[openwrt/openwrt] realtek: Switch DGS-1210-10P DTS to gpio.dtsi

LEDE Commits lede-commits at lists.infradead.org
Mon Jan 27 22:31:09 PST 2025


svanheule pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/7c0d1c1eb10a7040af6478742dd053f40b24a467

commit 7c0d1c1eb10a7040af6478742dd053f40b24a467
Author: Sander Vanheule <sander at svanheule.net>
AuthorDate: Sun Jan 12 17:53:34 2025 +0100

    realtek: Switch DGS-1210-10P DTS to gpio.dtsi
    
    The DTS file for the DGS-1210-10P is slightly different from the other
    DGS-1210 devices, in that it didn't specify a gpio-restart node when it
    was added. The gpio-restart has been found to work on the DGS-1210-10P
    as well, so switch it over to the common definitions.
    
    This converts the last device from the product family to the common
    definition for the (external) GPIOs.
    
    Tested-by: Michel Thill <jmthill at gmail.com>
    Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 .../realtek/dts/rtl8382_d-link_dgs-1210-10p.dts    | 29 ++++++----------------
 1 file changed, 7 insertions(+), 22 deletions(-)

diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts
index 1aef88afd4..9365f94a50 100644
--- a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts
+++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts
@@ -2,6 +2,7 @@
 
 #include "rtl838x.dtsi"
 #include "rtl83xx_d-link_dgs-1210_common.dtsi"
+#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
 
 / {
 	compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
@@ -43,23 +44,6 @@
 		tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 	};
 
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		mode {
-			label = "mode";
-			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LIGHTS_TOGGLE>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 33 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
 	leds {
 		link_act {
 			label = "green:link_act";
@@ -76,12 +60,13 @@
 			gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
+&keys {
+	mode {
+		label = "mode";
+		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_LIGHTS_TOGGLE>;
 	};
 };
 




More information about the lede-commits mailing list