dsa/bcm_sf2.c
 +++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1538,6 +1538,12 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1553,6 +1553,12 @@ static int bcm_sf2_sw_probe(struct platf
  		 priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
  		 priv->irq0, priv->irq1);