[openwrt/openwrt] mediatek: filogic: migrate Zyxel EX5700 to upstream PHY LED control

[LEDE Commits]

dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/b88de5d50729dda421657f425f1dd0f1fb446c55

commit b88de5d50729dda421657f425f1dd0f1fb446c55
Author: Aleksander Jan Bajkowski <olek2 at wp.pl>
AuthorDate: Sat Mar 1 15:28:33 2025 +0100

    mediatek: filogic: migrate Zyxel EX5700 to upstream PHY LED control
    
    This commit switches the control of the leds connected to the Maxlinear
    GPY211C PHY to an upstream solution. There should be no functional changes.
    
    Signed-off-by: Aleksander Jan Bajkowski <olek2 at wp.pl>
---
 .../mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts  | 36 ++++++++++++++++++++--
 .../filogic/base-files/etc/board.d/01_leds         |  6 ++++
 2 files changed, 40 insertions(+), 2 deletions(-)

diff --git a/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts
index 51147c1d81..c36cc58d5d 100644
--- a/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts
+++ b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts
@@ -158,13 +158,45 @@
 	phy5: phy at 5 {
 		compatible = "ethernet-phy-ieee802.3-c45";
 		reg = <5>;
-		mxl,led-config = <0x3f0 0x330 0x0 0x0>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led-0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+			};
+
+			led-1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+			};
+		};
 	};
 
 	phy6: phy at 6 {
 		compatible = "ethernet-phy-ieee802.3-c45";
 		reg = <6>;
-		mxl,led-config = <0x3f0 0x330 0x0 0x0>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led-0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+			};
+
+			led-1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_WAN;
+			};
+		};
 	};
 
 	switch: switch at 1f {
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 5f56685343..a1205e9556 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -163,6 +163,12 @@ zyxel,nwa50ax-pro)
 	ucidef_set_led_netdev "uplink" "UPLINK" "mdio-bus:05:amber:wan" "eth0" "link_10 link_100 link_2500 tx rx"
 	ucidef_set_led_netdev "uplink" "UPLINK" "mdio-bus:05:green:wan" "eth0" "link_1000 link_2500 tx rx"
 	;;
+zyxel,ex5700-telenor)
+	ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:amber:lan" "lan4" "link_10 link_100 tx rx"
+	ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:green:lan" "lan4" "link tx rx"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:amber:wan" "eth1" "link_10 link_100 tx rx"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:green:wan" "eth1" "link tx rx"
+	;;
 esac
 
 board_config_flush