[openwrt/openwrt] ath79: ZTE MF286A: use specific board definition file for qca9888

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/b60d241f2d5e451b785d368d0dffa3f9a6fa8a36

commit b60d241f2d5e451b785d368d0dffa3f9a6fa8a36
Author: Lech Perczak <lech.perczak at gmail.com>
AuthorDate: Mon Nov 25 00:22:27 2024 +0100

    ath79: ZTE MF286A: use specific board definition file for qca9888
    
    Using board definition file extracted from stock firmware yields 50%
    throughput improvement in RX direction under iperf3 test.
    Make the device use temporary files from firmware_qca-wireless.git
    temporarily, as well as select the specific variant in the device tree
    files.
    
    Signed-off-by: Lech Perczak <lech.perczak at gmail.com>
    Link: https://github.com/openwrt/openwrt/pull/17620
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 target/linux/ath79/dts/qca9563_zte_mf286.dts    | 1 +
 target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi | 1 +
 target/linux/ath79/image/nand.mk                | 2 ++
 3 files changed, 4 insertions(+)

diff --git a/target/linux/ath79/dts/qca9563_zte_mf286.dts b/target/linux/ath79/dts/qca9563_zte_mf286.dts
index 897ecf66ea..3926bacb26 100644
--- a/target/linux/ath79/dts/qca9563_zte_mf286.dts
+++ b/target/linux/ath79/dts/qca9563_zte_mf286.dts
@@ -137,6 +137,7 @@
 &wifi_ath10k {
 	nvmem-cells = <&macaddr_mac_0 1>, <&cal_caldata_5000>, <&precal_caldata_5000>;
 	nvmem-cell-names = "mac-address", "calibration", "pre-calibration";
+	qcom,ath10k-calibration-variant = "ZTE-MF286AR";
 };
 
 &wmac {
diff --git a/target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi b/target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi
index 9a42ea668a..c53d6a3955 100644
--- a/target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi
+++ b/target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi
@@ -134,6 +134,7 @@
 &wifi_ath10k {
 	nvmem-cells = <&macaddr_mac_0 0x20000>, <&precal_art_5000>;
 	nvmem-cell-names = "mac-address", "pre-calibration";
+	qcom,ath10k-calibration-variant = "ZTE-MF286AR";
 };
 
 &wmac {
diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk
index 68cb543187..34c6eccfbd 100644
--- a/target/linux/ath79/image/nand.mk
+++ b/target/linux/ath79/image/nand.mk
@@ -474,6 +474,7 @@ define Device/zte_mf286
   $(Device/zte_mf28x_common)
   DEVICE_MODEL := MF286
   DEVICE_PACKAGES += ath10k-firmware-qca988x-ct ath10k-firmware-qca9888-ct \
+	-ath10k-board-qca9888 ipq-wifi-zte_mf286ar \
 	kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 endef
 TARGET_DEVICES += zte_mf286
@@ -482,6 +483,7 @@ define Device/zte_mf286a
   $(Device/zte_mf28x_common)
   DEVICE_MODEL := MF286A
   DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \
+	-ath10k-board-qca9888 ipq-wifi-zte_mf286ar \
 	kmod-usb-serial-option uqmi
 endef
 TARGET_DEVICES += zte_mf286a