[openwrt/openwrt] mediatek: cudy: fixes 2.5G PHY interrupt support

[LEDE Commits]

dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/82b69dfaf6ca92eeffb7523295d3d81a1d54323a

commit 82b69dfaf6ca92eeffb7523295d3d81a1d54323a
Author: Chukun Pan <amadeus at jmu.edu.cn>
AuthorDate: Mon Dec 9 23:17:06 2024 +0800

    mediatek: cudy: fixes 2.5G PHY interrupt support
    
    Fixed interrupt support for 2.5G PHY.
    Removed useless phy-mode on phy node.
    
    Tested on Cudy TR3000.
    Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
---
 target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts  | 8 +++-----
 target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts | 9 ++++-----
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts
index b1797157ac..abe40403af 100644
--- a/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts
+++ b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts
@@ -77,7 +77,6 @@
 &eth {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
-
 	status = "okay";
 
 	gmac0: mac at 0 {
@@ -105,12 +104,11 @@
 	rtl8221b_phy: ethernet-phy at 1 {
 		compatible = "ethernet-phy-ieee802.3-c45";
 		reg = <1>;
-
-		reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
-
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
 		reset-assert-us = <100000>;
 		reset-deassert-us = <100000>;
+		reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&pio>;
 	};
 };
 
diff --git a/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
index 31a2cf5194..2591de8520 100644
--- a/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
+++ b/target/linux/mediatek/dts/mt7981b-cudy-tr3000-v1.dts
@@ -81,7 +81,6 @@
 &eth {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
-
 	status = "okay";
 
 	gmac0: mac at 0 {
@@ -105,13 +104,13 @@
 
 &mdio_bus {
 	phy1: phy at 1 {
-		reg = <1>;
 		compatible = "ethernet-phy-ieee802.3-c45";
-		phy-mode = "2500base-x";
-		reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		reg = <1>;
 		reset-assert-us = <100000>;
 		reset-deassert-us = <100000>;
+		reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&pio>;
 		realtek,aldps-enable;
 	};
 };