[openwrt/openwrt] ramips: 6.12: automatically rebuilding patches

LEDE Commits lede-commits at lists.infradead.org
Wed Jun 11 05:19:51 PDT 2025


hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/d798bef016695726a6e3f78b921f24583feafebd

commit d798bef016695726a6e3f78b921f24583feafebd
Author: Mieczyslaw Nalewaj <namiltd at yahoo.com>
AuthorDate: Fri May 30 07:59:40 2025 +0200

    ramips: 6.12: automatically rebuilding patches
    
    Automatic rebasing of patches.
    
    Signed-off-by: Mieczyslaw Nalewaj <namiltd at yahoo.com>
    Link: https://github.com/openwrt/openwrt/pull/18654
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 target/linux/ramips/patches-6.12/200-add-ralink-eth.patch      |  4 ++--
 .../patches-6.12/315-owrt-hack-fix-mt7688-cache-issue.patch    |  4 ++--
 ...320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch |  4 ++--
 target/linux/ramips/patches-6.12/324-mt7621-perfctr-fix.patch  |  2 +-
 ...-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch |  2 +-
 .../patches-6.12/720-NET-no-auto-carrier-off-support.patch     |  4 ++--
 .../802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch  |  4 ++--
 .../patches-6.12/804-dma-ralink-add-back-gdma-driver.patch     |  4 ++--
 .../809-pinctrl-mtmips-allow-mux-SDXC-pins-for-mt76x8.patch    |  8 ++++----
 .../830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch        |  2 +-
 ...31-mmc-mtk-sd-initialize-pad-delay-and-drive-strength.patch | 10 +++++-----
 .../ramips/patches-6.12/835-asoc-add-mt7620-support.patch      |  4 ++--
 .../840-serial-add-ugly-custom-baud-rate-hack.patch            |  2 +-
 .../870-Input-sx951x-add-Semtech-SX9512-SX9513-driver.patch    |  4 ++--
 14 files changed, 29 insertions(+), 29 deletions(-)

diff --git a/target/linux/ramips/patches-6.12/200-add-ralink-eth.patch b/target/linux/ramips/patches-6.12/200-add-ralink-eth.patch
index c52c12526b..da1c5aaa5e 100644
--- a/target/linux/ramips/patches-6.12/200-add-ralink-eth.patch
+++ b/target/linux/ramips/patches-6.12/200-add-ralink-eth.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/ethernet/Kconfig
 +++ b/drivers/net/ethernet/Kconfig
-@@ -166,6 +166,7 @@ source "drivers/net/ethernet/pensando/Kc
+@@ -175,6 +175,7 @@ source "drivers/net/ethernet/pensando/Kc
  source "drivers/net/ethernet/qlogic/Kconfig"
  source "drivers/net/ethernet/brocade/Kconfig"
  source "drivers/net/ethernet/qualcomm/Kconfig"
@@ -10,7 +10,7 @@
  source "drivers/net/ethernet/renesas/Kconfig"
 --- a/drivers/net/ethernet/Makefile
 +++ b/drivers/net/ethernet/Makefile
-@@ -77,6 +77,7 @@ obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES)
+@@ -78,6 +78,7 @@ obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES)
  obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
  obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
  obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
diff --git a/target/linux/ramips/patches-6.12/315-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-6.12/315-owrt-hack-fix-mt7688-cache-issue.patch
index 2bb3d55d70..4bf5f6c33a 100644
--- a/target/linux/ramips/patches-6.12/315-owrt-hack-fix-mt7688-cache-issue.patch
+++ b/target/linux/ramips/patches-6.12/315-owrt-hack-fix-mt7688-cache-issue.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 
 --- a/arch/mips/kernel/setup.c
 +++ b/arch/mips/kernel/setup.c
-@@ -706,7 +706,6 @@ static void __init arch_mem_init(char **
+@@ -698,7 +698,6 @@ static void __init arch_mem_init(char **
  	mips_reserve_vmcore();
  
  	mips_parse_crashkernel();
@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
  
  	/*
  	 * In order to reduce the possibility of kernel panic when failed to
-@@ -842,6 +841,7 @@ void __init setup_arch(char **cmdline_p)
+@@ -828,6 +827,7 @@ void __init setup_arch(char **cmdline_p)
  
  	cpu_cache_init();
  	paging_init();
diff --git a/target/linux/ramips/patches-6.12/320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch b/target/linux/ramips/patches-6.12/320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch
index 50329953cf..b1580c4e90 100644
--- a/target/linux/ramips/patches-6.12/320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch
+++ b/target/linux/ramips/patches-6.12/320-MIPS-add-support-for-buggy-MT7621S-core-detection.patch
@@ -41,7 +41,7 @@ Signed-off-by: Mieczyslaw Nalewaj <namiltd at yahoo.com>
 
 --- a/arch/mips/include/asm/mips-cps.h
 +++ b/arch/mips/include/asm/mips-cps.h
-@@ -11,6 +11,8 @@
+@@ -12,6 +12,8 @@
  #include <linux/io.h>
  #include <linux/types.h>
  
@@ -50,7 +50,7 @@ Signed-off-by: Mieczyslaw Nalewaj <namiltd at yahoo.com>
  extern unsigned long __cps_access_bad_size(void)
  	__compiletime_error("Bad size for CPS accessor");
  
-@@ -165,6 +167,10 @@ static inline unsigned int mips_cps_numc
+@@ -166,6 +168,10 @@ static inline unsigned int mips_cps_numc
  	if (!mips_cm_present())
  		return 0;
  
diff --git a/target/linux/ramips/patches-6.12/324-mt7621-perfctr-fix.patch b/target/linux/ramips/patches-6.12/324-mt7621-perfctr-fix.patch
index dfeac7eb99..0aa1884077 100644
--- a/target/linux/ramips/patches-6.12/324-mt7621-perfctr-fix.patch
+++ b/target/linux/ramips/patches-6.12/324-mt7621-perfctr-fix.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ralink/irq-gic.c
 +++ b/arch/mips/ralink/irq-gic.c
-@@ -13,6 +13,12 @@
+@@ -14,6 +14,12 @@
  
  int get_c0_perfcount_int(void)
  {
diff --git a/target/linux/ramips/patches-6.12/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch b/target/linux/ramips/patches-6.12/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch
index f87edd3e67..0183199348 100644
--- a/target/linux/ramips/patches-6.12/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch
+++ b/target/linux/ramips/patches-6.12/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch
@@ -37,7 +37,7 @@ Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
  	depends on MTD_NAND_ECC_MEDIATEK
 --- a/drivers/mtd/nand/raw/Makefile
 +++ b/drivers/mtd/nand/raw/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_n
+@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_n
  obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
  obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
diff --git a/target/linux/ramips/patches-6.12/720-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-6.12/720-NET-no-auto-carrier-off-support.patch
index 58e7ff3725..68c6888332 100644
--- a/target/linux/ramips/patches-6.12/720-NET-no-auto-carrier-off-support.patch
+++ b/target/linux/ramips/patches-6.12/720-NET-no-auto-carrier-off-support.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 
 --- a/drivers/net/phy/phy_device.c
 +++ b/drivers/net/phy/phy_device.c
-@@ -1075,7 +1075,7 @@ static void phy_link_change(struct phy_d
+@@ -295,7 +295,7 @@ static void phy_link_change(struct phy_d
  
  	if (up)
  		netif_carrier_on(netdev);
@@ -21,7 +21,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
  	if (phydev->mii_ts && phydev->mii_ts->link_state)
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -661,6 +661,7 @@ struct phy_device {
+@@ -675,6 +675,7 @@ struct phy_device {
  	unsigned downshifted_rate:1;
  	unsigned is_on_sfp_module:1;
  	unsigned mac_managed_pm:1;
diff --git a/target/linux/ramips/patches-6.12/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-6.12/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
index 23c9ce32d0..ed0de09254 100644
--- a/target/linux/ramips/patches-6.12/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ b/target/linux/ramips/patches-6.12/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
@@ -15,7 +15,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -509,6 +509,14 @@ config GPIO_PXA
+@@ -555,6 +555,14 @@ config GPIO_PXA
  	help
  	  Say yes here to support the PXA GPIO device.
  
@@ -32,7 +32,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
  	depends on ARCH_RENESAS || COMPILE_TEST
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -130,6 +130,7 @@ obj-$(CONFIG_GPIO_PISOSR)		+= gpio-pisos
+@@ -135,6 +135,7 @@ obj-$(CONFIG_GPIO_PISOSR)		+= gpio-pisos
  obj-$(CONFIG_GPIO_PL061)		+= gpio-pl061.o
  obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)	+= gpio-pmic-eic-sprd.o
  obj-$(CONFIG_GPIO_PXA)			+= gpio-pxa.o
diff --git a/target/linux/ramips/patches-6.12/804-dma-ralink-add-back-gdma-driver.patch b/target/linux/ramips/patches-6.12/804-dma-ralink-add-back-gdma-driver.patch
index 3d2bdbaf40..4f39000a5e 100644
--- a/target/linux/ramips/patches-6.12/804-dma-ralink-add-back-gdma-driver.patch
+++ b/target/linux/ramips/patches-6.12/804-dma-ralink-add-back-gdma-driver.patch
@@ -14,7 +14,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
 
 --- a/drivers/dma/Kconfig
 +++ b/drivers/dma/Kconfig
-@@ -532,6 +532,12 @@ config PLX_DMA
+@@ -564,6 +564,12 @@ config PLX_DMA
  	  These are exposed via extra functions on the switch's
  	  upstream port. Each function exposes one DMA channel.
  
@@ -29,7 +29,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
  	depends on ARCH_U8500
 --- a/drivers/dma/Makefile
 +++ b/drivers/dma/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_PL330_DMA) += pl330.o
+@@ -69,6 +69,7 @@ obj-$(CONFIG_PL330_DMA) += pl330.o
  obj-$(CONFIG_PLX_DMA) += plx_dma.o
  obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
  obj-$(CONFIG_PXA_DMA) += pxa_dma.o
diff --git a/target/linux/ramips/patches-6.12/809-pinctrl-mtmips-allow-mux-SDXC-pins-for-mt76x8.patch b/target/linux/ramips/patches-6.12/809-pinctrl-mtmips-allow-mux-SDXC-pins-for-mt76x8.patch
index 69dcd7fb2c..17add6054e 100644
--- a/target/linux/ramips/patches-6.12/809-pinctrl-mtmips-allow-mux-SDXC-pins-for-mt76x8.patch
+++ b/target/linux/ramips/patches-6.12/809-pinctrl-mtmips-allow-mux-SDXC-pins-for-mt76x8.patch
@@ -62,7 +62,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
  #define MT76X8_GPIO_MODE_WDT		14
  #define MT76X8_GPIO_MODE_SPI		12
  #define MT76X8_GPIO_MODE_SDMODE		10
-@@ -74,6 +78,12 @@ static struct mtmips_pmx_func refclk_grp
+@@ -68,6 +72,12 @@ static struct mtmips_pmx_func refclk_grp
  static struct mtmips_pmx_func perst_grp[] = { FUNC("perst", 0, 36, 1) };
  static struct mtmips_pmx_func wdt_grp[] = { FUNC("wdt", 0, 38, 1) };
  static struct mtmips_pmx_func spi_grp[] = { FUNC("spi", 0, 7, 4) };
@@ -74,8 +74,8 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
 +static struct mtmips_pmx_func esd_grp[] = { FUNC("iot", 0, 47, 1) };
  
  static struct mtmips_pmx_func sd_mode_grp[] = {
- 	FUNC("jtag", 3, 22, 8),
-@@ -216,6 +226,7 @@ static struct mtmips_pmx_group mt76x8_pi
+ 	FUNC("sdxc jtag", 3, 22, 8),
+@@ -182,6 +192,7 @@ static struct mtmips_pmx_group mt76x8_pi
  	GRP("perst", perst_grp, 1, MT76X8_GPIO_MODE_PERST),
  	GRP("wdt", wdt_grp, 1, MT76X8_GPIO_MODE_WDT),
  	GRP("spi", spi_grp, 1, MT76X8_GPIO_MODE_SPI),
@@ -83,7 +83,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
  	GRP_G("sdmode", sd_mode_grp, MT76X8_GPIO_MODE_MASK,
  				1, MT76X8_GPIO_MODE_SDMODE),
  	GRP_G("uart0", uart0_grp, MT76X8_GPIO_MODE_MASK,
-@@ -257,7 +268,18 @@ static struct mtmips_pmx_group mt76x8_pi
+@@ -223,7 +234,18 @@ static struct mtmips_pmx_group mt76x8_pi
  
  static int mt76x8_pinctrl_probe(struct platform_device *pdev)
  {
diff --git a/target/linux/ramips/patches-6.12/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-6.12/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
index c19b0606a1..42620e6105 100644
--- a/target/linux/ramips/patches-6.12/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
+++ b/target/linux/ramips/patches-6.12/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
@@ -25,7 +25,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 
 --- a/drivers/mmc/host/Kconfig
 +++ b/drivers/mmc/host/Kconfig
-@@ -1059,6 +1059,8 @@ config MMC_OWL
+@@ -1089,6 +1089,8 @@ config MMC_OWL
  config MMC_SDHCI_EXTERNAL_DMA
  	bool
  
diff --git a/target/linux/ramips/patches-6.12/831-mmc-mtk-sd-initialize-pad-delay-and-drive-strength.patch b/target/linux/ramips/patches-6.12/831-mmc-mtk-sd-initialize-pad-delay-and-drive-strength.patch
index 7fd7b3af43..85159019b6 100644
--- a/target/linux/ramips/patches-6.12/831-mmc-mtk-sd-initialize-pad-delay-and-drive-strength.patch
+++ b/target/linux/ramips/patches-6.12/831-mmc-mtk-sd-initialize-pad-delay-and-drive-strength.patch
@@ -9,7 +9,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
 
 --- a/drivers/mmc/host/mtk-sd.c
 +++ b/drivers/mmc/host/mtk-sd.c
-@@ -75,8 +75,12 @@
+@@ -74,8 +74,12 @@
  #define MSDC_PATCH_BIT   0xb0
  #define MSDC_PATCH_BIT1  0xb4
  #define MSDC_PATCH_BIT2  0xb8
@@ -22,7 +22,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
  #define PAD_DS_TUNE      0x188
  #define PAD_CMD_TUNE     0x18c
  #define EMMC51_CFG0	 0x204
-@@ -402,6 +406,7 @@ struct mtk_mmc_compatible {
+@@ -407,6 +411,7 @@ struct mtk_mmc_compatible {
  	bool enhance_rx;
  	bool support_64g;
  	bool use_internal_cd;
@@ -30,7 +30,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
  };
  
  struct msdc_tune_para {
-@@ -539,6 +544,7 @@ static const struct mtk_mmc_compatible m
+@@ -545,6 +550,7 @@ static const struct mtk_mmc_compatible m
  	.stop_clk_fix = false,
  	.enhance_rx = false,
  	.use_internal_cd = true,
@@ -38,7 +38,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
  };
  
  static const struct mtk_mmc_compatible mt7622_compat = {
-@@ -1731,9 +1737,11 @@ static void msdc_init_hw(struct msdc_hos
+@@ -1738,9 +1744,11 @@ static void msdc_init_hw(struct msdc_hos
  	}
  	writel(0, host->base + MSDC_IOCON);
  	sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
@@ -53,7 +53,7 @@ Signed-off-by: Shiji Yang <yangshiji66 at outlook.com>
  	sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
  
  	if (host->dev_comp->stop_clk_fix) {
-@@ -1797,6 +1805,18 @@ static void msdc_init_hw(struct msdc_hos
+@@ -1814,6 +1822,18 @@ static void msdc_init_hw(struct msdc_hos
  				     MSDC_PAD_TUNE_RXDLYSEL);
  	}
  
diff --git a/target/linux/ramips/patches-6.12/835-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-6.12/835-asoc-add-mt7620-support.patch
index e53725d435..d4027c904a 100644
--- a/target/linux/ramips/patches-6.12/835-asoc-add-mt7620-support.patch
+++ b/target/linux/ramips/patches-6.12/835-asoc-add-mt7620-support.patch
@@ -19,7 +19,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 
 --- a/sound/soc/Kconfig
 +++ b/sound/soc/Kconfig
-@@ -99,6 +99,7 @@ source "sound/soc/mxs/Kconfig"
+@@ -107,6 +107,7 @@ source "sound/soc/mxs/Kconfig"
  source "sound/soc/pxa/Kconfig"
  source "sound/soc/qcom/Kconfig"
  source "sound/soc/rockchip/Kconfig"
@@ -29,7 +29,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
  source "sound/soc/sof/Kconfig"
 --- a/sound/soc/Makefile
 +++ b/sound/soc/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_SND_SOC)	+= kirkwood/
+@@ -60,6 +60,7 @@ obj-$(CONFIG_SND_SOC)	+= kirkwood/
  obj-$(CONFIG_SND_SOC)	+= pxa/
  obj-$(CONFIG_SND_SOC)	+= qcom/
  obj-$(CONFIG_SND_SOC)	+= rockchip/
diff --git a/target/linux/ramips/patches-6.12/840-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-6.12/840-serial-add-ugly-custom-baud-rate-hack.patch
index 663a9bfe7d..df360b380f 100644
--- a/target/linux/ramips/patches-6.12/840-serial-add-ugly-custom-baud-rate-hack.patch
+++ b/target/linux/ramips/patches-6.12/840-serial-add-ugly-custom-baud-rate-hack.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 
 --- a/drivers/tty/serial/serial_core.c
 +++ b/drivers/tty/serial/serial_core.c
-@@ -482,6 +482,9 @@ uart_get_baud_rate(struct uart_port *por
+@@ -503,6 +503,9 @@ uart_get_baud_rate(struct uart_port *por
  		break;
  	}
  
diff --git a/target/linux/ramips/patches-6.12/870-Input-sx951x-add-Semtech-SX9512-SX9513-driver.patch b/target/linux/ramips/patches-6.12/870-Input-sx951x-add-Semtech-SX9512-SX9513-driver.patch
index 9b724e9d52..8c2f9074b5 100644
--- a/target/linux/ramips/patches-6.12/870-Input-sx951x-add-Semtech-SX9512-SX9513-driver.patch
+++ b/target/linux/ramips/patches-6.12/870-Input-sx951x-add-Semtech-SX9512-SX9513-driver.patch
@@ -27,7 +27,7 @@ Signed-off-by: David Bauer <mail at david-bauer.net>
 
 --- a/drivers/input/keyboard/Kconfig
 +++ b/drivers/input/keyboard/Kconfig
-@@ -616,6 +616,17 @@ config KEYBOARD_SUNKBD
+@@ -604,6 +604,17 @@ config KEYBOARD_SUNKBD
  	  To compile this driver as a module, choose M here: the
  	  module will be called sunkbd.
  
@@ -47,7 +47,7 @@ Signed-off-by: David Bauer <mail at david-bauer.net>
  	depends on ARCH_SHMOBILE || COMPILE_TEST
 --- a/drivers/input/keyboard/Makefile
 +++ b/drivers/input/keyboard/Makefile
-@@ -66,6 +66,7 @@ obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stow
+@@ -65,6 +65,7 @@ obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stow
  obj-$(CONFIG_KEYBOARD_ST_KEYSCAN)	+= st-keyscan.o
  obj-$(CONFIG_KEYBOARD_SUN4I_LRADC)	+= sun4i-lradc-keys.o
  obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o




More information about the lede-commits mailing list