[openwrt/openwrt] kirkwood: kernel: remove 6.6 version support
LEDE Commits
lede-commits at lists.infradead.org
Sun Nov 9 13:56:45 PST 2025
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/ef93221841b54956bd5022d746b1367d24999b7d
commit ef93221841b54956bd5022d746b1367d24999b7d
Author: Pawel Dembicki <paweldembicki at gmail.com>
AuthorDate: Thu Nov 6 12:55:04 2025 +0100
kirkwood: kernel: remove 6.6 version support
After switching to 6.12, time to remove 6.6 support.
Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20672
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
target/linux/kirkwood/config-6.6 | 310 ---------------------
target/linux/kirkwood/patches-6.6/100-ib62x0.patch | 53 ----
.../linux/kirkwood/patches-6.6/101-iconnect.patch | 80 ------
.../linux/kirkwood/patches-6.6/102-dockstar.patch | 62 -----
.../kirkwood/patches-6.6/103-iomega-ix2-200.patch | 71 -----
.../patches-6.6/105-linksys-viper-dts.patch | 59 ----
.../linux/kirkwood/patches-6.6/106-goflexnet.patch | 53 ----
...07-01-zyxel-nsa3x0-common-nand-partitions.patch | 48 ----
.../linux/kirkwood/patches-6.6/107-03-nsa325.patch | 54 ----
.../kirkwood/patches-6.6/109-pogoplug_v4.patch | 87 ------
.../linux/kirkwood/patches-6.6/110-pogo_e02.patch | 68 -----
target/linux/kirkwood/patches-6.6/111-l-50.patch | 47 ----
.../kirkwood/patches-6.6/112-sheevaplug.patch | 47 ----
.../kirkwood/patches-6.6/113-readynas_duo_v2.patch | 76 -----
.../kirkwood/patches-6.6/114-ctera-c-200-v1.patch | 58 ----
.../linux/kirkwood/patches-6.6/115-nsa310s.patch | 35 ---
.../kirkwood/patches-6.6/116-4i-edge-200.patch | 34 ---
.../kirkwood/patches-6.6/117-netgear_stora.patch | 10 -
.../linux/kirkwood/patches-6.6/118-dns-320l.patch | 35 ---
...01-enable-sata-port-specific-led-triggers.patch | 10 -
.../patches-6.6/202-linksys-find-active-root.patch | 62 -----
.../patches-6.6/203-blackarmor-nas220.patch | 101 -------
22 files changed, 1460 deletions(-)
diff --git a/target/linux/kirkwood/config-6.6 b/target/linux/kirkwood/config-6.6
deleted file mode 100644
index 79306bee75..0000000000
--- a/target/linux/kirkwood/config-6.6
+++ /dev/null
@@ -1,310 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_CPU_AUTO=y
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-CONFIG_ARCH_MULTI_V5=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-# CONFIG_ARMADA_37XX_WATCHDOG is not set
-# CONFIG_ARMADA_THERMAL is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_HAS_GROUP_RELOCS=y
-# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_GF128MUL=y
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=2
-CONFIG_DEBUG_UART_PHYS=0xf1012000
-CONFIG_DEBUG_UART_VIRT=0xfed12000
-CONFIG_DMA_OPS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FORCE_PCI=y
-CONFIG_FS_IOMAP=y
-CONFIG_FUNCTION_ALIGNMENT=0
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GRO_CELLS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQSTACKS=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KIRKWOOD_CLK=y
-CONFIG_KIRKWOOD_THERMAL=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_NETXBIG=y
-CONFIG_LEDS_NS2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MIGRATION=y
-CONFIG_MMU_LAZY_TLB_REFCOUNT=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-# CONFIG_MTD_NAND_MARVELL is not set
-CONFIG_MTD_NAND_ORION=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MV643XX_ETH=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-# CONFIG_MVNETA is not set
-# CONFIG_MVPP2 is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_EGRESS=y
-CONFIG_NET_INGRESS=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_XGRESS=y
-CONFIG_NLS=y
-CONFIG_NVMEM=y
-CONFIG_NVMEM_LAYOUTS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_IRQCHIP=y
-CONFIG_ORION_TIMER=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-CONFIG_PCI=y
-CONFIG_PCI_BRIDGE_EMUL=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_A3700_UTMI is not set
-# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
-CONFIG_PHY_MVEBU_SATA=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_KIRKWOOD=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_SX150X=y
-CONFIG_PLAT_ORION=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_LINKSTATION=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-# CONFIG_SERIAL_MVEBU_UART is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SOC_BUS=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ORION=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SWPHY=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_LED_TRIG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMMON=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/kirkwood/patches-6.6/100-ib62x0.patch b/target/linux/kirkwood/patches-6.6/100-ib62x0.patch
deleted file mode 100644
index 1ee05f837f..0000000000
--- a/target/linux/kirkwood/patches-6.6/100-ib62x0.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
-@@ -6,7 +6,14 @@
-
- / {
- model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+ aliases {
-+ led-boot = &led_green_os;
-+ led-failsafe = &led_red_os;
-+ led-running = &led_green_os;
-+ led-upgrade = &led_red_os;
-+ };
-
- memory {
- device_type = "memory";
-@@ -81,12 +88,12 @@
- &pmx_led_usb_transfer>;
- pinctrl-names = "default";
-
-- green-os {
-+ led_green_os: green-os {
- label = "ib62x0:green:os";
- gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
-- default-state = "keep";
-+ default-state = "on";
- };
-- red-os {
-+ led_red_os: red-os {
- label = "ib62x0:red:os";
- gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- };
-@@ -118,13 +125,13 @@
- };
-
- partition at 100000 {
-- label = "uImage";
-- reg = <0x0100000 0x600000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition at 700000 {
-- label = "root";
-- reg = <0x0700000 0xf900000>;
-+ partition at 200000 {
-+ label = "ubi";
-+ reg = <0x200000 0xfe00000>;
- };
-
- };
diff --git a/target/linux/kirkwood/patches-6.6/101-iconnect.patch b/target/linux/kirkwood/patches-6.6/101-iconnect.patch
deleted file mode 100644
index cd1813d0a6..0000000000
--- a/target/linux/kirkwood/patches-6.6/101-iconnect.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
-@@ -8,6 +8,13 @@
- model = "Iomega Iconnect";
- compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_power_blue;
-+ led-failsafe = &led_power_red;
-+ led-running = &led_power_blue;
-+ led-upgrade = &led_power_red;
-+ };
-+
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
-@@ -16,8 +23,6 @@
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
-- linux,initrd-start = <0x4500040>;
-- linux,initrd-end = <0x4800000>;
- };
-
- ocp at f1000000 {
-@@ -89,12 +94,12 @@
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-- power-blue {
-+ led_power_blue: power-blue {
- label = "power:blue";
- gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-- default-state = "keep";
-+ default-state = "on";
- };
-- power-red {
-+ led_power_red: power-red {
- label = "power:red";
- gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- };
-@@ -146,28 +151,23 @@
- status = "okay";
-
- partition at 0 {
-- label = "uboot";
-- reg = <0x0000000 0xc0000>;
-+ label = "u-boot";
-+ reg = <0x0000000 0xe0000>;
- };
-
-- partition at a0000 {
-- label = "env";
-- reg = <0xa0000 0x20000>;
-+ partition at e0000 {
-+ label = "u-boot environment";
-+ reg = <0xe0000 0x100000>;
- };
-
- partition at 100000 {
-- label = "zImage";
-- reg = <0x100000 0x300000>;
-- };
--
-- partition at 540000 {
-- label = "initrd";
-- reg = <0x540000 0x300000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition at 980000 {
-- label = "boot";
-- reg = <0x980000 0x1f400000>;
-+ partition at 200000 {
-+ label = "ubi";
-+ reg = <0x200000 0x1fe00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-6.6/102-dockstar.patch b/target/linux/kirkwood/patches-6.6/102-dockstar.patch
deleted file mode 100644
index e97f15cab4..0000000000
--- a/target/linux/kirkwood/patches-6.6/102-dockstar.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
-@@ -8,6 +8,13 @@
- model = "Seagate FreeAgent Dockstar";
- compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_health;
-+ led-failsafe = &led_fault;
-+ led-running = &led_health;
-+ led-upgrade = &led_fault;
-+ };
-+
- memory {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
-@@ -42,12 +49,12 @@
- pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
- pinctrl-names = "default";
-
-- health {
-+ led_health: health {
- label = "status:green:health";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-- default-state = "keep";
-+ default-state = "on";
- };
-- fault {
-+ led_fault: fault {
- label = "status:orange:fault";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-@@ -78,18 +85,22 @@
-
- partition at 0 {
- label = "u-boot";
-- reg = <0x0000000 0x100000>;
-- read-only;
-+ reg = <0x0000000 0xe0000>;
-+ };
-+
-+ partition at e0000 {
-+ label = "u-boot environment";
-+ reg = <0xe0000 0x100000>;
- };
-
- partition at 100000 {
-- label = "uImage";
-- reg = <0x0100000 0x400000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition at 500000 {
-- label = "data";
-- reg = <0x0500000 0xfb00000>;
-+ partition at 200000 {
-+ label = "ubi";
-+ reg = <0x200000 0xfe00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-6.6/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-6.6/103-iomega-ix2-200.patch
deleted file mode 100644
index 0251a10600..0000000000
--- a/target/linux/kirkwood/patches-6.6/103-iomega-ix2-200.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
-@@ -8,6 +8,13 @@
- model = "Iomega StorCenter ix2-200";
- compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_power;
-+ led-failsafe = &led_health;
-+ led-running = &led_power;
-+ led-upgrade = &led_health;
-+ };
-+
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
-@@ -127,16 +134,16 @@
- &pmx_led_rebuild &pmx_led_health >;
- pinctrl-names = "default";
-
-- power_led {
-+ led_power: power_led {
- label = "status:white:power_led";
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-- default-state = "keep";
-+ default-state = "on";
- };
- rebuild_led {
- label = "status:white:rebuild_led";
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- };
-- health_led {
-+ led_health: health_led {
- label = "status:red:health_led";
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- };
-@@ -186,19 +193,19 @@
- };
-
- partition at a0000 {
-- label = "env";
-+ label = "u-boot environment";
- reg = <0xa0000 0x20000>;
- read-only;
- };
-
- partition at 100000 {
-- label = "uImage";
-- reg = <0x100000 0x300000>;
-+ label = "kernel";
-+ reg = <0x100000 0x400000>;
- };
-
-- partition at 400000 {
-- label = "rootfs";
-- reg = <0x400000 0x1C00000>;
-+ partition at 500000 {
-+ label = "ubi";
-+ reg = <0x500000 0x1C00000>;
- };
- };
-
-@@ -211,7 +218,7 @@
- };
-
- ð0 {
-- status = "okay";
-+ status = "disabled";
- ethernet0-port at 0 {
- speed = <1000>;
- duplex = <1>;
diff --git a/target/linux/kirkwood/patches-6.6/105-linksys-viper-dts.patch b/target/linux/kirkwood/patches-6.6/105-linksys-viper-dts.patch
deleted file mode 100644
index 6eb83003a2..0000000000
--- a/target/linux/kirkwood/patches-6.6/105-linksys-viper-dts.patch
+++ /dev/null
@@ -1,59 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
-@@ -24,6 +24,10 @@
- };
-
- aliases {
-+ led-boot = &led_white_health;
-+ led-failsafe = &led_white_health;
-+ led-running = &led_white_health;
-+ led-upgrade = &led_white_health;
- serial0 = &uart0;
- };
-
-@@ -56,9 +60,10 @@
- pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
- pinctrl-names = "default";
-
-- white-health {
-+ led_white_health: white-health {
- label = "viper:white:health";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
- };
-
- white-pulse {
-@@ -114,23 +119,23 @@
- };
-
- partition at 200000 {
-- label = "kernel";
-- reg = <0x200000 0x2A0000>;
-+ label = "kernel1";
-+ reg = <0x200000 0x1A00000>;
- };
-
-- partition at 4a0000 {
-- label = "rootfs";
-- reg = <0x4A0000 0x1760000>;
-+ partition at 600000 {
-+ label = "rootfs1";
-+ reg = <0x600000 0x1600000>;
- };
-
- partition at 1c00000 {
-- label = "alt_kernel";
-- reg = <0x1C00000 0x2A0000>;
-+ label = "kernel2";
-+ reg = <0x1C00000 0x1A00000>;
- };
-
-- partition at 1ea0000 {
-- label = "alt_rootfs";
-- reg = <0x1EA0000 0x1760000>;
-+ partition at 2000000 {
-+ label = "rootfs2";
-+ reg = <0x2000000 0x1600000>;
- };
-
- partition at 3600000 {
diff --git a/target/linux/kirkwood/patches-6.6/106-goflexnet.patch b/target/linux/kirkwood/patches-6.6/106-goflexnet.patch
deleted file mode 100644
index b664009b85..0000000000
--- a/target/linux/kirkwood/patches-6.6/106-goflexnet.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
-@@ -8,6 +8,13 @@
- model = "Seagate GoFlex Net";
- compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_health;
-+ led-failsafe = &led_fault;
-+ led-running = &led_health;
-+ led-upgrade = &led_fault;
-+ };
-+
- memory {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
-@@ -85,12 +92,12 @@
- >;
- pinctrl-names = "default";
-
-- health {
-+ led_health: health {
- label = "status:green:health";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-- default-state = "keep";
-+ default-state = "on";
- };
-- fault {
-+ led_fault: fault {
- label = "status:orange:fault";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-@@ -159,18 +166,8 @@
- };
-
- partition at 100000 {
-- label = "uImage";
-- reg = <0x0100000 0x400000>;
-- };
--
-- partition at 500000 {
-- label = "pogoplug";
-- reg = <0x0500000 0x2000000>;
-- };
--
-- partition at 2500000 {
-- label = "root";
-- reg = <0x02500000 0xd800000>;
-+ label = "ubi";
-+ reg = <0x0100000 0x0ff00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-6.6/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-6.6/107-01-zyxel-nsa3x0-common-nand-partitions.patch
deleted file mode 100644
index a73d82b892..0000000000
--- a/target/linux/kirkwood/patches-6.6/107-01-zyxel-nsa3x0-common-nand-partitions.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
-+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
-@@ -112,40 +112,16 @@
-
- partition at 0 {
- label = "uboot";
-- reg = <0x0000000 0x0100000>;
-+ reg = <0x0000000 0x00c0000>;
- read-only;
- };
- partition at 100000 {
- label = "uboot_env";
-- reg = <0x0100000 0x0080000>;
-+ reg = <0x00c0000 0x0080000>;
- };
-- partition at 180000 {
-- label = "key_store";
-- reg = <0x0180000 0x0080000>;
-- };
-- partition at 200000 {
-- label = "info";
-- reg = <0x0200000 0x0080000>;
-- };
-- partition at 280000 {
-- label = "etc";
-- reg = <0x0280000 0x0a00000>;
-- };
-- partition at c80000 {
-- label = "kernel_1";
-- reg = <0x0c80000 0x0a00000>;
-- };
-- partition at 1680000 {
-- label = "rootfs1";
-- reg = <0x1680000 0x2fc0000>;
-- };
-- partition at 4640000 {
-- label = "kernel_2";
-- reg = <0x4640000 0x0a00000>;
-- };
-- partition at 5040000 {
-- label = "rootfs2";
-- reg = <0x5040000 0x2fc0000>;
-+ partition at 140000 {
-+ label = "ubi";
-+ reg = <0x0140000 0x7ec0000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-6.6/107-03-nsa325.patch b/target/linux/kirkwood/patches-6.6/107-03-nsa325.patch
deleted file mode 100644
index b3f19924db..0000000000
--- a/target/linux/kirkwood/patches-6.6/107-03-nsa325.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
-@@ -15,6 +15,13 @@
- model = "ZyXEL NSA325";
- compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_green_sys;
-+ led-failsafe = &led_orange_sys;
-+ led-running = &led_green_sys;
-+ led-upgrade = &led_orange_sys;
-+ };
-+
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
-@@ -162,17 +169,19 @@
- &pmx_led_hdd1_green &pmx_led_hdd1_red>;
- pinctrl-names = "default";
-
-- green-sys {
-+ led_green_sys: green-sys {
- label = "nsa325:green:sys";
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
- };
-- orange-sys {
-+ led_orange_sys: orange-sys {
- label = "nsa325:orange:sys";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
- green-hdd1 {
- label = "nsa325:green:hdd1";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "ata1";
- };
- red-hdd1 {
- label = "nsa325:red:hdd1";
-@@ -181,6 +190,7 @@
- green-hdd2 {
- label = "nsa325:green:hdd2";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "ata2";
- };
- red-hdd2 {
- label = "nsa325:red:hdd2";
-@@ -189,6 +199,7 @@
- green-usb {
- label = "nsa325:green:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "usb-host";
- };
- green-copy {
- label = "nsa325:green:copy";
diff --git a/target/linux/kirkwood/patches-6.6/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-6.6/109-pogoplug_v4.patch
deleted file mode 100644
index ed7e4e4ff0..0000000000
--- a/target/linux/kirkwood/patches-6.6/109-pogoplug_v4.patch
+++ /dev/null
@@ -1,87 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
-@@ -18,12 +18,20 @@
- compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
- "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_health;
-+ led-failsafe = &led_fault;
-+ led-running = &led_health;
-+ led-upgrade = &led_fault;
-+ };
-+
- memory {
- device_type = "memory";
- reg = <0x00000000 0x08000000>;
- };
-
- chosen {
-+ bootargs = "console=ttyS0,115200";
- stdout-path = "uart0:115200n8";
- };
-
-@@ -37,8 +45,8 @@
- eject {
- debounce-interval = <50>;
- wakeup-source;
-- linux,code = <KEY_EJECTCD>;
-- label = "Eject Button";
-+ linux,code = <KEY_RESTART>;
-+ label = "Reset";
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
- };
-@@ -48,12 +56,12 @@
- pinctrl-0 = <&pmx_led_green &pmx_led_red>;
- pinctrl-names = "default";
-
-- health {
-+ led_health: health {
- label = "pogoplugv4:green:health";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-- fault {
-+ led_fault: fault {
- label = "pogoplugv4:red:fault";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
-@@ -137,29 +145,19 @@
- #size-cells = <1>;
-
- partition at 0 {
-- label = "u-boot";
-- reg = <0x00000000 0x200000>;
-+ label = "uboot";
-+ reg = <0x00000000 0x1c0000>;
- read-only;
- };
-
-- partition at 200000 {
-- label = "uImage";
-- reg = <0x00200000 0x300000>;
-- };
--
-- partition at 500000 {
-- label = "uImage2";
-- reg = <0x00500000 0x300000>;
-- };
--
-- partition at 800000 {
-- label = "failsafe";
-- reg = <0x00800000 0x800000>;
-+ partition at 1c0000 {
-+ label = "uboot_env";
-+ reg = <0x001c0000 0x40000>;
- };
-
-- partition at 1000000 {
-- label = "root";
-- reg = <0x01000000 0x7000000>;
-+ partition at 200000 {
-+ label = "ubi";
-+ reg = <0x00200000 0x7e00000>;
- };
- };
- };
diff --git a/target/linux/kirkwood/patches-6.6/110-pogo_e02.patch b/target/linux/kirkwood/patches-6.6/110-pogo_e02.patch
deleted file mode 100644
index 21b929dda7..0000000000
--- a/target/linux/kirkwood/patches-6.6/110-pogo_e02.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
-@@ -20,6 +20,13 @@
- compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
- "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_health;
-+ led-failsafe = &led_fault;
-+ led-running = &led_health;
-+ led-upgrade = &led_fault;
-+ };
-+
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
-@@ -33,12 +40,12 @@
- gpio-leds {
- compatible = "gpio-leds";
-
-- health {
-+ led_health: health {
- label = "pogo_e02:green:health";
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-- default-state = "keep";
-+ default-state = "on";
- };
-- fault {
-+ led_fault: fault {
- label = "pogo_e02:orange:fault";
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- };
-@@ -95,24 +102,24 @@
- status = "okay";
-
- partition at 0 {
-- label = "u-boot";
-- reg = <0x0000000 0x100000>;
-+ label = "uboot";
-+ reg = <0x0 0xe0000>;
- read-only;
- };
-
-- partition at 100000 {
-- label = "uImage";
-- reg = <0x0100000 0x400000>;
-+ partition at e0000 {
-+ label = "uboot_env";
-+ reg = <0xe0000 0x20000>;
- };
-
-- partition at 500000 {
-- label = "pogoplug";
-- reg = <0x0500000 0x2000000>;
-+ partition at 100000 {
-+ label = "second_stage_uboot";
-+ reg = <0x100000 0x100000>;
- };
-
-- partition at 2500000 {
-- label = "root";
-- reg = <0x02500000 0x5b00000>;
-+ partition at 200000 {
-+ label = "ubi";
-+ reg = <0x200000 0x7e00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-6.6/111-l-50.patch b/target/linux/kirkwood/patches-6.6/111-l-50.patch
deleted file mode 100644
index af6aa80b6d..0000000000
--- a/target/linux/kirkwood/patches-6.6/111-l-50.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
-@@ -18,6 +18,13 @@
- reg = <0x00000000 0x20000000>;
- };
-
-+ aliases {
-+ led-boot = &led_status_green;
-+ led-failsafe = &led_status_red;
-+ led-running = &led_status_green;
-+ led-upgrade = &led_status_red;
-+ };
-+
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
-@@ -97,12 +104,12 @@
- leds {
- compatible = "gpio-leds";
-
-- status_green {
-+ led_status_green: status_green {
- label = "l-50:green:status";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
-- status_red {
-+ led_status_red: status_red {
- label = "l-50:red:status";
- gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
- };
-@@ -351,13 +358,8 @@
- };
-
- partition at 100000 {
-- label = "kernel-1";
-- reg = <0x00100000 0x00800000>;
-- };
--
-- partition at 900000 {
-- label = "rootfs-1";
-- reg = <0x00900000 0x07100000>;
-+ label = "ubi";
-+ reg = <0x00100000 0x07900000>;
- };
-
- partition at 7a00000 {
diff --git a/target/linux/kirkwood/patches-6.6/112-sheevaplug.patch b/target/linux/kirkwood/patches-6.6/112-sheevaplug.patch
deleted file mode 100644
index e8e83bdbba..0000000000
--- a/target/linux/kirkwood/patches-6.6/112-sheevaplug.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
-+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
-@@ -78,13 +78,8 @@
- };
-
- partition at 100000 {
-- label = "uImage";
-- reg = <0x0100000 0x400000>;
-- };
--
-- partition at 500000 {
-- label = "root";
-- reg = <0x0500000 0x1fb00000>;
-+ label = "ubi";
-+ reg = <0x0100000 0x1ff00000>;
- };
- };
-
---- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
-@@ -13,6 +13,13 @@
- model = "Globalscale Technologies SheevaPlug";
- compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_health;
-+ led-failsafe = &led_health;
-+ led-running = &led_health;
-+ led-upgrade = &led_health;
-+ };
-+
- ocp at f1000000 {
- mvsdio at 90000 {
- pinctrl-0 = <&pmx_sdio>;
-@@ -28,10 +35,10 @@
- pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
- pinctrl-names = "default";
-
-- health {
-+ led_health: health {
- label = "sheevaplug:blue:health";
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-- default-state = "keep";
-+ default-state = "on";
- };
-
- misc {
diff --git a/target/linux/kirkwood/patches-6.6/113-readynas_duo_v2.patch b/target/linux/kirkwood/patches-6.6/113-readynas_duo_v2.patch
deleted file mode 100644
index 9cb2ad102c..0000000000
--- a/target/linux/kirkwood/patches-6.6/113-readynas_duo_v2.patch
+++ /dev/null
@@ -1,76 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
-@@ -19,6 +19,13 @@
- reg = <0x00000000 0x10000000>;
- };
-
-+ aliases {
-+ led-boot = &led_power;
-+ led-failsafe = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_power;
-+ };
-+
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
-@@ -115,7 +122,7 @@
- &pmx_led_blue_backup >;
- pinctrl-names = "default";
-
-- power_led {
-+ led_power: power_led {
- label = "status:blue:power_led";
- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
- default-state = "keep";
-@@ -129,11 +136,13 @@
- disk1_led {
- label = "status:blue:disk1_led";
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata1";
- };
-
- disk2_led {
- label = "status:blue:disk2_led";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata2";
- };
-
- backup_led {
-@@ -150,7 +159,13 @@
-
- power-button {
- label = "Power Button";
-- linux,code = <KEY_POWER>;
-+ /* Power button and INT pin from PHY are both connected
-+ * to this GPIO. Every network restart causes PHY restart
-+ * and button is pressed. It's difficult to use it as
-+ * KEY_POWER without changes in kernel (or netifd) so
-+ * the button is configured as regular one.
-+ */
-+ linux,code = <BTN_1>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
-@@ -208,18 +223,13 @@
- };
-
- partition at 200000 {
-- label = "uImage";
-+ label = "kernel";
- reg = <0x0200000 0x600000>;
- };
-
- partition at 800000 {
-- label = "minirootfs";
-- reg = <0x0800000 0x1000000>;
-- };
--
-- partition at 1800000 {
-- label = "jffs2";
-- reg = <0x1800000 0x6800000>;
-+ label = "ubi";
-+ reg = <0x0800000 0x7800000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-6.6/114-ctera-c-200-v1.patch b/target/linux/kirkwood/patches-6.6/114-ctera-c-200-v1.patch
deleted file mode 100644
index 7e93089616..0000000000
--- a/target/linux/kirkwood/patches-6.6/114-ctera-c-200-v1.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
-@@ -14,6 +14,14 @@
- model = "Ctera C200 V1";
- compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-+
-+ aliases {
-+ led-boot = &led_status_green;
-+ led-failsafe = &led_status_red;
-+ led-running = &led_status_green;
-+ led-upgrade = &led_status_red;
-+ };
-+
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
-@@ -78,6 +86,7 @@
- function-enumerator = <1>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata1";
- };
-
- led-2 {
-@@ -85,6 +94,7 @@
- function-enumerator = <2>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata2";
- };
-
- led-3 {
-@@ -94,13 +104,13 @@
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
-- led-4 {
-+ led_status_red: led-4 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
-- led-5 {
-+ led_status_green: led-5 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-@@ -240,7 +250,7 @@
- };
-
- partition at 7a00000 {
-- label = "rootfs";
-+ label = "ubi";
- reg = <0x7a00000 0x8600000>;
- };
- };
diff --git a/target/linux/kirkwood/patches-6.6/115-nsa310s.patch b/target/linux/kirkwood/patches-6.6/115-nsa310s.patch
deleted file mode 100644
index 2f43dd960c..0000000000
--- a/target/linux/kirkwood/patches-6.6/115-nsa310s.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
-@@ -16,6 +16,13 @@
- model = "ZyXEL NSA310S";
- compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_green_sys;
-+ led-failsafe = &led_red_sys;
-+ led-running = &led_green_sys;
-+ led-upgrade = &led_red_sys;
-+ };
-+
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
-@@ -96,14 +103,16 @@
- gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- };
-
-- led-6 {
-+ led_green_sys: led-6 {
-+ label = "nsa310s:green:sys";
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
-- led-7 {
-+ led_red_sys: led-7 {
-+ label = "nsa310s:red:sys";
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/kirkwood/patches-6.6/116-4i-edge-200.patch b/target/linux/kirkwood/patches-6.6/116-4i-edge-200.patch
deleted file mode 100644
index 62a3074097..0000000000
--- a/target/linux/kirkwood/patches-6.6/116-4i-edge-200.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
-@@ -20,6 +20,13 @@
- reg = <0x00000000 0x20000000>;
- };
-
-+ aliases {
-+ led-boot = &led_status_green;
-+ led-failsafe = &led_status_orange;
-+ led-running = &led_status_green;
-+ led-upgrade = &led_status_orange;
-+ };
-+
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
-@@ -37,13 +44,15 @@
- linux,default-trigger = "mmc0";
- };
-
-- led-2 {
-+ led_status_orange: led-2 {
-+ label = "orange:status";
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_AMBER>;
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
-- led-3 {
-+ led_status_green: led-3 {
-+ label = "green:status";
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/kirkwood/patches-6.6/117-netgear_stora.patch b/target/linux/kirkwood/patches-6.6/117-netgear_stora.patch
deleted file mode 100644
index db0bdb4228..0000000000
--- a/target/linux/kirkwood/patches-6.6/117-netgear_stora.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/marvell/Makefile
-+++ b/arch/arm/boot/dts/marvell/Makefile
-@@ -157,6 +157,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-rs411.dtb \
- kirkwood-sheevaplug.dtb \
- kirkwood-sheevaplug-esata.dtb \
-+ kirkwood-stora.dtb \
- kirkwood-t5325.dtb \
- kirkwood-topkick.dtb \
- kirkwood-ts219-6281.dtb \
diff --git a/target/linux/kirkwood/patches-6.6/118-dns-320l.patch b/target/linux/kirkwood/patches-6.6/118-dns-320l.patch
deleted file mode 100644
index 0eb1c05f5b..0000000000
--- a/target/linux/kirkwood/patches-6.6/118-dns-320l.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/arch/arm/boot/dts/marvell/Makefile
-+++ b/arch/arm/boot/dts/marvell/Makefile
-@@ -92,6 +92,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-db-88f6282.dtb \
- kirkwood-dir665.dtb \
- kirkwood-dns320.dtb \
-+ kirkwood-dns320l.dtb \
- kirkwood-dns325.dtb \
- kirkwood-dockstar.dtb \
- kirkwood-dreamplug.dtb \
---- a/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
-@@ -32,6 +32,13 @@
- reg = <0x00000000 0x10000000>;
- };
-
-+ aliases {
-+ led-boot = &led_orange_usb;
-+ led-failsafe = &led_orange_usb;
-+ led-running = &led_orange_usb;
-+ led-upgrade = &led_orange_usb;
-+ };
-+
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
-@@ -78,7 +85,7 @@
- linux,default-trigger = "usbport";
- };
-
-- orange-usb {
-+ led_orange_usb: orange-usb {
- label = "dns320l:usb:orange";
- gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- };
diff --git a/target/linux/kirkwood/patches-6.6/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-6.6/201-enable-sata-port-specific-led-triggers.patch
deleted file mode 100644
index 3db362de9f..0000000000
--- a/target/linux/kirkwood/patches-6.6/201-enable-sata-port-specific-led-triggers.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -115,6 +115,7 @@ config MACH_DOVE
- config MACH_KIRKWOOD
- bool "Marvell Kirkwood boards"
- depends on ARCH_MULTI_V5
-+ select ARCH_WANT_LIBATA_LEDS
- select CPU_FEROCEON
- select GPIOLIB
- select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-6.6/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-6.6/202-linksys-find-active-root.patch
deleted file mode 100644
index 5029b1791c..0000000000
--- a/target/linux/kirkwood/patches-6.6/202-linksys-find-active-root.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz at openwrt.org>
----
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-@@ -47,6 +49,7 @@ static int parse_fixed_partitions(struct
- struct mtd_partition *parts;
- struct device_node *mtd_node;
- struct device_node *ofpart_node;
-+ const char *owrtpart = "ubi";
- const char *partname;
- struct device_node *pp;
- int nr_parts, i, ret = 0;
-@@ -152,9 +155,15 @@ static int parse_fixed_partitions(struct
- parts[i].size = of_read_number(reg + a_cells, s_cells);
- parts[i].of_node = pp;
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
-+
- parts[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -271,6 +280,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/kirkwood/patches-6.6/203-blackarmor-nas220.patch b/target/linux/kirkwood/patches-6.6/203-blackarmor-nas220.patch
deleted file mode 100644
index ab596ce75f..0000000000
--- a/target/linux/kirkwood/patches-6.6/203-blackarmor-nas220.patch
+++ /dev/null
@@ -1,101 +0,0 @@
---- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
-+++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
-@@ -17,6 +17,13 @@
- compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
- "marvell,kirkwood";
-
-+ aliases {
-+ led-boot = &led_status_amber;
-+ led-failsafe = &led_status_amber;
-+ led-running = &led_status_blue;
-+ led-upgrade = &led_status_amber;
-+ };
-+
- memory { /* 128 MB */
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
-@@ -36,14 +43,14 @@
- compatible = "gpio-keys";
-
- reset {
-- label = "Reset";
-- linux,code = <KEY_POWER>;
-+ label = "Reset Button";
-+ linux,code = <KEY_RESTART>;
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
-- button {
-- label = "Power";
-- linux,code = <KEY_SLEEP>;
-+ power {
-+ label = "Power Button";
-+ linux,code = <KEY_POWER>;
- gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- };
- };
-@@ -51,11 +58,27 @@
- gpio-leds {
- compatible = "gpio-leds";
-
-- blue-power {
-+ led_power_blue: power_blue {
- label = "nas220:blue:power";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-+
-+ disk_blue {
-+ label = "nas220:blue:disk";
-+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "disk-activity";
-+ };
-+
-+ led_status_blue: status_blue {
-+ label = "nas220:blue:status";
-+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ led_status_amber: status_amber {
-+ label = "nas220:amber:status";
-+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+ };
- };
-
- regulators {
-@@ -153,6 +176,35 @@
-
- &nand {
- status = "okay";
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition at 0 {
-+ label = "uboot";
-+ reg = <0x0 0xa0000>;
-+ read-only;
-+ };
-+
-+ partition at a0000 {
-+ label = "uboot-env";
-+ reg = <0xa0000 0x10000>;
-+ read-only;
-+ };
-+
-+ partition at b0000 {
-+ label = "reserved";
-+ reg = <0xb0000 0x10000>;
-+ read-only;
-+ };
-+
-+ partition at c0000 {
-+ label = "ubi";
-+ reg = <0xc0000 0x1e80000>;
-+ };
-+ };
- };
-
- &mdio {
More information about the lede-commits
mailing list