[openwrt/openwrt] mediatek: filogic: add support for TP-Link Festa FR365
LEDE Commits
lede-commits at lists.infradead.org
Sat Jul 12 11:23:07 PDT 2025
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/e507398b88322a69417de47b94942ab53dae4603
commit e507398b88322a69417de47b94942ab53dae4603
Author: Yonghyu Ban <yhban at silicon.moe>
AuthorDate: Wed Mar 19 17:29:04 2025 +0900
mediatek: filogic: add support for TP-Link Festa FR365
Hardware
--------
SOC : MediaTek MT7981B 2x A53
RAM : NT5AD256M16E4-JR 512MiB
Flash : ESMT F50L1G41LB 128MB
ETH : 5x 1GbE (1x WAN, 4x LAN)
1x SFP+ (2.5 GbE)
Switch : MediaTek MT7531AE
WiFi : MediaTek MT7976D
Buttons : Reset
Power : DC 12V 2A
Installation
------------
1. Disassemble the device
2. Create solder bridge on R85, R86, Solder 4-pin header on J4.
3. Connect UART console.
4. In U-Boot shell, enter the following commands to prepare flashing
```
enable_phy
extra_para set extra-para score 100
extra_para set extra-para fwFlag good
```
5. Use `mtkupgrade` command to TFTP flash openwrt-mediatek-filogic-tplink_fr365-v1-squashfs-factory.bin
6. Reboot the device
Signed-off-by: Yonghyu Ban <yhban at silicon.moe>
Link: https://github.com/openwrt/openwrt/pull/19203
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../linux/mediatek/dts/mt7981b-tplink-fr365v1.dts | 406 +++++++++++++++++++++
.../filogic/base-files/etc/board.d/01_leds | 5 +
.../filogic/base-files/etc/board.d/02_network | 7 +
.../etc/hotplug.d/firmware/11-mt76-caldata | 3 +
.../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 5 +
.../base-files/lib/preinit/09_mount_cfg_part | 3 +
.../base-files/lib/preinit/10_fix_eth_mac.sh | 10 +
.../filogic/base-files/lib/upgrade/platform.sh | 6 +
target/linux/mediatek/image/filogic.mk | 20 +
9 files changed, 465 insertions(+)
diff --git a/target/linux/mediatek/dts/mt7981b-tplink-fr365v1.dts b/target/linux/mediatek/dts/mt7981b-tplink-fr365v1.dts
new file mode 100644
index 0000000000..af6fa90d7e
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-tplink-fr365v1.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7981b.dtsi"
+
+/ {
+ model = "TP-Link FR365 v1";
+ compatible = "tplink,fr365-v1", "mediatek,mt7981";
+
+ aliases {
+ serial0 = &uart0;
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x20000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: led_status {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led_usb: led_usb {
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_sfp: led_sfp {
+ label = "green:sfp";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan: led_wlan {
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 34 GPIO_ACTIVE_LOW>;
+ };
+
+ led_port2_act: led_port2_act {
+ label = "green:port2_act";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_port2_linespeed: led_port2_linespeed {
+ label = "green:port2_linespeed";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ sfp1: sfp-1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c0>;
+ los-gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ maximum-power-milliwatt = <3000>;
+ tx-disable-gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+ð {
+ status = "okay";
+
+ gmac0: mac at 0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+ label = "port2";
+ };
+};
+
+&mdio_bus {
+ switch: switch at 1f {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand at 0 {
+ compatible = "spi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+
+ spi-max-frequency = <52000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "bl2";
+ reg = <0x0000000 0x0100000>;
+ read-only;
+ };
+
+ partition at 100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0080000>;
+ };
+
+ partition at 180000 {
+ label = "Factory";
+ reg = <0x0180000 0x0200000>;
+ read-only;
+ };
+
+ partition at 380000 {
+ label = "fip";
+ reg = <0x0380000 0x0200000>;
+ read-only;
+ };
+
+ partition at 580000 {
+ label = "ubi";
+ reg = <0x0580000 0x2400000>;
+ compatible = "linux,ubi";
+
+ volumes {
+ ubi_rootdisk: ubi-volume-fit {
+ volname = "kernel";
+ };
+ };
+ };
+
+ partition at 2980000 {
+ label = "ubi.b";
+ reg = <0x2980000 0x2400000>;
+
+ volumes {
+ ubi_rootdisk_2: ubi-volume-fit {
+ volname = "kernel";
+ };
+ };
+ };
+
+ partition at 4d80000 {
+ label = "support-list";
+ reg = <0x4d80000 0x0020000>;
+ read-only;
+ };
+
+ partition at 4da0000 {
+ label = "user-config";
+ reg = <0x4da0000 0x0a00000>;
+ read-only;
+ };
+
+ partition at 57a0000 {
+ label = "partition-table";
+ reg = <0x57a0000 0x0020000>;
+ read-only;
+ };
+
+ partition at 57c0000 {
+ label = "device-info";
+ reg = <0x57c0000 0x0020000>;
+ read-only;
+ };
+
+ partition at 57e0000 {
+ label = "device-info.b";
+ reg = <0x57e0000 0x0020000>;
+ read-only;
+ };
+
+ partition at 5800000 {
+ label = "tddp";
+ reg = <0x5800000 0x0020000>;
+ read-only;
+ };
+
+ partition at 5820000 {
+ label = "tddp.b";
+ reg = <0x5820000 0x0020000>;
+ read-only;
+ };
+
+ partition at 5840000 {
+ label = "extra-para-ubi";
+ reg = <0x5840000 0x0200000>;
+ };
+
+ partition at 5a40000 {
+ label = "firmware-info";
+ reg = <0x5a40000 0x0020000>;
+ read-only;
+ };
+
+ partition at 5a60000 {
+ label = "firmware-info.b";
+ reg = <0x5a60000 0x0020000>;
+ read-only;
+ };
+
+ partition at 5a80000 {
+ label = "log";
+ reg = <0x5a80000 0x0200000>;
+ read-only;
+ };
+
+ partition at 5c80000 {
+ label = "log.b";
+ reg = <0x5c80000 0x0200000>;
+ read-only;
+ };
+
+ partition at 5e80000 {
+ label = "wlan";
+ reg = <0x5e80000 0x0500000>;
+ read-only;
+ };
+
+ partition at 6380000 {
+ label = "wlan.b";
+ reg = <0x6380000 0x0500000>;
+ read-only;
+ };
+
+ partition at 6880000 {
+ label = "database";
+ reg = <0x6880000 0x1100000>;
+ read-only;
+ };
+
+ partition at 7980000 {
+ label = "log_recovery";
+ reg = <0x7980000 0x0080000>;
+ read-only;
+ };
+
+ partition at 7a00000 {
+ label = "panic-oops";
+ reg = <0x7a00000 0x0080000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&switch {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "port3";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "port4";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "port5";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "port6";
+ };
+
+ port at 5 {
+ reg = <5>;
+ label = "port1";
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ sfp = <&sfp1>;
+ };
+
+ port at 6 {
+ reg = <6>;
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+ };
+};
+
+&pio {
+ i2c0_pins: i2c0-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c0_1";
+ };
+ };
+
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+ mediatek,u3p-dis-msk = <0x01>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 19e815b415..53df9106f2 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -184,6 +184,11 @@ smartrg,sdg-8733a)
ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:08:orange:wan" "wan" "link_100 link_1000"
ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:08:white:wan" "wan" "link_10000"
;;
+tplink,fr365-v1)
+ ucidef_set_led_netdev "port2-green-act" "port-2" "green:port2_act" "port2" "link tx rx"
+ ucidef_set_led_netdev "port1-green-act" "port-1" "green:sfp" "port1" "link tx rx"
+ ucidef_set_led_netdev "wlan" "wlan" "green:wlan" "phy1-ap0"
+ ;;
tplink,re6000xd)
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-0" "lan1" "link tx rx"
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-1" "lan2" "link tx rx"
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 17fb2bddd1..453594c5e0 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -133,6 +133,9 @@ mediatek_setup_interfaces()
mercusys,mr90x-v1-ubi)
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
;;
+ tplink,fr365-v1)
+ ucidef_set_interfaces_lan_wan "port1 port3 port4 port5 port6" "port2"
+ ;;
tplink,tl-xdr6086|\
wavlink,wl-wn586x3)
ucidef_set_interfaces_lan_wan "lan1 lan2" eth1
@@ -212,6 +215,10 @@ mediatek_setup_macs()
wan_mac=$label_mac
lan_mac=$(macaddr_add "$label_mac" 1)
;;
+ tplink,fr365-v1)
+ lan_mac=$(strings /dev/mtd11 | grep 'option macaddr' | awk -F"'" '{print $2}')
+ wan_mac="$(macaddr_add $lan_mac 1)"
+ ;;
xiaomi,mi-router-ax3000t|\
xiaomi,mi-router-ax3000t-ubootmod|\
xiaomi,mi-router-wr30u-stock|\
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
index 1d9db845db..bfc0511164 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
@@ -13,6 +13,9 @@ case "$FIRMWARE" in
ln -sf /tmp/tp_data/MT7981_EEPROM.bin \
/lib/firmware/$FIRMWARE
;;
+ tplink,fr365-v1)
+ ln -sf /tmp/wlan/radio /lib/firmware/$FIRMWARE
+ ;;
ubnt,unifi-6-plus)
caldata_extract_mmc "factory" 0x0 0x1000
;;
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index b447dbdfe3..04ec47ee14 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -170,6 +170,11 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
;;
+ tplink,fr365-v1)
+ addr=$(strings /dev/mtd11 | grep 'option macaddr' | awk -F"'" '{print $2}')
+ [ "$PHYNBR" = "0" ] && echo $addr > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+ ;;
tplink,tl-xdr4288|\
tplink,tl-xdr6086|\
tplink,tl-xdr6088)
diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/09_mount_cfg_part b/target/linux/mediatek/filogic/base-files/lib/preinit/09_mount_cfg_part
index ddbb1d1293..1ef2c7c267 100644
--- a/target/linux/mediatek/filogic/base-files/lib/preinit/09_mount_cfg_part
+++ b/target/linux/mediatek/filogic/base-files/lib/preinit/09_mount_cfg_part
@@ -19,6 +19,9 @@ preinit_mount_cfg_part() {
tplink,re6000xd)
mount_ubi_part "tp_data" "tp_data"
;;
+ tplink,fr365-v1)
+ mount_ubi_part "wlan" "ubi_wlan_factory_data"
+ ;;
*)
;;
esac
diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
index 936ed44ff9..5b9e5bd7ad 100644
--- a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh
@@ -33,6 +33,16 @@ preinit_set_mac_address() {
addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
ip link set dev eth1 address "$(macaddr_add $addr 1)"
;;
+ tplink,fr365-v1)
+ lan_mac=$(strings /dev/mtd11 | grep 'option macaddr' | awk -F"'" '{print $2}')
+ wan_mac="$(macaddr_add $lan_mac 1)"
+ ip link set dev port2 address "$wan_mac"
+ ip link set dev port1 address "$lan_mac"
+ ip link set dev port3 address "$lan_mac"
+ ip link set dev port4 address "$lan_mac"
+ ip link set dev port5 address "$lan_mac"
+ ip link set dev port6 address "$lan_mac"
+ ;;
*)
;;
esac
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index 2a05b9b10c..e08e265ab3 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -153,6 +153,12 @@ platform_do_upgrade() {
CI_UBIPART="ubi0"
nand_do_upgrade "$1"
;;
+ tplink,fr365-v1)
+ CI_UBIPART="ubi"
+ CI_KERNPART="kernel"
+ CI_ROOTPART="rootfs"
+ nand_do_upgrade "$1"
+ ;;
nradio,c8-668gl)
CI_DATAPART="rootfs_data"
CI_KERNPART="kernel_2nd"
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 6530463213..97092e36e9 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -1760,6 +1760,26 @@ define Device/tplink_re6000xd
endef
TARGET_DEVICES += tplink_re6000xd
+define Device/tplink_fr365-v1
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := FR365
+ DEVICE_VARIANT := v1
+ DEVICE_DTS := mt7981b-tplink-fr365v1
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 32768k
+ KERNEL_IN_UBI := 1
+ IMAGES += factory.bin
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/factory.ubi := append-ubi | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := fitblk kmod-sfp kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
+endef
+TARGET_DEVICES += tplink_fr365-v1
+
define Device/tplink_tl-xdr-common
DEVICE_VENDOR := TP-Link
DEVICE_DTS_DIR := ../dts
More information about the lede-commits
mailing list