[openwrt/openwrt] ltq-vdsl-vr11: add option for L3 request without retry on failure

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/03bbd36e67e5f4cc9fa838c7d773077c05f6ce16

commit 03bbd36e67e5f4cc9fa838c7d773077c05f6ce16
Author: Jan Hoffmann <jan at 3e8.eu>
AuthorDate: Thu Jan 30 11:19:29 2025 +0100

    ltq-vdsl-vr11: add option for L3 request without retry on failure
    
    This allows to attempt an orderly shutdown via L3 request while avoiding
    excessive delay in the failure case (up to 6 seconds with the currently
    hard-coded 3 attempts).
    
    Signed-off-by: Jan Hoffmann <jan at 3e8.eu>
    Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250130102108.1606919-2-jan@3e8.eu/
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 package/kernel/lantiq/ltq-vdsl-vr11/Makefile       |  2 +-
 .../patches/300-l3-request-no-retry.patch          | 46 ++++++++++++++++++++++
 2 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/package/kernel/lantiq/ltq-vdsl-vr11/Makefile b/package/kernel/lantiq/ltq-vdsl-vr11/Makefile
index 99d6e35376..50432986e2 100644
--- a/package/kernel/lantiq/ltq-vdsl-vr11/Makefile
+++ b/package/kernel/lantiq/ltq-vdsl-vr11/Makefile
@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr11
 PKG_VERSION:=4.23.1
-PKG_RELEASE:=3
+PKG_RELEASE:=4
 PKG_BASE_NAME:=dsl_cpe_api
 
 UGW_VERSION=8.5.2.10
diff --git a/package/kernel/lantiq/ltq-vdsl-vr11/patches/300-l3-request-no-retry.patch b/package/kernel/lantiq/ltq-vdsl-vr11/patches/300-l3-request-no-retry.patch
new file mode 100644
index 0000000000..818f676b32
--- /dev/null
+++ b/package/kernel/lantiq/ltq-vdsl-vr11/patches/300-l3-request-no-retry.patch
@@ -0,0 +1,46 @@
+Add option for L3 request without retry on failure
+
+This allows to attempt an orderly shutdown via L3 request while avoiding
+excessive delay in the failure case (up to 6 seconds with the currently
+hard-coded 3 attempts).
+--- a/src/g997/drv_dsl_cpe_api_g997_vrx.c
++++ b/src/g997/drv_dsl_cpe_api_g997_vrx.c
+@@ -1053,6 +1053,7 @@ DSL_Error_t DSL_DRV_DEV_G997_PowerManage
+ {
+    DSL_Error_t nErrCode = DSL_SUCCESS, nRet = DSL_SUCCESS;
+    DSL_int_t nAttempt = 0, i = 0;
++   DSL_int_t nAttemptCount = DSL_LX_TO_L3_ATTEMPT_COUNT;
+    const DSL_int_t nMaxRetry = DSL_LX_TO_L3_TIMEOUT/DSL_L3_WAIT_INTERVAL;
+    DSL_G997_PowerManagementStatusData_t PmStatus = {DSL_G997_PMS_NA};
+    DSL_VRX_L3RequestStatus_t L3RequestStatus = DSL_VRX_L3_STATUS_NA;
+@@ -1095,11 +1096,15 @@ DSL_Error_t DSL_DRV_DEV_G997_PowerManage
+       nErrCode = DSL_ERR_NOT_SUPPORTED_BY_DEVICE;
+       break;
+ 
++   case DSL_G997_PMSF_LX_TO_L3_NO_RETRY:
++      nAttemptCount = 1;
++      fallthrough;
++
+    case DSL_G997_PMSF_LX_TO_L3:
+       if (PmStatus.nPowerManagementStatus != DSL_G997_PMS_L3)
+       {
+          /* retry it DSL_LX_TO_L3_ATTEMPT_COUNT times */
+-         for (nAttempt = 0; nAttempt < DSL_LX_TO_L3_ATTEMPT_COUNT; nAttempt++)
++         for (nAttempt = 0; nAttempt < nAttemptCount; nAttempt++)
+          {
+             /* L3 shutdown request*/
+             nErrCode = DSL_DRV_VRX_SendMsgShutdownRequest(pContext);
+--- a/src/include/drv_dsl_cpe_api_g997.h
++++ b/src/include/drv_dsl_cpe_api_g997.h
+@@ -1199,7 +1199,10 @@ typedef enum
+    procedure. After reaching the L3 state, the line shall remain in the L3 idle
+    state until it is forced into another state through this configuration
+    parameter. */
+-   DSL_G997_PMSF_LX_TO_L3 = 3
++   DSL_G997_PMSF_LX_TO_L3 = 3,
++   /**
++   Same as above, but does not retry in case of failure. */
++   DSL_G997_PMSF_LX_TO_L3_NO_RETRY = 4
+ } DSL_G997_PowerManagementStateForce_t;
+ 
+ /**